This study aims to develop a detailed sizing system for lower body clothing for elderly obese women, using data from the 8th Korean Anthropometric Survey. The research targets 296 elderly women aged 60 to 85, selected from 805 participants in total, who meet the following criteria: Rohrer Index of 1.6 or above, Body Mass Index of 25 or higher, and Waist-Hip Ratio of 0.85 or greater. Elderly women with abdominal obesity exhibit shorter lower body proportions and greater fat accumulation in the torso, around the chest and waist. The findings show that women in their 60s have the highest level of obesity, while waist width and thickness are greatest in women in their 70s, suggesting that abdominal obesity increases with age. According to the KS standards, the main measurement categories were divided into 5cm increments for height, while waist and hip girth were categorized into 5cm and 3cm, respectively, to analyze the distribution of sections. Clothing size standards for lower garments that require a precise fit, such as skirts and formal pants, are presented in 13 sizes, corresponding to a waist girth range of 85–100cm and a hip girth range of 88–97cm. Detailed measurements are categorized into primary and reference areas. Additionally, sizes were presented differently based on whether a precise fit was necessary. For items that did not require a precise fit, ranges were indicated with letters, or ranges were indicated with measurements. Detailed sizes were categorized into primary and reference areas.

The purpose of this study is to produce virtual models of women aged in their 60s and to implement the virtual clothing with jackets. We referred to 3D images of standard and obese body types from the 8th Size Korea and attempted to create avatars based on their images through the various trials. Final virtual models were made to reflect the appearance of women in their 60s. For the standard body type, a 3D image with average body measurements was selected. Based on numerous trials aimed at turning her image into an avatar, the auto-converted avatar on CLO 3D was slimmer than the woman in the original image, and hence it was not suitable for the virtual model. After blending, we converted the image into an uneditable avatar for which only the joint points could be moved, thereby creating an avatar that was identical to the original image. We also selected an image of an obese woman with a “beer bottle” body shape from the 8th Size Korea. We created an avatar that resembled her shape by also converting it into an uneditable avatar for which only joint points could be moved. To use these avatars in virtual clothing, we removed masks of avatars and made faces, hair styles, and skin tones representing women in their 60s. The moderately-sized classic jackets were smooth on both virtual models and fitted satisfactorily. This study demonstrated the applicability of virtual model production of various body types or ages in special clothing studies.

격납건물은 원자력 발전소의 중대 사고 발생시 방사성 물질의 외부 방출을 막는 심층 방어 체계 중 마지막 방벽이다. 중대사고 발생시 격납건물 내부에선 노심 융해와 수소 발생으로 인한 내압 상승과 증기 폭발로 인한 구조적 손상이 일어나며, 이에 대한 구조적 건전성을 평가하기 위해 격납건물에 대 한 극한 내압 성능 평가를 실시한다. 극한 내압 성능 평가 방법 중 확률론적 평가시 현실적인 제약으 로 인해 고신뢰도 유한요소해석 모델을 이용하며 이때에 불확실성 인자들의 확률 분포 특성을 고려한 데이터 셋을 샘플링 기법을 이용하여 구성한 후 비선형 해석을 실시한다. 도출된 비선형 해석 결과는 취약도 곡선을 도출에 사용되며, 취약도 곡선을 이용하여 확률론적인 평가가 실시된다. 샘플링 기법에 따라 적절한 표본 크기가 아닌 데이터셋을 구성하게 되면 통계적 불확실성으로 인한 취약성 분석의 오차가 증대된다. 하지만 유한요소해석시 발생하는 막대한 계산 비용으로 인하여 기존의 방식은 적절 한 샘플링 크기 선정 및 부적절한 샘플링 크기 선정으로 인한 확률론적인 성능평가에 대한 영향에 대 한 정량화 및 평가를 제한적으로 수행하였다. 따라서 본 연구에서는 격납건물의 재료적 특성 및 내압 으로 인한 변위 데이터를 기반으로 생성한 인공신경망 모델을 통해 유한요소 해석에 대한 대리모델을 생성한다. 이후 생성한 대리모델을 기반으로 일반적인 불확실성 분포 샘플링에 사용되는 Monte Carlo method, latin hypercube sampling, Sobol sequence을 이용하여 표본 크기에 따른 격납건물 확률론적 인 극한내압성능 평가에 대한 영향을 정량화 및 평가를 실시하겠다. 이를 통해 제한적으로 탐색되었던 불확실성 공간에 대하여, 그 통계적 불확실성 및 전방위적인 탐색이 가능해 질것으로 기대한다.

가는잎향유[Elsholtzia angustifolia (Loes.) Kitag.]는 화형 이 아름답고, 정유 특유의 향기가 좋아서 분화용 및 지피용 관 상식물로 수요가 증가하고 있고, 전초에는 약효가 있다고 알 려져 있다. 본 연구는 가는잎향유의 육묘에 미치는 플러그 트 레이 셀 사이즈, 파종립수, 차광정도, 추비농도 등의 영향을 구명하기 위하여 수행되었다. 연구결과, 플러그 트레이 셀 사 이즈는 용량이 증가할수록 유묘의 초장, 엽수, 마디수, 근장, 지상부 생체중이 유의적으로 증가하였다. 파종 립수는 2립 파 종 시 가장 효율적이었고, 파종량이 증가할수록 생육이 감소 하였다. 차광정도가 높아질수록 초장은 증가하였고, 경직경, 엽수, 마디수는 55% 차광에서 가장 우수하였다. 추비 처리 시 공시비료 1000배 처리구에서 생육이 가장 양호하였다. 따라 서 가는잎향유의 육묘 시 162셀 트레이에 원예상토를 채운 다음 셀 당 2립 파종한 후 55% 차광막이 설치된 육묘상에서 공시비료 1000배로 엽면시비하는 것이 가장 효과적인 것으로 생각된다.

In this study, a new type of composite material combined with carbonyl iron, a relatively strong ferromagnetic material, was prepared to overcome the current application limitations of Prussian blue, which is effective in removing radioactive cesium. The surface of the prepared composite was analyzed using SEM and XRD, and it was confirmed that nano-sized Prussian Blue was synthesized on the particle surface. In order to evaluate the cesium removal ability, 0.2 g of the composite prepared for raw cesium aquatic solution at a concentration of 5 μg was added and reacted, resulting in a cesium removal rate of 99.5 %. The complex follows Langmuir’s adsorption model and has a maximum adsorption amount (qe) of 79.3 mg/g. The Central Composite Design (CCD) of the Response Surface Method (RSM) was used to derive the optimal application conditions of the prepared composite. The optimal application conditions achieved using Response optimization appeared at a stirring speed of pH 7, 17.6 RPM. The composite manufactured through this research is a material that overcomes the Prussian Blue limit in powder form and is considered to be excellent economically and environmentally when applied to a cesium removal site.

This study aimed to analyze adult men’s body sizes and shapes and suggest size specifications to provide preliminary data to academia and industries. A total of 814 adult men aged 30-44 were selected from the 7th Size Korea data, and 55 direct upper body measurement and calculation items were analyzed using SPSS 25.0. In individual Individual differences, thickness, circumference, and width were high, and height and length were low. Height above the waist base line and shoulder dimension decreased in early 40s age group, while height below the waist base line declined as age increased. In addition, buttocks shape changes were found in early 40s age group. According to factor analysis, ‘upper body and upper-extremity horizontal size’, ‘torso height and upper extremity length’, ‘shoulder dimension’, ‘upper body length’ and ‘shoulder angle’ were derived. Using clustering analysis, four different body types were classified: i) big abdomen with flat chest, ii) slender with big, raised shoulders, iii) dwarfish with small, droopy shoulders, and iv) obese with large shoulders. ‘Slender with big, raised shoulders’ was a typical body shape among men aged 30-44. In older participants, the ‘big abdomen with flat chest’ ratio was low, while ‘obese with large shoulders’ was more common. This study proposed size specifications by body type considering the above characteristics.

This study analyzed product conditions in terms of “size system,” “clothing construction depending on fit,” “details,” “colors,” and “prices,” with an emphasis on young contemporary brands for spring/summer 2021, in order to provide basic data for the development of small-sized women’s jackets. Out of 96 domestic and foreign brands, the study analyzed 254 small-sized jacket products from 23 brands that produce size-XS jackets. First, when examining the sizes for women’s jackets, we found that 8 out of the 23 brands offer a size-XXS option. After conducting tree analysis to analyze the factors affecting the production of size-XXS, the study found significant results in the areas of “distinction between domestic and foreign brands” and “product price.” Second, after categorizing small-sized women’s jackets into 3 categories— fit-slim, basic, and straight—the study analyzed clothing construction elements depending on fit. This seasons mainly feature straight-fit’s hip-line length jacket, a 4-panel pattern, and a panel without a waist dart. Third, the study, through the analysis of the colors of small-sized women’s jackets, found a higher frequency of colors in the order of black (23.0%), white (13.3%), and beige tones (10.1%), with additional colors such as sky blue, rose pink, and aquamarine in production, which exhibit the senses of the seasons. Price analysis revealed that small-sized jackets constituted a price range at the mid-to-low end, as in ₩50,000-100,000 (30.3%), ₩100,000- 150,000 (19.3%), and ₩150,000-200,000 (11.8%).

This paper describes a novel zero-stress member selecting method for sizing optimization of truss structures. When a sizing optimization method with static constraints is implemented, the member stresses are affected sensitively with changing the variables. However, because some truss members are unaffected by specific loading cases, zero-stress states are experienced by the elements. The zero-stress members could affect the computational cost and time of sizing optimization processes. Feature selection approaches can be then used to eliminate the zero-stress member from the whole variables prior to the process of optimization. Several numerical truss examples are tested using the proposed methods.

목적 : 사이즈렌즈를 이용한 유발부등상시가 대비시력과 원·근거리 입체시, 눈과 손의 협응성에 미치는 영향 을 파악하고자한다. 방법 : 20~30대 일반인 30명을 대상으로 사이즈렌즈의 2, 4, 6%의 배율에 따른 고대비 및 저대비시력, 원거 리 입체시력, 근거리 입체시력을 측정하였다. 대비시력은 란돌트환으로 구성되어 있고 LogMAR 시력을 사용하여 측정하였으며, 시표의 대비에 따라 고대비(100%) 및 저대비(25, 10%) 시력으로 나누었다. 원거리 입체시는 세막 대 검사를 이용하였으며, 근거리 입체시는 Random dot test를 이용하여 측정하였다. 눈과 손의 협응성은 t-wall 을 모티브로 제작한 기기를 이용하였다. 결과 : 대비시력은 2% 부등상시 유발 후 유의한 차이는 나타나지 않았으나, 4, 6%의 부등상시 유발 시 유의한 차이를 보이며 감소하였다(p<0.050). 대비시력은 부등상시도가 증가할수록, 대비도가 저하될수록 감소폭이 크게 나타났다. 원·근거리 입체시는 2%의 부등상시를 제외한 4, 6%의 부등상시 유발 시 유의한 차이를 보이며 감소 하였다(p<0.050). 눈과 손의 협응성은 부등상시도가 증가함에 따라 유의한 감소를 보였다(p<0.050). 결론 : 부등상시가 증가함에 따라 대비시력, 입체시 그리고 눈과 손의 협응성이 감소하는 것을 알 수 있었다. 임상에서 안경사가 부등시를 처방할 때 부등상시를 고려해야 한다. 그러나 미관을 고려하여 처방이 기피되는 경우 배율의 차이를 최소 2% 이내로 유도해야한다. 이를 통해 부등상시에 의해 생길 수 있는 일상 시 생활의 저하 요인 을 예방하여 시 생활의 건강과 삶의 질 향상에 보탬이 될 것으로 기대한다.

This study utilized data to classify and characterize the body types of plus-size adult men aged in their 30s and 40s. Diversity is an important factor in the era of inclusive design, and discussion about size diversity to include the plus size should be accommodated. Data from 493 adult men classified as obese (with a World Health Organization criterion ≥25 BMI) were used for the analysis. The results of the study are as follows. Six independent factors were extracted using factor analysis for cluster analysis, which were then classified into five types. Type 1 (29.01%) was identified as body type I with the smallest degree of obesity. Type 2 (15.4%) was identified as body type Y with wide shoulders and a thin waist. Type 3 (14.2%) was the largest body volume (body type O), while the fourth (19.27%) identified as body type H has a large height and upper body. Lastly, type 5 (22.11%) has a long lower body and a slim abdomen, referred to as body type X. This study presents a basis for the development of various clothing sizes utilizing the body shape characteristics of plus-size men in their 30s and 40s. Follow-up research is needed to develop patterns for plus size men and to design various products.

This study presents an efficient clothes-sizing system for those experiencing obesity in old age with the aim of revitalizing the clothing industry for older obese people. The study targets 249 obese men aged 60 to 85 who satisfy a Rohrer index score of 1.6 or higher and a BMI (body mass index) of 25 or higher. Elderly obese males showed more obesity in the body based on the waist. In particular, those in their 60s were the most obese, and after reaching their 70s, characteristics of old age in which the stature was reduced and the limbs were tapered were shown. The clothes-sizing system was set to 5cm in stature, 5cm and 3cm in chest girth, 2cm in waist girth (omphalion), and 2cm in hip girth according to the KS standards. Through the two-way distribution of each section, the name of the section with a high distribution was given. Casual tops were selected from eight sizes, ranging from 155 to 170cm in stature and 95 to 105cm in chest girth. Suit top sizes were selected from eight sizes, ranging from 160 to 170cm in stature and 94 to 103cm in chest girth. Bottoms suggested 10 sizes distributed between 90 and 100cm in waist girth (omphalion) and 92 and 98cm in hip girth. According to the KS standards, the detailed size was divided into the basic part and the reference part.

Oversized fashion is again in the spotlight due to the influence of retro fashion. This has created new fashion trends with methods different from those of the past. This analysis examines recent trends by sorting these looks according to new and different methods of judging their appearance. A new categorization of the oversized look and its configurations has been created, one which separates “big” looks, partial changes, and layered looks. This research was based on historical review and previous studies. Three thousand one hundred thirty-six photos of oversized looks that have appeared in collections over the past five years were gathered, and their appearance was categorized according to type. The categorization results showed that big looks (55.1%) were most prevalent, followed by partial alterations (36.35%), and layered looks (8.45%). In comparison to prior oversized clothing production, new permutations of the “Big” look expanded the silhouettes of torso, shoulders, neckline and collar. Partial changes have expanded from the broadened shoulders of the 1980s. Today these styles expand the shoulders and armholes vertically or horizontally, which dramatically exaggerates the sleeves and collar. The layered look no longer simply features overlapping layers but takes the form of over-layering through cuts and insertions. Through such analysis it is clear that modern oversized looks break away from the simple expanded forms and production methods of the past. They now attempt to realize an exaggerated beauty of form regarding each clothing component and also maximize decorative effects through innovative drafting or sewing methods.

Over the past few years, companies have started moving into specific niches in plus-size fashion. The purpose of this study was to verify the marketability of young plus-size clothes in the USA. Data were collected from female consumers aged from 20 to 39 who have experience of purchasing plus-size items. A total of 282 responses were used for statistical analysis. The research result is as follows. First, the obesity stress is affected more by the subjective obesity level than by the objective obesity level and by how people recognize their body types. Second, from an analysis of the factors affecting the shopping orientation of plus-size consumers, style consciousness, pursuing reasonable, emphasizing comfort, and body consciousness are found to be important factors. Third, even if responders are aware of their exact body size, they actively look for the correct size. Fourth, fit evaluation of plus-size products is based on the factors of size fit and movement fit. The respondents were unsatisfied with chest and arm measurements, which deviate widely by body type for tops. Fifth, the overall dissatisfaction with the plus-size market is attributed to the fact that the product assortment range from which to select styles is narrow, and trend reflection is low. Sixth, the respondents tended to avoid fabrics that make their body type more obvious, textures that give the impression of a larger body size, or stiff textures. These results show that the psychological and physical characteristics of obese consumers should be considered to develop products for the young plus-size market.

목적: 기존의 전안부에 떨어뜨리는 topical agents 방식은 후안부의 망막 신생혈관 질환에 대해 효과적인 치료제 전달 방식이 될 수 없다. 우리는 Alginate를 사용하여 생분해성을 가지고, 보다 적은 횟수의 주입술과 철 나노입자로인해 선택적으로 약물을 방출 할 수 있어, 직접적이고 효과적인 망막변성 질환을 치료할 수 있는 Ferrogel 이식체(Fe3O4-RGD – Alginate)를 고안하였다. Alginate는 그 자체의 특성 때문에 gel 형성시 자연적으로 nano size기공이 형성된다. 우리는 손상이 적고 형태를 유지하며 건조 할 수 있는 CO2 초임계 건조 장치(Critical Point Dryer)를 사용하여 기존의 얼음의 결정을 이용한 macro-porous ferrogel의 기공사이즈를 nano scale로 조절하였다. 이에 따라 Ferrogel의 세포부착성과 약물 로딩/방출에 관련된 기공 크기의 조절, 유사 환경을 조성하기 위한 인공 유리체 합성과 dish를 제작하여 약물방출에 관한 in vitro 실험 모델을 연구하였다. 방법: Sodium alginate와 세포부착 RGD- peptide를 합성하기 위해, Alginate 0.1 g에 MES buffer 5 ml,EDC 5 mg, sulfo-NHS 2.8 mg, RGD-peptide 100μg를 균질하게 섞고, 동결건조 시켰다. Ferrogel을 제작하기 위해 MES buffer(pH 6)에 RGD-peptide가 결합된 Sodium Alginate(SA-R) 1wt%와 가교 결합제인 Adipic acid dihydrazide 5mM, Fe3o4 nano –particle 13wt%, HOBt hydrate, EDC를 균질하게 섞어주었다. 그 후, 즉시 틀에 넣고 2시간 동안 굳혀준다. 굳혀진 Gel의 잔류시약을 제거하기 위해 대용량의 삼차증류수에 2일 동안 넣어 두었다. 그런 다음, macro–porous의 기공을 만들기 위해 –20℃에 얼린 후, 동결건조 시켰고, nano- porous의 기공을 만들기 위해, 잔류시약 제거 후, 초임계 건조 장치를 이용해 말렸다. 인공유리체를 만들기 위해 PBS, Hyaluronic acid(HA 1wt%), triethylamin, glycidyl methacrylate, tetrabutylammonium bromide를 순차적으로 섞고 , 광 개시제 Irgacure 2959와 N-vinyl-pyrrolidinone을 넣어 고안한 몰드에 UV light( 250~450nm)를 30분 동안 노출시키고 PBS로 2일 동안 투석 시켰다. Alginate의 RGD부착 유무를 Ninhydrin assay와 H-NMR로 확인하고, gel 상태에서 counting방법으로 세포부착 성을 평가하였다. Ferrogel의 기공성 평가를 위해 주사전자현미경 (SEM)을 사용하였고, 인공유리체의 합성을 H-NMR과 육안으로 평가하였다. 결과: SA-R의 Ninhydrin assay에서 RGD-peptide 양이 10ug, 100ug 중에 100ug일 때 흡 광도가 더 높게 나타났고, H-NMR에서 SA에 부착된 NH2-resonance(6.8~7.2ppm picks) 를 확인 할 수 있었다. SA-R의 세포부착성에서 SA보다 약 11배 더 부착이 된 것을 확인 할 수 있었다. 또한 macro–기공의 평균 장축 사이즈는 510㎛, nano-기공의 평균장축 사이즈는 97nm로 나타났다. H-NMR에서 인공유리체의 Hyaluronic acid에 Vinyl group의 접합 (picks :5.7, 6.2 ppm)을 확인 할 수 있었고, uv 합성 후, gel 형태를 유지함을 관찰 할 수 있었다. 결론: 세포부착성을 높이기 위해 SA-R의 RGD-peptide의 양이 100ug이 보다 적합하다 고려된다. 또한 nano–porous한 ferrogel을 만들기 위한 방법으로 초임계 건조 방법이 적합한 것으로 생각된다. 약물 로딩된 ferroegl의 in vitro 약물실험 모델로써 인공유리체의 합성과 특정 몰드에 대한 적합한 성형성을 확인 할 수 있었다. 앞서 인공유리체의 MTT실험을 거쳐, 세포를 seeding하여, 세포부착성을 가지는 ferrogel을 부착시킨 후, 자기장에 따른 약물 방출을 실험이 가능할 것으로 사료된다.

The purpose of this study is to propose a specialized clothes-sizing system for elderly (aged 60~79) obese women satisfying the following conditions based on the data from the fifth Korean Agency for Technology and Standards (2004): a Rohrer's index of over 1.6, a BMI of over 25, and a WHR of over 0.85. The lower bodies of elderly obese women tends to be shorter and wider than average. Particularly, their torsos from the chest to the waist tend to be more obese than other areas. According to the KS standards, the clothes-sizing system sets up its size intervals as follows: 5cm in stature, 5cm and 3cm in bust, 3cm in waist, and 3cm in hip. Based on the dualistic distribution of each section, the names of the sections indicating high distribution are suggested. For suit tops, 11 sizes are selected as distributed in the 145-155cm stature section and 91-103cm bust section. For casual tops, nine sizes are selected as distributed in the 145-155cm stature section and 90-105cm bust section. For bottoms, 11 sizes are selected as distributed in the 82-97cm waist section and 91-97cm hip section. According to the KS standards, detailed sizes are suggested in the division of basic and reference areas.

The purpose of this study was to define Korean adolescent girls' brassiere size demand features in order to improve the suitability of junior brassieres for adolescent girls. The subjects for the data collection were Korean teenage girls from age 13 to 17 (n=492). Their body size was collected by conducting anthropometric measurement. The results of this study show that not only the growth of height, but also the growth of the body length is almost finished at the age of 15. The brassiere cup size, which shows the breast growth directly, increased remarkably at age 13 to 14, and once again at age 17. The demand for brassiere band size 70 appeared generally high among all ages. The research also suggests that the band size 60 and over 85 is also needed among the teenage girls. In matters of the brassiere cup size, junior brassieres over B-cup size are also necessary for teenage girls with big breasts to support their heavy breast weight. These results imply that the junior brassiere companies should improve their brassiere size range to fit the teenage girls' breasts properly.