Among the test categories of the personal dosimetry performance test in Korea, the reference neutron radiation field used for the mixed neutron-photon radiation field is generated by a D2Omoderated 252Cf source. There are some differences depending on the standards, D2O-moderated 252Cf source consists of the 252Cf source surrounded by the D2O sphere with a diameter of 30 cm, covered with a Cd shell of thickness approximately 0.051 cm ~ 0.1 cm. In order to optimize the design of the D2O sphere and establish the neutron radiation field for the personal dosimetry performance test in Central Research Institute of KHNP, the neutron spectra have been simulated by MCNP 6.2 code by design conditions and evaluated dose conversion coefficients. In the consideration of neutron irradiation facility, the basic design structure was determined a D2O sphere with a diameter of covered with a Cd shell and a cylindrical well is in the middle of sphere. Neutron source transfer tube is inserted into this well-shaped structure and neutron source was withdrawn from the tube. And by changing the following design conditions in detail, the neutron spectra were evaluated; 1) the entire diameter of the D2O sphere (with or without the diameter of 7.5 cm of well-shaped structure) 2) the location of the neutron source (distance from D2O) 3) thickness of Cd shell 4) purity of D2O. As a source spectrum, the spectrum of bare- 252Cf recommended by ISO 8529-1 was adopted and spectra were tallied using F4 tally at a distance of 120 cm from the neutron source. Finally, the fluence to dose conversion coefficients were calculated using the simulated spectra. As a result of the evaluation, in case that an entire diameter of the D2O sphere with a diameter of the source tube is 37.5 cm, the fluence to dose conversion coefficient was evaluated to about 4.4% lower than an entire diameter of the D2O sphere is 30 cm. And in case that the distance between the D2O and the top of the neutron source was about 3.75 cm which is a radius of well-type structure, it was evaluated to about 1.4% larger than the distance was about 1 cm, and when the thickness of Cd was 0.1 cm, it was evaluated to 0.8% larger than when it was 0.051 cm. Finally, when the purity of D2O was 99.99%, it was evaluated 1.5% lower than when it was 99%. Except for the diameter of D2O sphere, the differences on the other conditions are acceptable considering the uncertainty of the simulation. Therefore, the design of D2O-moderated 252Cf source was determined by considering source integrity, economic perspectives, and dose conversion coefficient given in ISO 8529: a D2O sphere with an entire diameter of 37.5 cm, filled with above 99% purity of D2O, and covered with a cadmium thickness of 0.1 cm. The fluence to dose conversion efficient was evaluated as 110.10 pSv cm2 for ambient dose H*(10), 115.21 pSv cm2 for personal dose Hp(10) respectively.

Open source "Boost Lib" in this paper is to propose a distributed processing architecture of the game server, and the server models the whole vertical extension of the load generated by a specific process, the load on the game server for both the horizontal scale model of a typical distributed system, Dispersing the processing game process, and corresponds to the load.Multi-server architecture is distributed into the game world to the local level. Since the distributed server to process by integrating the entire process of the game server divided area, when only a specific process, the throughput increases a load to cause the load itself is transferred, the entire game server the local server is slow. If the load is generated in the specific process in the multi-server architecture must scale the game server or the game server cluster. However, while the load of a particular server extensions are uneconomic to process less meaningless. Therefore, the conventional method of dispersing uniformly without separate operations for all the processes are dispersed to the more process unit will be more and better ways to game services in general reliable service throughout is possible. for all the processes are dispersed to the more process unit will be more and better ways to game services in general reliable service throughout is possible.

본 연구에서는 화력발전소에서 온배수의 형태로 배출되는 폐열을 히트펌프의 열원으로 이용하여 온실의 난방에 활용할 수 있는 히트펌프 시스템을 설계 제작하였으며, 난방 성능을 분석하여 PE 파이프 열교환기의 설계기준을 제시하고자 하였다. PE 파이프 열교환기의 내경은 20mm, 두께는 2mm였으며, Roll의 직경은 1,000mm로 하였다. 연구결과 PE파이프 열교환기의 적정 길이는 1.0RT당 75m로 설계하는 것이 바람직할 것으로 판단되었으며, 이때 히트펌프시스템의 난방성능계수(COPh)는 3.8로 나타났다.

웹 기반의 온라인 교육은 강의실에서 수업하는 면대면 강의의 부족한 점을 보완하는 가장 효과적인 방법 중의 하나이다. 웹을 이용한 학습은 자기주도적인 학습이 가능하고 학습자와 교수자 간의 상호 보완적인 학습이 이루어질 수 있다는 장점이 있기 때문이다. 이러한 온라인 교육을 효과적으로 지원하기 위해서는 학습관리 또는 콘텐츠관리 기능을 제공해주는 학습관리시스템이 필요하다. 학습자들에게 양질의 온라인 콘텐츠를 제공하고자 하는 교사들을 위해 개발된 학습관리시스템 중 하나가 Moodle LMS이다. Moodle LMS는 소스가 공개되어 있어 누구나 필요한 사람은 소스를 개선, 확장, 활용할 수 있다. 따라서, 본 논문은 Moodle LMS를 활용하여 교수자가 교양 사이버강좌를 쉽게 개설하고 관리․운영할 수 있는 학습관리시스템을 확장하여 활용하는데 목적이 있으며 이를 확장하면 온라인 게임도 관리․운영할 수 있다.

PC 패키지 게임 <Sims3>와 소셜네트워크게임(SNG) <Social Sims>의 스토리텔링을 그레마스의 기호학을 적용하여 분석하였다. 이를 위해 다차원적 접근이 요구되는 게임 스토리텔링 과정을 표면, 표층, 심층층위와 같이 3가지로 구분하였다. 표면과 표층층위의 스토리텔링은 ‘행동자 모델’을 적용하여 분석하였으며 심층층위의 스토리텔링은 상호작용성을 기준으로 다시 세분하고 ‘기호학 사각형’을 적용하였다. 그 결과 PC 플랫폼 기반의 <Sims3>가 가지는 ‘외적 창조적’ 상호작용성이 SNG <Social Sims>에서는 ‘내적 해석적’ 상호 작용성으로 변환되었고, 스토리텔링 논리 역시 ‘전능적 서사’에서 ‘사회적 서사’로 전환되었음을 알 수 있었다. 본 연구를 통해 기존 콘텐츠가 새로운 플랫폼에 적용되기 위해서는 이용자의 요구를 반영한 스토리텔링 전환이 필요함을 알 수 있다.

The purpose for this paper is to categorize and analyze the aesthetic characteristics of graphic factors in contemporary fashion design by media source. Focused on play-instinct visual expression in contemporary fashion design and adopted media source following the way of communication design. A variety of literatures and online sites for graphic factors in contemporary fashion was studied. The standard of media source is classified as graphic media-source: photography media-source, typography media-source, illustration media-source. With this standard, expressed ways are as followings. First, graphic media-source in play-instinct expressional fashion design is mostly borrowing existed character or using designer’s brand logo. Second, photography media-source in play-instinct expressional fashion design is placed photograph of social issued people in front of shirt. Third, typography media-source in play-instinct expressional contemporary fashion design is mostly expressed social messages or designer’s name in brand. Fourth, illustration media-source is the best way to express play-instinct visual expression. Based on these, aesthetic characteristics of graphic factor in contemporary fashion by media source are classified as three: social words, playfulness and information transference. Frequency ratio using media source per aesthetic characteristics is different and these are able to categorize expression way and image feature. In conclusion, expressional way of graphic factors in contemporary fashion design became diverse as social and cultural changing. Frequency of graphic factor use in contemporary fashion is increased than before. This paper suggested that fashion design is one of the way of communicating with people and should be analyzed graphic factors in contemporary fashion design.

한국방사성폐기물관리공단 주관 하에 개념 설계된, 연소도이득효과 적용 대용량 수송용기에 대해 방사 선 차폐 안전성을 평가하였으며 여러 방사선원들이 수송용기 주변 선량률 분포에 미치는 영향을 분석하였다. 가능한 모든 방사선원(중성자선원, 감마선원, 방사화선원)들을 고려하였으며 보수적인 가상의 핵 연료(너비: WH 17 RFA, 축방향: CE Type)를 선정, 실제 상황과 동일한 조건이 되도록 계산모델을 구축 하였다. 모든 조건(정상 및 가상사고 조건)에서 표면선량률과 외부선량률이 법적기준치를 만족하고 있었 으며 축방향 높이에 따라 각 선원들의 기여도가 변하고 있었지만 정상조건에서의 최대 표면선량률과 외 부선량률은 방사화선원에 의한 영향이 가장 높은 것으로 확인되었다. 가상사고 조건에서는, 중성자선원 의 선량률 기여도가 대략 90%에 달하고 있었으나 수송용기 끝단에서는 방사화선원에 의한 선량률이 급 격하게 상승함에 따라 BUC 적용 수송용기의 방사선 차폐해석시 충분히 보수적으로 해석되도록 방사화선 원을 정밀하게 분석하여 설정하여야 할 것으로 판단되었다.

This study aims at searching the Church Building Type and Design Sources of a German church architect who had designed many churches and other buildings in Korea. P. Alwin Schmid(1904-1978) had designed 188 Catholic buildings in Korea for 20 years from 1958 to 1978. In his works there are many excellent Catholic ritual buildings. It was caused by his conviction on the theology and the principles of Church Architecture. And His remarkable achievement is affected by the works of Dominikus Bo"m(1880-1955) and Rudolf Schwarz(1897-1961). Alwin's 5 plan type is relevant to Schwarz' iconographic model, and their approach to 'light' is much the same. But the Character of inner space is the middle of Dominikus Bo"m and Rudolf Schwarz. His works rotted in the Liturgical Movement had been developed in the line of connection with 20th German church architecture. The works of Dominikus Bo"m and Rudolf Schwarz played the role of the teacher of Alwin Schwarz.

최근, 감마선 조사기의 자동 원격 조사 제어기가 오동작하여 방사선작업종사자가 방사선 피폭 사고가 지 속적으로 보고되고 있다. 이에 NDT 분야에서는 방사선에 대한 잠재적 사고를 미연에 방지하기 위한 방사 선원 모니터링 시스템 구축에 많은 시간과 재원을 투자하고 있다. 이에 본 연구에서는 다양한 비파괴검사 장비에 범용적으로 적용할 수 있는 방사선원 위치 모니터링 시스템의 개발을 위한 선행연구로써 몬테카를 로 시뮬레이션을 통해 산화납 기반 방사선 검출기에 대한 감마선 응답 특성을 모의 추정하였다. 연구 결과, 방사선 검출기의 최적화 두께는 방사선원에서 방사되는 감마선 에너지에 따라 상이하며 에너지가 증가함 에 따라 최적화 두께가 점차 증가하는 것으로 나타났다. 결론적으로 PbO 기반 방사선 검출기의 최적화 두 께는 Ir-192에 대하여 200 μm, Se-75 150 μm, Co-60 300 μm로 분석되었다. 이러한 연구 결과를 바탕으로 범 용적으로 적용하기 위하여 2차 전자 평형을 고려한 PbO 기반 방사선 검출기의 적절한 두께는 300 μm로 평 가되었다. 이러한 결과는 차후 다양한 NDT 장비에 범용적으로 적용하기 위한 방사선원 위치 모니터링 시 스템을 개발 시 방사선 검출기에서 요구되는 적절한 두께를 결정하는데 있어 기초자료로 활용될 수 있을 것으로 사료된다.

In the non-destructive inspection field, we invest a lot of time and resources in developing the radiation source system to ensure the safety of the workers. However, the probability of accidents is still high. In order to prevent potential radiation accidents in advance, it is necessary to directly verify the position of the radiation source, but the research is still insufficient. In this study, we developed a monitoring system that can detect the position of the radiation source in the source guide tube in the gamma-ray irradiator. The characteristics of the radiation detector are estimated by monte carlo simulation. As a result, the radiation detector for Ir-192 gamma-ray energy was analyzed to have secondary electron equilibrium at 150 μm regardless of the semiconductor material. Also, it is expected that the gamma ray response characteristic is the best in HgI2. These results are expected to be used as a basis for determining the optimal thickness of the radiation detector located in the detection part of the future monitoring system. In addition, when developing a monitoring system based on this, radiation workers can easily recognize the danger and secure safety, as well as prevent and preemptively respond to potential radiation accidents.

This study was performed to analyze the effects of a water circulation green area plan on non-point source pollution in Gimhae South Korea. A quantitative analysis of Arc-GIS data was conducted by applying a watershed model based on Fortran to investigate the changes to direct runoff and pollution load. Results showed that prior to the implementation of the water circulation green area plan in Gimhae, direct runoff was 444.05 m3/year, total biological oxygen demand (BOD) pollution load was 21,696 kg/year, and total phosphorus (TP) pollution load was 1,743 kg/year. Implementation of the development plan was found to reduce direct runoff by 2.27%, BOD pollution load by 1.16% and TP pollution load by 0.19% annually. The reduction in direct runoff and non-point source pollution were attributed to improvements in the design of impermeable layers within the city.