Metal material production process machinery is becoming larger due to the development of industry. Since there are many overseas manufacturers of large machines used in industrial fields, there are limitations in investigating the manufacturer's noise prediction method and measurement method. A noise map was prepared to obtain information necessary for noise reduction and to effectively manage noise companies. It was modeled with the drawings provided to prepare the noise map and the results of the actual measurement of the site. In order to improve the noise environment of workers, there was a noise reduction effect when a soundproof wall was installed between the noise source and the worker's workplace.

The most comprehensive and particularly reliable method for non-destructively measuring the residual stress of the surface layer of metals is the sin method. When X-rays were used the relationship of sin measured on the surface layer of the processing metal did not show linearity when the sin method was used. In this case, since the effective penetration depth changes according to the changing direction of the incident X-ray,  becomes a sin function. Since  cannot be used as a constant, the relationship in sin cannot be linear. Therefore, in this paper, the orthogonal function method according to Warren’s diffraction theory and the basic profile of normal distribution were synthesized, and the X-ray diffraction profile was calculated and reviewed when there was a linear strain (stress) gradient on the surface. When there is a strain gradient, the X-ray diffraction profile becomes asymmetric, and as a result, the peak position, the position of half-maximum, and the centroid position show different values. The difference between the peak position and the centroid position appeared more clearly as the strain (stress) gradient became larger, and the basic profile width was smaller. The weighted average strain enables stress analysis when there is a strain (stress) gradient, based on the strain value corresponding to the centroid position of the diffracted X-rays. At the 1/5 max height of X-ray diffraction, the position where the diffracted X-ray is divided into two by drawing a straight line parallel to the background, corresponds approximately to the centroid position.

There is a considerable amount of research on metal material product worker’s hearing loss caused by noise that comes from manufacturing process. A further investigation that characterizes the sound that comes from manufacturing process of metal material products. however. To do this, a noise management plan is needed. It should include a generated sound process from the main sources of disturbance at manufacturing process areas. And a soundproof measurement will identify the amount of noise reduction needed for a hearing-safe working environment. Finally, researchers in this study measured tests on the noise and the vibration process, and the noise caused by operations allowed for an investigation on the suitability of certain environmental conditions. Noise-related programs can be used to predict the noise distribution of the noise level characteristic. This can help identify and reduce the presence of sound interference through sound proofing measures.

중금속은 생체 내에서 분해되지 않고 장기간에 걸쳐 축적되는 특성으로 도시의 생물 다양성을 위협하는 위험한 오염물질 중 하나이다. 도시지역의 대기 중 중금속오염을 평가하기 위해 중금속 노출 정도에 따라 생물 체내의 축적농도 를 비교하는 생물학적 모니터링의 필요성이 요구되고 있다. 본 연구는 중금속 모니터링 시료로서 둥지 재료의 활용 가능성을 검토하고 중금속이 박새과 조류에 미치는 영향을 파악하기 위해 수행되었다. 연구지역은 충청남도 천안시 소재 대학교 캠퍼스 내 녹지공간(14개), 도시산림(11개), 도시공원(29개)으로 총 54개의 인공새집이 설치되었다. 조류 이용률은 도시공원 6/29개(20.68%), 캠퍼스 내 녹지공간 11/14개(78.57%), 도시산림 8/11개(72.72%)로 나타났다. 수거한 둥지로부터 이끼 재료를 채취하였고 중금속 분석을 통하여 도시녹지 유형별 중금속축적특성과 중금속이 박새과 조류의 이소 성공 여부에 미치는 영향을 비교하였다. 분석결과 아연의 평균 농도는 228.08±209.62㎍/dry g, 납의 평균 농도는 17.67±6.72㎍/dry g로 나타났다. 도시녹지 유형별 아연농도는 유의한 차이를 나타내지 않았으나(Kruskal- Wallis test, p-value=0.28) 납 농도는 유의한 차이를 보였다(Kruskal-Wallis test, p<0.05*). 중금속 분석을 진행한 21개 의 박새과 조류 둥지 중 11개(52.38%)의 둥지에서 조류의 이소가 관찰되었다. 각 도시녹지 유형에서 관찰된 조류의 이소는 캠퍼스 내 녹지공간 7개(77.78%), 도시산림 6개(85.71%), 도시공원 1개(20%)로 주로 도시산림과 캠퍼스 내 녹지공간에서 이소가 확인되었다. 박새과 조류의 이소 성공 여부에 중금속 축적특성이 미치는 영향을 확인하기 위해 중금속 농도를 비교하였으나 통계적으로 유의한 차이는 나타나지 않았다(Zn : W=44, p-value=0.74, Pb : t=0.64676, df =7.2422, p-value =0.54). 본 연구는 박새과 둥지 재료를 중금속 모니터링 시료로 사용한 기초 연구로 비침습적인 생물학적 모니터링의 기초자료로 활용될 수 있을 것으로 판단된다.

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUIDVSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 108 cm3g1. Corrosion tests of zirconiumbased alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 A/cm2. The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

본 연구에서는 다공성 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료와 “이온젤” 이라고 불리는 고분자 고체 전해질을 이용하여 슈퍼커패시터를 제작 하였으며, 금속유기골격체의 함량에 따른 전기화학적 거동을 관찰하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)으로 분석하였으며, 그 결과로, 다공성 활성탄소 대비 금속유기골격체를 0.5 wt% 첨가 하였을 때 가장 높은 전기용량값을 확인 할 수 있었으며, 0.5 wt% 이상의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며, 이러한 결과를 바탕으로 제조된 다공성 활성탄소/금속유기골격체 복합재료 기반의 슈퍼커패시터는 다양한 분야에 활용이 가능 할 것으로 판단된다.

Natural gas is the most realistic fuel among eco-friendly fuels. Natural gas production is limited, and in Korea, it is supplied and utilized in the form of liquefied natural gas (LNG). In the case of LNG, the vaporization point is 163 degrees below zero, so ordinary metal cannot be used due to its brittleness. The International Maritime Organization (IMO) defines metals that can be used in the IGC Code, and is used for storage containers, transportation containers, etc. based on the metals. Welding is essential in the manufacture of large structures such as LNG storage tanks. In this study, weldability studies related to cryogenic materials were conducted. In Part I of this study, high-manganese steel and part II were studied for two types of stainless steel (STS304L, STS316L), and in Part III, aluminum (AL5083). During laser welding, the shape of the Bead on Plate (BOP) was analyzed, and a total of nine cases were analyzed using laser power and welding speed as variables. It was confirmed that the penetration and the width of the welding width were linearly proportional to the amount of heat input. Based on this study, it is possible to conduct a follow-up study to find the optimal welding conditions for butt welding and fillet welding.

As the part of efforts to respond to the environmental pollution, the demand for clean energy is increasing. Natural gas is one of the most realistic alternatives, and interest in the storage and transportation containers to utilize the natural gas is growing. The production area of ​​natural gas is limited, and in Korea, it is imported in the form of liquefied natural gas. LNG is a cryogenic state with a vaporization point of -163°C, so the ordinary metal cannot be used due to its brittleness. The international maritime organization (IMO) defines the metals that can handle LNG in the IGC Code, and the research is ongoing. This study was a preliminary study to check the weldability of related metals and confirmed the shape of bead on plate (BOP) during the laser welding for each material. In part I, a study was conducted on the high manganese steel, and in part II, a study was conducted on the materials of STS304L and STS316L among the stainless steel. Based on this study, it can be used as an optimal welding condition for the butt and fillet welding.

As demand for eco-friendly energy increases, demand for natural gas and Liquefied natural gas (LNG) storage technologies continues to increase. LNG is a cryogenic environment with a temperature of -163°C, so ordinary metals cannot be used due to brittleness. Accordingly, IGC Code designates the cryogenic materials such as Invar, STS304L, Al5083-0, and High Manganese Steel. For fabricating those materials, research on welding possibility is the most important. Thus this study focused on the possibility of laser welding of the cryogenic materials. The weldability of High Manganese Steel was researched in this paper, the shape and the dimensions of the beads after bead on plate (BOP) welding were observed. The experiment was conducted on a total of 25 cases with laser power and welding speed of 5 cases each, and the width, height, and penetration of the beads were confirmed. It was confirmed that the paramenter of bead increased linearly with the laser power, and the paramenters of bead increased linearly with decreasing welding speed. Based on this study, high manganese steel can be applied in various industries by applying it to butt welding.

본 연구에서는 “이온젤” 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전 해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전 고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작 하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특 성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었 다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료 되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다

Metal matrix composites (MMCs), which are a combination of two or more constituents with different physical or chemical properties, are today receiving great attention in various areas, as they have high specific strength, corrosion resistance, fatigue strength, and good tribological properties. This paper presents a research review on the combination of matrix and reinforced materials, fabrication processes, and application status of metal matrix composites. In this paper, we aim to discuss and review the importance of metal composite materials as advanced materials that can be used in various applications such as transportation, defense, sports, and extreme environments. In addition, the applicability and technology development trends in new process technology fields such as additive manufacturing of metal composites will be described.

Recently, as the quality of life of modern people improves, interest in environmental noise is gradually increasing. As the public's awareness of environmental rights increased, it was necessary to grasp the actual condition of the noise source and systematic noise management plan. The data is expected to be used as a response to noise-related complaints. As a result measured using the factory noise monitoring system, the amount of data measured every 5 minutes from 00:00 to 24:00 can obtain 288 noise levels and frequency characteristics per day, and frequency using 1/3 octave-band. The analysis reveals what frequency range affects the noise from the metal working plant near the office. In addition, it can be seen that it is possible to compare with the reference value by using the stored data divided into night time, day time, and evening time for each time zone, and it is determined that it is possible to secure smooth data about the noise source to be measured.

The purpose of this study was to establish the noise characteristics of noise sources and the corresponding noise reduction measures during each manufacturing process closest to the workers in the metalworking factory. To this end, the noise generated in the manufacturing process of metal products was measured and analyzed, and the frequency characteristics of noise sources and the causes of noise were identified. The noise map was used to predict the noise reduction effect. Moreover, it is expected that this will ultimately contribute to the reduction of human risks caused by the noise of the civil environment around metalworking factories.

There is a considerable amount of research on metal material product worker’s hearing loss caused by noise that comes from manufacturing process. A further investigation that characterizes the sound that comes from manufacturing process of metal material products. however. To do this, a noise management plan is needed. It should include a generated sound process from the main sources of disturbance at manufacturing process areas. And a soundproof measurement will identify the amount of noise reduction needed for a hearing-safe working environment. Finally, researchers in this study measured tests on the noise and the vibration process, and the noise caused by operations allowed for an investigation on the suitability of certain environmental conditions. Noise-related programs can be used to predict the noise distribution of the noise level characteristic. This can help identify and reduce the presence of sound interference through sound proofing measures.

우수농산물 생산이 버섯 품목에도 확대가 진행되고 있는 실정에서 국내의 버섯 생산에 사용되고 있는 수입 버섯배지 재료의 안전성에 대한 자료를 얻고자 느타리와 양송이의 재배에 사용되는 수입 버섯배지 재료로 부터 영양요소, 중금속, 농약 등을 조사하였다. 2015년 수분, 조회분, 조단백, 조지방, 조섬유 등의 영양성분 을 조사한 결과 수분은 6.68%에서 59%로 재료의 종류에 따라 차이가 있었다. 조회분은 0.66 – 13.15% 조지 방은 0.62 – 7.29% 수준이었다. 조단백은 중국 면실박과 인도네시아 케이폭박이 28 – 37% 수준으로 다른 배지재료 2.8 – 8.7% 수준 보다 월등히 높았다. 조섬유 또한 6.9에서 50.8%까지 재료 간에 커다란 차이를 보였다. 2016년 조사 또한 각 배지 재료간에 영양성분의 함량 차이가 존재함을 볼 수 있었다. 흥미롭게도 2015년 도와 달리 중국 면실박은 조단백이 8.6% 수준으로 함량이 크게 떨어졌다. 이집트 비트펄프에서 48% 가장 높게 검출되었다. 중금속의 경우 2015년은 인도 면실피와 독일 피트모스에서 납이 2 - 3.7 ug/g, 수은은 캐나 다와 독일 피트모스, 파티스탄 밀짚에서 소량 0.01 - 0.02 ug/g, 니켈은 인도 면실피, 이집트 비트펄프, 파키 스탄 밀집에서 1.92 - 2.08 ug/g 수준으로 각각 검출되었다. 비소와 카드뮴은 모든 시료에서 검출되지 않았다. 구리는 캐나다 피트모스를 제외 하고는 다른 모든 시료에서 1.85 –28.26 ug/g 수준으로 검출되었다. 2016 년에는 인도 면실피와 캐나다 피트모스에서 납이 2.17 – 2.5 ug/g, 캐나다 피트모스에서 수은 0.02 ug/g, 이집 트 비트펄프, 호주 밀짚, 캐나다 피트모스 등에서 구리가 2.08 – 4.17 ug/g 수준으로 검출되었다. 비소, 니켈, 카드뮴은 모든 시료에서 불검출 되었다. 농약은 2015년의 경우 검출되지 않았으나 2016년의 경우 이집트산 비트펄프에서 imidacloprid가 0.0004mg/kg, thiamethoxam이 0.0001 mg/kg 가 각각 검출되었다. 본 연구에서는 수입된 버섯배지 재료의 출처와 년도에 따라 영양성분, 중금속, 농약 등의 함량이 달리 존재 한다는 것을 확인하였다.

Assessment of noise exposed population is to check the environment noise level and social influence in order to reduce the risks such as annoyance and disturbance that are generated by environmental noise. Also, this method suggests the preferential noise abatement policy and action plan by accurately finding the area that the noise causes harmful effect to human health. Recently, a noise map, which can predict noise in comprehensive area, is used for the assessment of noise exposed population, breaking from the methods using existing measures. In particular, countermeasure for noise can be considered more effectively by using assessment methods of noise exposed population for specific noise level, area, and building types which are the main input factors in noise maps. In this study, we propose noise reduction ranking decision at manufacturing process of metal material products due to noise map.