In this paper, the mean and fluctuating pressure coefficients derived from the results of wind tunnel tests on closed and open dome roofs were analyzed. The distribution characteristics of the fluctuating pressure according to the opening ratio and the height change were discussed. The analysis results showed that when the roof is open, the overall wind pressure decreases due to the open space, but more fluctuation occurred than the closed dome roof.

탄성계수와 함께 포아송비는 구조의 거동을 결정하는 중요 구조인수중의 하나이다. 따라서 구조응답의 불확실성에 미치는 포아송비의 독립적 영향에 대한 평가가 필요하다. 본 연구에서는 포아송비의 불확실성이 복합적층판의 거동 에 미치는 영향을 산정하기 위한 정식화를 제안한다. 포아송비의 영향은 동일 차수인 임의인수의 영향을 포함하는 부행렬을 통하여 얻을 수 있으며, 이는 대상 인수의 평균을 중심으로 한 Taylor전개를 통하여 구할 수 있다. 제안 방법의 검증을 위하여 예제 평판을 해석하였고, 그 결과를 몬테카를로 해석에 의한 결과와 비교하였다. 두 방법을 통하여 얻은 결과는 상화 잘 일치하는 결과를 나타내어, 제안한 방법이 적절함을 제시하였다.

본 논문은 고층건축물의 비틀림방향 응답을 평가하기 위하여 필요한 변동비틀림모멘트계수와 변동비틀림모멘트의 파워스펙트럼밀도계수의 경험식을 제안한 연구이다. 이러한 경험식을 제안하기 위하여, 다양한 형상비와 변장비를 가진 27개의 각주형 모형을 제작한 후 노풍도을 다양하게 변화시켜 풍력실험 을 실시하였다. 본 논문에서 비틀림방향 변동풍력의 경험식은 주로 건물의 노풍도와 형상비 그리고 변장비에 의하여 분석되어졌다.

  Recently, the control chart is developed for monitoring processes with normal short production runs by the coefficient of variation(CV) characteristic for a normal distribution. This control chart does not work well in non-normal short production runs.

The coefficient of variation(CV) which is a relatively dimensionless measure of variability is widely used to describe the variation of sample data. But little research is available to its distribution, confidence interval and interpret method etc. In this paper, we give an outline of statistical properties of coefficient of variation and design of control chart based on this statistic. Construction procedures of control chart are presented. The proposed control chart is an efficient method to monitoring a process variation for multiple product processes. Futhermore, the performance is evaluated by average run length(ARL).

The traditional control charts have a problem that a control limits are placed to depend on the accuracy of estimate of parameters. This problem caused high false alarm rate. In this paper, we review the uncertainty of control limits and propose the methods which have more reliable control limits using a coefficient of variance. Further more, we present a efficient methods that can control a different type of quality characteristics at the same time. The Weibull distribution is used to modeling the control chart. This type control chart may be useful tools in the short production runs.

This paper stated the variation of the hydrodynamic resistant coefficient K of hand knitting plane model net which was set perpendicularly to the flow of water. The scale of the model net was determined after Tauti's principle for similarity law and experi nent was conducted for measuring the coefficients about two cases of the nets composed of flat knot (reef knot) and trawlers knot(sheet bent). The scale of the model nets which was used in experiment were 1/10, 1/20, 1/30, 1/40, 1/50, 1/60, 1/70, 1/80, 1/90 and full scale. The result of this experiment in circulating water tank came to the conclusion that; a. The hydrodynamic coefficient of trawler knotted net showed about 0.55 higher than the flat knotted net. b. The value of K coincided approximately with the value estimated by the formulae which H. Miyamoto, M. Nomura and Y. shimozaki calculated from experiment. c. The hydrodynamic coefficient K were not varied when the scale ratio was larger than 1/50, the value of K was increased gradually from 1/60 and suddenly increased at 1/80 and 1/90. Therefore, when we design a model net it is appropriate to restrict the scale ratio to less than 1/50, under the condition that the velocity of the full scale is 1.3 knot in this experiment.

일반적으로수위-유량관계곡선식은선형성과등분산성가정을기반으로구축되지만, 측정단면의형태, 단면상·하류의지형요인등으로 인하여 영향을 받기 때문에 실질적인 수위 및 유량의 관계는 관계식 구축에 이용되는 가정에 위배된다. 이로 인한 오차를 줄이기 위하여 곡선식을분할하여이용하고있으나, 측정단면의변화를 고려한관계자의주관적인판단이구간분할의주요근거로이용되고있다. 따라서 본연구에서는이러한주관성을배제하고관측데이터를기반으로객관화된분할근거를제시하고자한다. 곡선식의구간분할을위하여변동계수 를이용한기존의연구를바탕으로변동계수가정규분포를따르는것으로가정하여, 계산된변동계수가전단계에서계산된95%신뢰구간 이내에존재하지않는경우구간을분할하였다. 즉, 변동계수를이용하여집단간의특성을비교하였으며, 변동계수의분포를이용하여분할을 위한기준값을제시하였다. 방법론의추정능력검토를위하여가상의곡선으로부터생성된데이터에제안된방법론을적용하였고, 실제유역에 적용성 검토를 위하여 금강에 위치한 무주 및 산계교 수위관측소 지점에 적용하였다. 결과적으로 자동으로 분할된 관계곡선식을 사용하여 추정의정확도를높일수있을뿐만아니라외삽을하는경우역시그정확도를향상할수있음을확인하였다. 마지막으로실측값을활용한 수위-유량관계곡선식의구축시구간분할전·후의잔차데이터에대하여Shapiro-wilk 정규성검정을수행하였으며, 구간분할후잔차가 정규성을 갖게 되는 것으로 나타났다.

The purpose of this research is to evaluate the standard deviation and coefficient of variation for flexural strength of lathe scrap reinforced cementitious composites. For this purpose, the cementitious composites containing lathe scrap were repeatedly made 5 times for water-binder ratio of 30%, 2mm width and 40mm length of lathe scrap, and then the standard deviation and coefficient of variation of the cementitious composites were estimated. It was observed from the test results that the standard deviation and coefficient of variation of the cementitious composites were slightly larger than plain mortar but did not matter much.

As hydrogeologic parameters such as hydraulic conductivity and specific yield are estimated by aquifer test , these are dependent on specific points at which field test was conducted. To overcome these site-specific limitations, a method of estimating transmissivity of aquifer using distribution features for parameters in Water table fluctuation model is newly suggested. Distribution features in reaction factor, specific yield and transmissivity having the function of pore space in aquifer are used to derive empirical equation for estimating transmissivity. From the result for applying the equation for 10 groundwater stations in Northeast Jeju Island, this equation is available for estimating transmissivity compared to the value estimated by existing equations. The estimated transmissivity ranged from 14.2 to 3,716.9 m2/day, and its average was 821.8 m2/day.