본 연구에서는 공리적 설계 방법론에서 중요한 2가지 공리 중 독립공리를 시스템 개발에서 설계 기준으로 적용하였다. 기능 요구사항과 대응하는 설계 파라메터는 설계행렬을 구성하고 이를 이용하여 독립공리에 부합하는 설계 파라메터의 순서를 정한 후 블록 레벨링 시스템에서의 독립적 구성요소를 판별하였다. 이러한 공리적 설계의 결과로서 설계 순서에 맞는 블록 레벨링 시스템 구성을 도출하였다. 도출된 블록 레벨링 시스템 구성의 검증과 확인을 위해 블록 조립 현장에서 사용하고 있는 3차원 좌표 측정기인 토털 스테이션을 사용하여 실제 조립이 완료된 블록에 대하여 구현된 블록 레벨링 시스템을 적용하여 데이터를 비교하는 시험을 수행하였다. 토털 스테이션의 측정 데이터와 블록 레벨링 시스템의 수신 데이터를 비교하여 1 mm 이내의 정밀도로 블록 레벨링 시스템이 동작함을 검증하고 확인하였다.

The object of this study is to get the superior double hull structure to its crashworthiness against collision comparing absorbed energy capacities of its various types with each other, varying material properties, collision positions and velocities, and structural arrangements such as double hull width, web and stringer spaces, etc. Local absorbed energy capacities, failure behaviors and damage extents of their members are also considered during collision in addition to the estimations of their global ones. This paper describes a series of numerical simulations of collisions between DWT 45,000 oil tanker(struck ship) and DWT 10,500 rigid one(striking ships) using Hydrocode LS/DYNA3D. Collisions are assumed to occur at the middle of struck ship with striking one moving at right angle to its centerline. The following remarks were obtained through this study: More flexible the double hull structure is, much superior its crashworthiness against collision is. The increment of double hull width does not give much influence than other factors do. The exact use of material property such as failure strain is also important on the numerical simulation of collision.

The study presents the optimum design of B/C midship structure based on the classification society's Rule. The SUMT (Sequential Unconstrained Minimization Technique), using the Direct Search Methods (Hooke and Jeeves, Simplex) is applied to the solution of this nonlinear optimum design problem with constraints. Through the optimum designs of existing ships(60k, 186k, 220k), the amount 0.45-6.18% in weight of their midship structures are obtained on the viewpoint of minimum weight design.

In spite of the widespread use of stiffend plates in ship structures, it is very difficult to analysis these directly. So, in conventional analysis of plate structures, above structures are used to be idealized as orthotropic plate or grillage structures. Lately, the development of large computers, it is able to apply the optimum techniques to structural design. In this paper, the double bottom structure of Bulk Carrier was idealized into flat grillage which is composed of intersecting beam stiffencers primarily loaded mormal to its surface. And strength analysis was carried out by using the finite element method based on displacement. And further, according to variation of floor space and double tobbon heightm, the optimum design was carrid out by using Hooke and Jeeves direct search method.