An electrical double-layer capacitor is fabricated with biomass-derived activated carbon (AC) and multi-walled carbon nanotubes (MWCNTs), which are synthesized from Pongamia pinnata fruit shell and its seed oil, respectively. The activated carbon is produced by the chemical activation process at varying carbonization temperatures from 600 to 900 °C for 5 h at a rate of 10 min in an N2 atmosphere. The surface area of activated carbon and MWCNTs is 1170 m2 g− 1 and 216 m2 g− 1, respectively. The total pore volumes of activated carbon and MWCNTs are 1.51 cm3 g− 1 and 0.5907 cm3 g− 1, respectively. The as-prepared AC and MWCNTs are characterized by surface area analysis Brunner–Emmett–Teller method (BET), X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopic analysis, field emission scanning electron microscopy, high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. The electrochemical performances of AC-AC, MWCNTs-MWCNTs and AC-MWCNTs (25:75) symmetric electrodes are studied by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The AC-MWCNTs (25:75) single electrode performance is also studied in two different electrolytes, such as 0.5 M Na2SO4 and 0.5 M H2SO4. The fabricated AC-MWCNTs (25:75) symmetric supercapacitor cell exhibits excellent electrochemical performance in 0.5 M Na2SO4. It shows a specific capacitance of 55.51 Fg− 1, energy density 4.852 Wh Kg− 1 and power density of 199.18 W Kg− 1 at a current density of 1 Ag− 1 in the voltage window of 0–1.8 V. The AC-AC and AC-MWCNTs (25:75) symmetric supercapacitor electrodes show outstanding performance.

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

본 연구는 다중벽 탄소나노튜브(MWCNT)로 보강된 복합재 구조의 동적 해석을 다루었다. Mori-Tanaka 모델을 기반으 로 MWCNT 중량 비율, 패널의 곡률, 그리고 CNT의 임의 배열이 복합재의 동적거동에 미치는 상호작용을 연구하였다. 본 연구 결과는 CNT의 부피함유비율의 변화에 따른 복합재의 유효탄성계수를 예측하는 기존 문헌결과와 비교하여 검증하였다. 수치해 석 예제는 복합재의 동적 특성을 평가함에 있어서 MWCNT 보강의 불규칙한 배열 또는 기울어진 방향으로 배치된 효과에 대한 중요성을 제시하였다.

Individual multi-walled carbon nanotubes (MWCNTs) were exposed to the electron beam of 200 kV energy and high resolution transmission electron micrographs were recorded at several time intervals. Interestingly, the nucleation of diamond nanoparticles with in the highly disordered MWCNT matrix upon electron-irradiation is observed. This happens without any assistance of high pressures and temperatures. High pressure X-ray diffraction experiments were performed on core/shell structures which suggest that even the closed structures of carbon resist any inward pressure, thereby ruling out the possibility of a hypothetical internal pressure under the electron irradiation conditions. Our experiments suggest that the transformation of graphitic carbon into diamond in the size window of a few nanometers is possible due to the stability of the diamond and a selective dissolution effect of 200 kV electrons on graphite. A mechanism for the same is proposed.

Rapid development of carbon nanotubes (CNTs) reinforced to polymer composites has been recently noticed in many aspects. In this work, the latest developments on fatigue and fracture enhancement of polymer composites with CNTs reinforcement with diverse methods are thoroughly compiled and systematically reviewed. The existing available researches clearly demonstrate that fatigue fracture resistance of polymer composites can be improved accordingly with the addition of CNTs. However, this work identifies an interesting research gap for the first time in this field. Based on the systematic reviewing approach, it is noticed that all previously performed experiments in this field were mostly focused upon studying one factor only at a time. In addition, it is also addressed that there were no previous studies reported a relationship or effect of one factor upon others during examining the fatigue fracture of carbon nanotubes. Moreover, there was no adequate discussion demonstrating the interaction of parameters or the influence of one parameter upon another when both were examined simultaneously. It is also realized that the scope of the conducted fatigue fracture studies of carbon nanotubes were mainly focused on microscale fatigue analysis but not the macroscale one, which can consider the effect of environment and service condition. In addition, the inadequacy of fatigue life predicting models via analytical and numerical methods for CNT-reinforced polymer composites have also been highlighted. Besides, barriers and challenges for future directions on the application of CNT-reinforced polymer composite materials are also discussed here in details.

We investigated the electronic and mechanical properties of single-walled carbon nanotubes (SWCNTs) with different tube diameters using density functional theory (DFT) and molecular dynamics (MD) simulation, respectively. The carbon nanotubes’ electronic properties were derived from the index number ( n 1 , n 2 ), lattice vectors, and the rolled graphene sheet orientation. For (6,1) SWCNT, ( n 1-n 2)/3 is non-integer, so the expected characteristic is semiconducting. We have considered (6,1) Chiral SWCNT with different diameters ‘d’ (4.68 Å, 4.90 Å, 5.14 Å, 5.32 Å, 5.53 Å) corresponds to respective bond lengths ‘  ’ (1.32 Å, 1.38 Å, 1.45 Å, 1.50 Å and 1.56 Å) and then analyze the electronic properties from the Linear Combination of Atomic Orbitals (LCAO) based on DFT. We have used both the DFT-1/2 and GGA exchange energy correlation approximations for our calculation and compared the results. In both cases, the energy bandgap is decreasing order with the increase in bond lengths. The lowest value of formation energy was obtained at the bond length  = 1.45 Å ( d = 5.14 Å). For the mechanical properties, we have calculated Young’s modulus using molecular dynamics (MD) simulations. From our calculation, we have found that the (6,1) SWCNT with bond length 1.45 Å ( d = 5.14 Å) has Young’s modulus value of 1.553 TPa.

In order to extend the business viability of carbon nanotubes (CNTs), research on CNT dispersion in a solvent as well as in polymer matrix should be established. Herein, three kinds of dispersing agents, sodium deoxycholate (DOC), sodium dodecylbenzene sulfonate (NaDDBS), polyvinyl pyrrolidone (PVP), are selected and applied to quantify the dispersibility and dispersion stability of CNT aqueous dispersion. The dispersibility of CNT dispersion with the PVP, evaluated via viscosity and particle size analyses, are superior to those with the DOC and NaDDBS dispersing agents. CNT aqueous solution dispersed with PVP showed slightly higher viscosity and narrower particle size distribution than those with DOC and NaDDBS dispersing agents. In addition, the dispersion stability of CNT dispersion with the PVP, measured via lumisizer analyses, are superior to those with the DOC and NaDDBS dispersing agents. HR-TEM analysis verifies that the outstanding dispersibility and dispersion stability of CNTs in aqueous solution are due to the effect of the robust polymer wrapping of the PVP dispersing agent on the CNT surface. From the results of this study, the guidelines for the selection of the suitable dispersing agents and the systematic evaluation of dispersibility and dispersion stability of CNT dispersions can be suggested.

Sensing of volatile organic compounds (VOCs) is a growing research topic because of the concern about their hazard for the environment and health. Furan is a VOC produced during food processing, and it has been classified as a risk molecule for human health and a possible biomarker of prostate cancer. The use of carbon nanotubes for VOCs sensing systems design could be a good alternative. In this work, a theoretical evaluation of the interactions between furan and zigzag single-wall carbon nanotubes takes into account different positions and orientations of the furan molecule, within a density-functional theory first-principles approach. The van der Waals interactions are considered using different exchange-correlation functionals (BH,C09, DRSLL and KBM). The results indicate that vdW-functionals do not significantly affect geometry; however, the binding energy and the distance between furan and nanotube are strongly dependent on the selected exchange-correlation functional. On the other hand, the effects of single and double vacancies on carbon nanotube are considered. It was found that the redistribution of charge around the single-vacancy affects the bandgap, magnetic moment, and binding energy of the complex, while furan interaction with a double-vacancy does not considerably change the electronic structure of the system. Our results suggest that to induce changes in the electronic properties of carbon nanotubes by furan, it is necessary to change the nanotube surface, for example, by means of structural defects.

Carbon nanotube (CNT) grafted with hyperbranched poly(amidoamine) (PAMAM) dendrimer (CNTD) were used as a multifunctional curing and composite agent of polyurethane (PU) terminated with epoxy units. Amino-functionalized CNT was used as the core for grafting the first generation of PAMAM dendrimer by sequential addition of methyl acrylate and ethylenediamine. Two different epoxy-terminated PUs (PUB and PU-PMDA) were prepared from the reaction of poly(ethylene glycol), excess amounts of hexamethylene diisocyanate, and different chain extenders (1,4-butanediol for PUB and pyromellitic dianhydride (PMDA) for PU-PMDA), and subsequent end group transformation of the isocyanate groups to epoxy functionalities using glycidol. Fourier transform infrared spectra and thermogravimetric analysis (TGA) results showed that CNTD was successfully prepared. TGA thermograms revealed that thermal decomposition of composites were carried out in two main steps related to the soft and hard segments. In addition, char content and thermal stability of the composites were increased with increasing the CNTD content. Most importantly, the PMDA chain extender resulted in high thermal stability of the epoxy-terminated PU composites. X-ray diffraction and scanning and transmission electron microscopies presented morphological and structural properties of nanotubes and hybrid composites.

Vertically Aligned Carbon Nanotubes (VACNTs)-coated flexible aluminium (Al) foil is studied as an electrode for supercapacitor applications. VACNTs are grown on Al foil inside thermal Chemical Vapor Deposition (CVD) reactor. 20 nm thick layer of Fe is used as a catalyst while Ar, H2 and C2H2 are used as precursor gases. The effect of growth temperature on the structure of CNTs is studied by varying the temperature of CVD reactor from 550 °C to 625 °C. Better alignment of VACNTs arrays on Al foil is recorded at 600 °C growth temperature in comparison to other processing temperatures. Cyclic voltammetry results shows that VACNTs-coated Al foil has a specific capacitance of ~ 3.01 F/g at a scan rate of 50 mV/s. The direct growth of VACNT array results in better contact with Al foil and thus low ESR values observed in impedance spectroscopy analysis. This leads to a fast charge–discharge cycle as well as a very high value of power density (187.79 kW/ kg) suitable for high power applications. Moreover, wettability study shows that the fabricated VACNT electrode has a contact angle of more than 152° which signifies that it is a superhydrophobic surface and hence shows lower specific capacitance in comparison to reported values for VACNT array. Therefore, it is necessary to develop suitable post-processing strategies to make VACNTs hydrophilic to realize their full potential in supercapacitor applications.

Aluminium metal matrix composites (AMMCs) are the fastest developing materials for structural applications due to their high specific weight, modulus, resistance to corrosion and wear, and high temperature strength. Carbon nanotubes (CNTs) is known as the material of the twenty-first century for its various applications in structural components for their high specific strength as well as functional materials for their exciting thermal and electrical characteristics. The present study comprise a systematic literature review of Al/CNT nanocomposites fabricated through a solid state friction stir processing. The present review is primarily focussed on the dispersion and survivability of CNTs in the Al matrix because these are the key factors in deciding the mechanical properties of the fabricated composite. Additionally, the formability, weldability and machinability of the FSPed fabricated composites reinforced with CNTs are also summarised here. Based on the detailed literature review, following research gaps are identified which require a critical and more focussed attention of the scientific community working in this research area: (i) the presence of agglomeration or clustering of CNTs in the composite, (ii) survivability and shortening of CNTs during FSP, (iii) interfacial reactions or the formation of reaction products (such as Al4C3) between Al matrix and CNTs, and (iv) the unidirectional alignment of CNTs in the fabricated composite. Important suggestions for further research in effective dispersion of CNTs with its preserved structure by FSP are also provided.

Recent years have witnessed remarkable development in the field of nanotechnology and it has been affirmed that carbonbased nanomaterials have wide applications in agriculture, industrial, biomedical and environmental sectors. Due to distinctive physicochemical properties of the carbon nanotubes (CNTs), they have been extensively utilized in plant science as a growth promoter, and thus, could be a boon for biomass production of agricultural products. Studies suggest that CNTs help increase the plant’s ability to absorb water and essential nutrients, thereby increasing growth. Apart from this, CNTs have been scrutinized for their utilization in genetic engineering for the delivery of genes, proteins or drugs. However, the literature discloses mixed effects of CNTs exposure on plants like in inducing oxidative stress by generating reactive oxygen species (ROS). Moreover, studies concerning CNTs interaction with plant system is at a nascent stage and needs further investigations to explore the mechanisms influencing the growth and toxicity in plants. Therefore, this review attempts to highlight the current literature on CNTs (including both single walled and multi walled) exposure on plants. It also explores unresolved challenges, as well as recommendations to ensure sustainable development of CNTs while minimizing any possible adverse health impacts.

Compared to carbon nanotubes (CNTs), graphene possesses high strength due to wrinkled surface texture caused by a high density of surface defects which benefits more contact with the polymer material than a rolled-up CNT. In the present review, we have discussed and compared the various properties of CNTs (1-D) and graphene (2-D) obtained in experimental results. The effects of covalent and non-covalent functionalization of CNTs and graphene on the properties of its composites have also been reviewed and compared. A comparative analysis has been carried out between CNTs and graphene-reinforced polymer composites. Furthermore, the synergetic effects of CNTs and graphene hybrid nanofiller on the mechanical properties of polymer composites have also been briefly discussed. Finally, this review concludes with the potential application and future challenges are discussed with regards to filler and their polymer composites.

In this study, a new method of rapid preparation of carbon nanotube (CNT) solution with highly dispersed morphology by free arc excitation is proposed, which shortens the time of the preparation of CNT solution with low concentration. The principle is that the high-energy flow density heat generated by the free arc makes the vaporizable substance coated on the surface of CNTs vaporize rapidly, and then generates the bulk increasing motion, which makes the CNTs aggregates dispersed, and finally forms the CNTs gas-phase dispersion monomer with high dispersion or the cross-linking morphology of few CNTs. In this paper, the influence of gum Arabic (GA) and deionized water (DI water) contents in CNTs mixed electrode on the dispersion of CNTs in different environments (gas phase and liquid phase) is explored. In the limited case of this work, the dispersion effect is better when the mass ratio of CNTs, GA and DI water is 1:0.04:3.96 in the liquid-phase environment. The preparation method reported in this work is expected to be a rapid way to obtain low-concentration nanodispersion.

In this study, we report a controlled one-pot green synthesis of multiwalled carbon nanotubes (MWCNTs) via pyrolysis of sustainable agriculture waste (chickpea peel) at 400 °C in aqueous medium. These MWCNTs demonstrated 7.0 nm diameter, 0.28 nm graphitic spacing with carbonyl, hydroxyl, and carboxylic acid functionality. The D band (presence of sp3 defects) and G band ( E2g mode of graphite) at 1350 cm−1 and 1580 cm−1 originated in Raman spectrum, respectively. The prepared MWCNTs showed blue fluorescence with 10% fluorescence quantum yield in aqueous medium. The MWCNTs showed triple exponential decay characteristics with an average fluorescence lifetime of 4.7 ns. The synthesized MWCNTs revealed a consistent fluorescence in the cytoplasm of 22RV1 human prostate carcinoma cell line without exerting any sign of cytotoxicity. The MWCNTs also exhibited remarkable cytocompatibility in human immortalized prostate epithelial RWPE1 cells.

In order to improve the thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites, carbon nanotubes (CNTs) were introduced by electrophoretic deposition. After modification, the flexural strength of the composites increases by 53.0% due to the greatly strengthened interfaces. During thermal shock between 1100 °C and room temperature for 30 times, the strength continues to increase, attributed to the weakened interfaces in favor of fiber and CNT pull-out. By introducing CNTs at interfaces, thermal conductivity of the composites along the fiber axial direction decreases and that along the fiber radial direction increases. As the thermal shock process prolongs, since the carbon structure integrity of CNT and matrix in the modified composites is improved, the conductivity increases whatever the orientation is, until the thermal stress causes too many defects. As for the anti-ablation performance, the mass ablation rates of the CNT-modified composites with fibers parallel to and vertical to the flame decrease by 69.6% and 43.9% respectively, and the difference in the mass ablation rate related with fiber orientations becomes much less. Such performance improvement could be ascribed to the reduced oxidative damage and the enhanced interfaces.

To investigate the effect of gas dispersing carbon nanotubes (CNTs) and hot pressing method on the transparency and the conductivity of thin films, the free arc was used to disperse the CNTs in a high dispersion rate, and the dispersed CNTs were rapidly pressed into the surface of the PET film by hot pressing to obtain electrical conductivity. The relationship between the light transmission and sheet resistance of the film was studied by changing the deposition time and the presence or absence of electrostatic adsorption. It was found that the CNTs modified film still retains good electrical conductivity (sheet resistance up to 6 × 104 Ω, light transmittance 69%) through the cleaning of surfactants and ultrasonic waves, which proves that hot pressing is a simple physical method to achieve effective combination of CNTs and films.