PURPOSES : This study aims to identify the thresholds at which various factors affecting traffic crashes lead to actual traffic crashes METHODS : To verify the thresholds, we created scenarios and ran simulations with a combination of factors that affect traffic crashes. Lateral offset and minimum TTC were used to evaluate whether an incident occurred. RESULTS : In the first scenario, the most significant factor affecting traffic crashes is curvature, and it was found that the smaller the curvature(200 meters or less), the greater the deviation from the lane. And in the second scenario, especially the passenger car scenario, no accidents occurred when the curvature was greater than 90 meters and the speed was 40 km/h or less. The smaller the curvature and the higher the speed, the more accidents occurred. Similarly, in the bus scenario, no accidents occurred when the curvature was 120 meters or more and the speed was 30 km/h or less. Also, accidents tended to occur when the curvature was smaller and the speed was higher. CONCLUSIONS : Through this study, we derived the thresholds of factors that influence traffic crashes. The results are expected to help design and operate roads in the future and contribute to reducing traffic crashes.

PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.

PURPOSES : The purpose of this study is to provide basic data to improve the service life of asphalt pavement using basalt aggregate in Jeju Island by evaluating the performance of asphalt pavement through analysis of material and structural aspects. METHODS : To evaluate the performance of Jeju Island's asphalt pavement, cracks, permanent deformation, and longitudinal roughness were analyzed for the Aejo-ro road, which has high traffic and frequent premature damage. Cores were collected from Aejo-ro sections in good condition and damaged condition, and the physical properties of each layer were compared and analyzed. In addition, plate cores were collected from two sections with severe damage and the cause of pavement damage was analyzed in detail. RESULTS : About 45% of the collected cores suffered damage such as layer separation and damage to the lower layer. The asphalt content of surface layer in the damaged section was found to be 1.1% lower on average than that in the good condition section, and the mix gradations generally satisfied the standards. The density difference between the cores of each layer was found to be quite large, and the air voids was found to be at a high level. CONCLUSIONS : Test results on the cores showed that, considering the high absorption ratio of basalt aggregate, the asphalt content was generally low, and the high air voids of the pavement was believed to have had a significant impact on damage. High air voids in asphalt pavement can be caused by poor mixture itself, poor construction management, or a combination of the two factors. Additionally, the separation of each layer is believed to be the cause of premature failure of asphalt pavement.

PURPOSES : Derive a road pavement design method using Geocells, aim to derive a road pavement design and construction method suitable for the characteristics of the Bangladesh region METHODS : To assess long-term performance during road construction in Southeast Asia using Geocells, field tests and numerical analysis are conducted to verify stability. RESULTS : A total of 12 displacement measurements were conducted during the field tests, confirming an average load of 15.75 kN and an average displacement of 0.542mm. Inverse analysis was performed to obtain the properties of Geocell combined with compacted soil. The numerical analysis results confirmed that the insertion of Geocell provides better stability compared to the case with only compacted soil. CONCLUSIONS : Based on field tests and numerical analysis, a road design plan suitable for the Southeast Asian environment was proposed. A preliminary test section was selected in the Comilla region of Bangladesh, and test construction has been completed. Subsequent evaluations of the structural performance by soil layer in the test construction area will be conducted to develop a Geocell road pavement method, taking into consideration the characteristics of the Bangladesh region.

algorithms for deriving and analyzing retroreflectivity influence factors through regression analysis. METHODS : An experimental road lane was created to examine the trends of retroreflectivity and LiDAR intensity values, and a controlled indoor experiment was conducted to identify influencing factors. The optimal algorithm was developed by regression analysis of the experimental data. RESULTS : The significance probability (P-value) through SPSS linear regression analysis was 0.000 for measured height, 0.001 for perpendicular angle, 0.157 for vertical angle, and 0.000 for LiDAR intensity, indicating that measured height, vertical angle, and LiDAR intensity are significant factors because the significance probability is less than 0.05, and vertical angle is not significant. The NNR regression model performed the best, so the measurement data with height (1.2m, 2m, 2.2m) and vertical angle (11.3°, 12.3°, 13.5°) were analyzed to derive the optimal LiDAR Intensity measurement height and vertical angle. CONCLUSIONS : For each LiDAR measurement height and vertical angle, the highest correlation between LiDAR Intensity and retroreflectivity was found at a measurement height of 1.2 meters and a vertical angle of 12.3°, where the model learning accuracy (R2) was the highest.

PURPOSES : This study is aimed to economic analysis of the ferronickel slag pavement method carried out to suggest the necessity of developing ferronickel slag pavement technology. METHODS : A life cycle cost analysis of the application of the Ferronickel Slag pavement method and the cutting + overlay pavement method was performed to compare the economic indicators and greenhouse gas emissions for each pavement method. RESULTS : As a result of the analysis, regardless of the Ferronickel Slag mixing rate, if the common performance of the Ferronickel Slag pavement method is the same or superior to the existing pavement method, it is more economical than the existing pavement method. Furthermore, the lower the maintenance cost of the Ferronickel Slag pavement method, the higher the economic feasibility due to the high Ferronickel Slag mixing rate. Greenhouse gas emissions can be reduced from at least 9% to up to 53% through the application of the Ferronickel Slag pavement method, except for some scenario analysis results. CONCLUSIONS : This study provided that the Ferronickel Slag pavement method was superior to the existing pavement method in terms of economic and environmental aspects. Therefore, it was found that the objective justification of developing road pavement technology using Ferronickel Slag was secured.

PURPOSES : Construction cost estimates are important information for business feasibility analysis in the planning stage of road construction projects. The quality of current construction cost estimates are highly dependent on the expert's personal experience and skills to estimate the arithmetic average construction cost based on past cases, which makes construction cost estimates subjective and unreliable. An objective approach in construction cost estimation shall be developed with the use of machine learning. In this study, past cases of road projects were analyzed and a machine learning model was developed to produce a more accurate and time-efficient construction cost estimate in teh planning stage. METHODS : After conducting case analysis of 100 road construction, a database was constructed including the road construction's details, drawings, and completion reports. To improve the construction cost estimation, Mallow's Cp. BIC, Adjusted R methodology was applied to find the optimal variables. Consequently, a plannigs-stage road construction cost estimation model was developed by applying multiple regression analysis, regression tree, case-based inference model, and artificial neural network (ANN, DNN). RESULTS : The construction cost estimation model showed excellent prediction performance despite an insufficient amount of learning data. Ten cases were randomly selected from the data base and each developed machine learning model was applied to the selected cases to calculate for the error rate, which should be less than 30% to be considered as acceptable according to American Estimating Association. As a result of the analysis, the error rates of all developed machine learning models were found to be acceptable with values rangine from 17.3% to 26.0%. Among the developed models, the ANN model yielded the least error rate. CONCLUSIONS : The results of this study can help raise awareness of the importance of building a systematic database in the construction industry, which is disadvantageous in machine learning and artificial intelligence development. In addition, it is believed that it can provide basic data for research to determine the feasibility of construction projects that require a large budget, such as road projects.

The public safety management guidelines were introduced in 2019 and continue to be dedicated to advancing comprehensive measures for public safety management, with a primary focus on prioritizing the safety and well-being of the public within governmental institutions. To achieve this goal, our previous study developed a establishment procedure of risk assessment-based safety inspection system for public institutions that order construction projects and applied it to highway construction projects to evaluate its effectiveness. To enhance the practicality of the establishment procedure, it is essential to collect and analyze feedback from stakeholders regarding its performance and suitability. This study conducted a survey involving 200 participants who had experience with the establishment procedure, and performed statistical analyses to evaluate its performance and applicability. The survey results indicated that the participants reported a high level of satisfaction (scoring 4 and above on a 5-point Likert scale) in several areas: specialization of safety inspection items for different types of work (with a satisfaction rate of 65%), the evaluation process for safety ratings (64.5%), and their willingness to recommend the procedure to other institutions (75.5%). In the factor analysis with Varimax rotation, two factors emerged: (1) a specialization factor related to safety inspection items, and (2) a grading factor associated with safety evaluation results. Regression analyses of these factors unveiled significant positive relationships with improvements in safety and health performance, including the prevention of fatal accidents, heightened safety responsibility, and raised safety inspection standards. The establishment procedure of safety inspection system developed in our previous study can play a crucial role in reducing accidents resulting in fatalities and injuries at construction sites, ultimately contributing to a safer working environment for all involved parties.

PURPOSES : This study intended to derive a methodology that can evaluate water splash caused by distress on the road surface based on experimental methods and to present quantitatively by analyzing the impact on road users. METHODS : Through literature review, the current problems of road pavement and drainage facility standards, the factors of road splash caused by puddle was selected to measure damage. Field measurements were conducted by setting different conditions for each factors and setting different conditions based on the hypothesis. In addition, water splash by surface distress type and puddle was measured to analyze using statistical techniques from correlation to multi-regression. RESULTS : The maximum and effective distance due to road splash increases as the driving speed, regardless of vehicle load and tyre type. Splash was measured according to the type of road distress to analyze the correlation between the influencing factors, and there was a weak correlation between the width and length of the puddle, depth and the effective distance. In addition, the interaction analysis showed that there was an interaction between the width of the water hole and the depth of puddle. Moreover, based on the multi-regression analysis, it was not statistical significant. This is judged to that the number of data samples used for this analysis is limited because the diversity of puddle conditions cannot be set differently for each type of distress. CONCLUSIONS : Since the distress of depending on the size, depth and shape of the road surface, it is necessary to calculate it and present maintenance standards, so this results present an experimental methodology that can intuitively evaluate damage cased by unestablished puddle. From this results, this is expected to be used as a quantitative indicator to evaluate the satisfaction of road users as a functional performance according to road surface condition.

The asphalt concrete industry, accounting for >90% of road pavement, is a crucial contributor to construction waste. This study focuses on the recycling of asphalt concrete recycled aggregates, which currently exhibits a low rate. We investigated the application of these aggregates, combined with hardener and mixing water, in the development of ecofriendly road base materials using circular aggregates. Results revealed that the 13-mm asphalt concrete recycled aggregates met all quality standards. However, the 25-mm aggregates did not conform to the reclaimed asphalt content standard; however, they met other quality standards. Moreover, the experimental results for the hardener and mixing water indicated compliance with all quality standards.

PURPOSES : LED based Variable Message Signs(VMS) have been widely used to inform safety messages to the drivers in advance. Legibility Distance of VMS is the most important factor to provide the safety messages to drivers in timely and effective way. However, current National Standards on legibility distance design considers letter size only even there is a difficulty to read the signs at adverse weather conditions such as heavy fog. So, this study examined the legibility issue under fog by evaluating the legibility distance with two design factors such as letter size and luminance. METHODS : Two foggy weather conditions, intermediate and heavy fog, were simulated at real-road-scale Proving Ground. Legibility distance at daytime and nighttime was evaluated by test subjects. Subjects were asked to fill the legible distance on the test sheet and statistical significant was analysed at the lab. RESULTS : The legibility distance(LD) under fog was observed only 22 to 41% of LD observed under normal weather condition at daytime, and 26 to 45% at nighttime condition. Study results showed a consistent increase in LD with higher luminance even at same letter size and vice versa conditions, However, statically significant difference between groups was only revealed when both letter size and luminance level increased conditions. In order to apply the test results in terms of engineering benefits, LD results from significantly different groups was evaluated with relative to Stopping Sight Distance(SSD) within conceptual frame suggested in this study. CONCLUSIONS : From the study results, current National Standard on legibility distance design needs to consider letter size and luminance simultaneously to response the legibility issue in adverse weather conditions.