In this study, we analyzed the changes in concentrations of volatile fatty acids (VFA), phenols, and indoles, as well as odor contribution in pig slurry. The pig slurry was stored for approximately two months after the manure excretion of pigs which had been fed 3% level of peat moss additive. The investigation was carried out through lab-scale experiments simulating slurry pit conditions within pig house. Throughout the storage period, the concentration of VFA exhibited a tendency to be 11%-32% higher in the pig manure treated with peat moss as compared to the control group. From a concentration perspective, phenol and acetic acid accounted for the majority of the total odor compounds produced during the pig slurry storage period. However, their significance diminished when the concentration of odoros compounds are converted into odor activity value and odor contribution. Despite the odor reduction effect of the ammonia (NH3) adsorption by peat moss, if it cannot effectively reduce the high odor-contributing compounds such as indoles and p-cresol, the sole use of peat moss may not be considered an effective means of mitigating odors produced by pig slurry. According to this study, indoles, p-cresol, skatole, and valeric acid were consistently revealed as major odor-contributing substances during the two-month storage of pig slurry. Therefore, a comprehensive odor mitigation methodology should be proposed, taking into consideration the odor generation characteristics (including temporal concentration and odor contribution) of pig slurry-derived odors during storage.

ZnO particles are successfully synthesized at 150 oC for 30 min using zinc acetate as the Zn source and 1,4- butanediol as solvent using a relatively facile and convenient glycol process. The effect of ammonium hydroxide amounts on the growth behavior and the morphological evolution of ZnO particles are investigated. The prepared ZnO nanoparticle with hexagonal structure exhibits a quasi-spherical shape with an average crystallite size of approximately 30 nm. It is also demonstrated that the morphology of ZnO particles can be controlled by 1,4-butanediol with an additive of ammonium hydroxide. The morphologies of ZnO particles are changed sequentially from a quasi-spherical shape to a rod-like shape and a hexagonal rod shape with a truncated pyramidal tip, exhibiting preferential growth along the [001] direction with increasing ammonium hydroxide amounts. It is demonstrated that much higher OH− amounts can produce a nano-tip shape grown along the [001] direction at the corners and center of the (001) top polar plane, and a flat hexagonal symmetry shape of the bottom polar plane on ZnO hexagonal prisms. The results indicate that the presence of NH4+ and OH− ions in the solution greatly affects the growth behaviors of ZnO particles. A sharp near-band-edge (NBE) emission peak centered at 383 nm in the UV region and a weak broad peak in the visible region between 450 nm and 700 nm are shown in the PL spectra of the ZnO synthesized using the glycol process, regardless of adding ammonium hydroxide. Although the broad peak of the deep-level-emission (DLE) increases with the addition of ammonium hydroxide, it is suggested that the prominent NBE emission peaks indicate that ZnO nanoparticles with good crystallization are obtained under these conditions.

The conversion of all carbon preforms to dense SiC by liquid infiltration can become a low-cost and reliable method to form SiC-Si composites of complex shape and high density. Reactive sintered silicon carbide (RBSC) is prepared by covering Si powder on top of 0.5-5.0 wt% Y2O3-added carbon preforms at 1,450 and 1,500°C for 2 hours; samples are analyzed to determine densification. Reactive sintering from the Y2O3-free carbon preform causes Si to be pushed to one side and cracking defects occur. However, when prepared from the Y2O3-added carbon preform, an SiC-Si composite in which Si is homogeneously distributed in the SiC matrix without cracking can be produced. Using the Si + C = SiC reaction, 3C and 6H of SiC, crystalline Si, and Y2O3 phases are detected by XRD analysis without the appearance of graphite. As the content of Y2O3 in the carbon preform increases, the prepared RBSC accelerates the SiC conversion reaction, increasing the density and decreasing the pores, resulting in densification. The dense RBSC obtained by reaction sintering at 1,500 oC for 2 hours from a carbon preform with 2.0 wt% Y2O3 added has 0.20% apparent porosity and 96.9% relative density.

SiAlON ceramics are used as ceramic cutting tools for heat-resistant super alloys (HRSAs) due to their excellent fracture toughness and thermal properties. They are manufactured from nitride and oxide raw materials. Mixtures of nitrides and oxides are densified via liquid phase sintering by using gas pressure sintering. Rare earth oxides, when used as sintering additives, affect the color and mechanical properties of SiAlON. Moreover, these sintering additives influence the cutting performance. In this study, we have prepared Ybm/3Si12-(m+n)Alm+nOnN16-n (m = 0.5; n = 0.5, 1.0) ceramics and manufactured SiAlON ceramics, which resulted in different colors. In addition, the characteristics of the sintered SiAlON ceramics such as fracture toughness and microstructure have been investigated and results of the cutting test have been analyzed.

This study was conducted to evaluate the efficacy of mulberry leaf mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry leaves to oak fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 5%, 10% and 20% of mulberry leaves, the cumulative proportion of larvae over 2.5g was 93.1% at 65 days, 95.6% at 55 days, and 93.9% at 55 days after rearing at 25±1℃, respectively. Also, heavy metals were not detected in larvae of P. brevitarsis fed on mulberry leaves.

In this study, the effect of the content of MgO-CaO-Al2O3-SiO2 (MCAS) glass additives on the properties of AlN ceramics is investigated. Dilatometric analysis and isothermal sintering for AlN compacts with MCAS contents varying between 5 and 20 wt% are carried out at temperatures ranging up to 1600℃. The results showed that the shrinkage of the AlN specimens increases with increasing MCAS content, and that full densification can be obtained irrespective of the MCAS content. Moreover, properties of the AlN-MCAS specimens such as microhardness, thermal conductivity, dielectric constant, and dielectric loss are analyzed. Microhardness and thermal conductivity decrease with increasing MCAS content. An acceptable candidate for AlN application is obtained: an AlN-MCAS composite with a thermal conductivity over 70 W/m·K and a dielectric loss tangent (tan δ) below 0.6 × 10−3, with up to 10 wt% MCAS content.

Al/expanded graphite was successfully synthesized through a facile method including ultrasonic and heat treatment. In the well-designed three dimensional structure, expanded graphite(EG) works as a conductive matrix to support coated Al particles. The effects of the fabrication parameters on the microstructures and thermal conductivities of these composites were investigated. As a result, it was found that composites with graphite volume fraction of 17.4-69.4% sintered at 600 oC/45 MPa exhibit in-plane thermal conductivities of 380-940 W/mK, over 90 % of the predictions by rule of mixture. According to the non-destructive analysis results, the synergistic enhancement was caused by the formation of efficient thermally conductive pathways due to the hybrid of the differently sized EG. The structure integrates the advantages of expanded graphite as a conductive support, preserving the electrode activity and integrity and improving the electrochemical performance.

Recently, additive-free sweet potato has been commercialized as a healthier snack food. However, these products are producing by semi-dried form to extend shelf-life, hence the products also possesses hard texture during chewing. To produce crispy sweet potato snack, this study was attempted to dry the semi-dried sweet potato instantly by a hot-press (HP) process. Mashed sweet potato was reformed and semi-dried at 65°C for varying time to provide various final moisture contents. The semi-dried samples were subjected to HP at the process temperature of 175-180°C for 2 seconds. As quality parameters, moisture content, brix, color, texture and sensorial test of the products were evaluated. Based on the results, optimal quality of the product was obtained by the semi-dried sample with 15~18% moisture at which the products exhibited good crispiness with bright yellow color. When the moisture content of the sample before HP was lower than 15%, the final products were normally broken during the HP process. In addition, extreme browning appearance was generated in this condition. Conversely, the sample with more than 18% of moisture was not completely dried by HP and the final product did not possess the crispy texture, although this product showed bright yellow appearance. Consequently, this study demonstrated the potential application of HP in sweet potato processing and the best condition was greatly affected by moisture content of sample prior to HP process.

In this study, we intensively investigated the effect of conductive additive amount on electrochemical performance of organic supercapacitors. For this purpose, we assembled coin-type organic supercapacitor cells with a variation of conductive additive(carbon black) amount; carbon aerogel and polyvinylidene fluoride were employed as active material and binder, respectively. Carbon aerogel, which is a highly mesoporous and ultralight material, was prepared via pyrolysis of resorcinolformaldehyde gels synthesized from polycondensation of two starting materials using sodium carbonate as the base catalyst. Successful formation of carbon aerogel was well confirmed by Fourier-transform infrared spectroscopy and N2 adsorptiondesorption analysis. Electrochemical performances of the assembled organic supercapacitor cells were evaluated by cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy measurements. Amount of conductive additive was found to strongly affect the charge transfer resistance of the supercapacitor electrodes, leading to a different optimal amount of conductive additive in organic supercapacitor electrodes depending on the applied charge-discharge rate. A high-rate charge-discharge process required a relatively high amount of conductive additive. Through this work, we came to conclude that determining the optimal amount of conductive additive in developing an efficient organic supercapacitor should include a significant consideration of supercapacitor end use, especially the rate employed for the charge-discharge process.

스크린 인쇄 방식을 통해 ZnS기반의 AC 분산형 EL 소자를 제작하였다. 유전체층 재료로 BaTiO3를 사용하였다. 소자의 경우는 쉽게 변수를 조정할 수 있는 수동 스크린 인쇄 방식을 사용하여 최적의 조건으로 제작하였다. TiO2는 내산성, 내알칼리성이 좋아 인체에 무해하기 때문에 광촉매제로 많이사용되고 있다. 기판은 투명전극인 ITO glass와 유연한 ITO PET film의 두가지 방식으로 제작하였다. 본연구에서는 형광체층에 TiO2의 첨가량을 변화시킨 EL소자를 SEM과 XRD를 통하여 구조를 분석하고, 발광 스펙트럼을 통하여 분석하였다. 그리고 TiO2의 첨가량이 증가할수록, 발광효율이 증가하는 것을 알 수 있었다.

Purpose : UV-block effect of soft contact lens polymerized and with 2,4-dihydroxybenzophenone in the basic hydrogel contact lens material was evaluated. and also the influence of sterilization condition on change of optical properties was analyzed. Methods: 2,4-dihydroxybenzophenone as additive with 2-hydroxyethyl methacrylate and the initiator AIBN were used for thermal copolymerization. The mixture was heated at 100 ℃ for 50 mins to produce the hydrogel contact lens. and they are heated at 115 ℃ for 3 hour for sterilization. Results: The optical properties of produced contact lens including 2,4-dihydroxybenzophenone showed that the UV-A transmittance was 28~36% and the UV-B transmittance was 10~18%. and Also, in case of sterilization situation, the results showed that the UV-A transmittance was 5~17% and the UV-B transmittance was 4~16%, respectively. Conclusions: After sterilization of produced contact lens, UV-block effect of soft contact lens including benzophenone group was increased.

Intrigued by the recent emergence and success of low-cost airlines, which use the additive option price framing (as opposed to the subtractive option price framing used by the traditional full-service airlines), we attempted to develop and empirically test a theoretical model that can help better understand the success of this innovative pricing practice for optional services. Drawing on the prospect theory and the loss aversion and endowment effect theory, we argue that option price framing affect customer responses such as perceived risk, perceived price fairness and affect. Further, we propose interaction effects between option framing and product type (utilitarian vs. hedonic) on perceived risk. Using a quasi-experimental design, we constructed four scenarios (2 option price framings x 2 product types). We administered the scenario-based survey among part-time MBA students (full-time managers). Analysis results of 132 responses demonstrated that customer responses in perceived risk, perceived fairness and affect were more favorable in the additive option framing, which in turn led to higher purchase intention. Further, these effects were stronger for utilitarian products. For hedonic products, no difference in perceived risk was observed between the two option price framings. Consequently, our study offered an explanation for when and why the additive option price framing might work better.

CSA, a cement mineral compound that is mainly composed of 3CaO·3Al2O3·CaSO4, generates ettringite as a hydration product after a reaction with glass (lime), gypsum and water to speed up the hardening process and enhance the strength and degree of expansion. When used as a cement admixture, there is increased production of ettringite, which can improve the initial strength in the first three days and ameliorate the reduction in the initial strength caused by the use of fly ash in particular. In this study, a hydrate analysis was performed using XRD and SEM after substitution with fly ash (30%) and CSA (8%) with the goal of observing the effect of CSA on the initial strength of a cement mixture containing fly ash. The results of the analysis showed that an addition of CSA promoted the production of ettringite and improved the initial strength, resulting in the generation of hydrates, which can effectively enhance the long-term strength of these materials.

In this study, STS 316L powders with 3 wt.% Cu and 1 wt.% Sn known as corrosion-resistance reinforce- ment elements, are prepared to make different kinds of specimens, in which, 3 wt.% Cu and 1 wt.% Sn are added in different forms by mixing, alloying and fully alloying. After sintering in the same condition, the corrosion resistance, wear resistance and their mechanical properties of specimens are tested respectively. According to the comparison, STS 316L specimen sintered at 1270o C showed the most excellent mechanical property: HRB 78 (hardness), 1130.7 MPa (RCS), 26.6% (Fraction Wear), It was similar with the specimen made of STS316L and fully alloyed Cu and Sn pow- ders, meanwhile, the latter one appears the best corrosion resistance, 75hrs-salt immersion test results. In addition, the specimens with Cu and Sn powders additive showed relatively worse wear resistance in compared with STS316L spec- imen.

기체분리용 분리막의 투과성능을 향상시키기 위해 비이온성 첨가제로 Triton X-100을 사용하여 건습식 상분리법에 의하여 polysulfone 중공사 막을 제조하였으며, 첨가제에 따른 기체투과 거동의 변화를 관찰하였다. 또한 에어갭, 고분자의 농도, 도프탱크 온도와 같은 다양한 방사 조건을 조절하여 그 영향을 관찰하였다. 제조된 중공사 막은 전자주사현미경(SEM)과 bubble flow meter를 통해 각각 모폴로지와 기체투과 특성에 대한 평가를 실시하였다. SEM 분석을 통해 Triton X-100이 첨가된 막은 다양한 에어갭에서도 매끄러운 외부 스킨층을 가지는 것을 확인하였다. 중공사 막의 거대기공은 에어갭이 4에서 90 cm로 증가함에 따라 더욱 발달하며, 높은 투과도를 나타내는 것을 확인하였다. 또한 상대적으로 낮은 고분자 농도(30 wt% polysulfone)와 높은 첨가제 농도(15 wt% Triton X-100) 조건에서 높은 투과도를 나타내었다. 도프 탱크 온도를 조절하였을 때, 100℃에서 제조된 막은 첨가제와 용매의 휘발로 인해 낮은 투과특성을 나타냈다.