본 연구에서는 마커없이 구조물의 변위를 측정할 수 있는 영상기반 변위계측 시스템(NVDMS)을 제안한다. 기존의 방식 과 제안하는 NVDMS는 크게 두 가지의 차이점이 있다. 첫째, NVDMS는 마커를 사용하지 않고 구조물의 특징점의 픽셀좌 표 변화를 추출한다. 둘째, 특징점의 픽셀좌표를 물리좌표로 변환하는 scaling factor는 기존 방식에선 마커의 크기로부터 계 산되는 반면, NVDMS에서는 카메라와 구조물사이의 거리, 각도, 초점거리로 계산된다. 3층 축소모형의 자유진동 실험에서 제안한 NVDMS로부터 얻은 변위데이터의 신뢰도를 분석하기 위해 LDS로부터 얻은 변위데이터의 비교를 하였으며, 얻어진 변위데이터를 이용하여 동특성을 분석하였다. 분석결과 NVDMS는 마커없이 구조물의 동적변위를 정밀하게 측정가능할 뿐 만 아니라 얻어진 변위데이터로부터 추출한 동특성의 신뢰도 또한 높았다.

본 연구에서는 마커없이 구조물의 변위를 측정할 수 있는 영상기반 변위계측 시스템(NVDMS)을 제안한다. 기존의 방식과 제안하는 NVDMS는 크게 두 가지의 차이점이 있다. 첫째, NVDMS는 마커를 사용하지 않고 구조물의 특징점의 픽셀좌표 변화를 추출한다. 둘째, 특징점의 픽셀좌표를 물리좌표로 변환하는 scaling factor는 기존 방식에선 마커의 크기로부터 계산되는 반면, NVDMS에서는 카메라와 구조물사이의 거리, 각도, 초점거리로 계산된다. 3층 축소모형의 자유진동 실험에서 제안한 NVDMS로부터 얻은 변위데이터의 신뢰도를 분석하기 위해 LDS로부터 얻은 변위데이터의 비교를 하였으며, 얻어진 변위데이터를 이용하여 동특성을 분석하였다. 분석결과 NVDMS는 마커없이 구조물의 동적변위를 정밀하게 측정가능할 뿐만 아니라 얻어진 변위데이터로부터 추출한 동특성의 신뢰도 또한 높았다.

Ni(OH)2 hollow spheres have been prepared by solvent displacement crystallization using a micro-injection device, and the effect of process parameters such as concentration and the relative ratio of the injection speed of the precursor solution, which is an aqueous solution of NiSO4·6H2O, to isopropyl alcohol of displacement solvent have been investigated. The crystal phases after NaOH treatment are in the β-phase for all process parameters. A higher concentration of NiSO4·6H2O aqueous solution is injected by a micro-injection device and bigger Ni(OH)2 hollow spheres with a narrower particle size distribution are formed. The crystallinity and hardness of the as-obtained powder are so poor that hydrothermal treatment of the as-obtained Ni(OH)2 at 120oC for 24 h in distilled water is performed in order to greatly improve the crystallinity. It is thought that a relative ratio of the injection speed of NiSO4·6H2O to that of isopropyl alcohol of at least more than 1 is preferable to synthesize Ni(OH)2 hollow spheres. It is confirmed that this solution- based process is very effective in synthesizing ceramic hollow spheres by simple adjustment of the process parameters such as the concentration and the injection speed.

A press which has a 20 percent share in machine tools is one of the production facilities. The press has been used to make a hole or to bend metal plates. However, recently hydraulic press is used to reinforce competitiveness of the manufacturing industry. The press by using metal powder makes products without additional process while conventional processing machine makes products after removing unnecessary parts. In this way, large quantity of products can be produced in a short time. Researches to manufacture products by the press have been proceeding after 1970. In this study, structure and displacement analysis for punch used as the component for hydraulic press was investigated and structural stability was identified based on the results

Displacement response of structure is valuable information for monitoring an structure integrity. However, measuring the displacement response is difficult than other structure responses, such as acceleration, strain, and angle. So, previous researches have focused on displacement estimation technique using measured acceleration. The displacement estimation methods also have weakness that filtering noise of measured data is so complicate. The estimated displacement might be diverged because of the measuring noise. Because of these reasons, this study focused on rotation angle. This study developed a algorithm for estimating displacement and structure deformed shape using rotation angle.

본 연구에서는 온실시공 및 유지관리 지침마련을 위한 기초자료로 사용하기 위하여 플라스틱 필름 온실의 구조재를 대상으로 휨 시험을 실시한 후, 하중-변위의 관계를 검토하였다. 그 결과 시편의 형상 에 관계없이 시편의 규격이 클수록 항복 및 최대하중이 큰 경향을 보였으며, 변위도 동일한 양상을 보 였다. 강관이 각관보다 항복 및 최대하중은 적게 나타났으며, 변위는 크게 나타났으며, 강관의 경우는 항복 및 최대하중 하에서의 변위는 각각 1.42~4.20mm 및 5.80~24.13mm정도의 범위에 있었다. 각관 의 경우에 변위는 각각 1.62~3.00mm 및 3.13~8.01mm정도의 범위였다. 그리고 본 시험의 결과와 기 존의 연구에서 제시한 기준 값들을 보면, 동일한 부재임에도 불구하고 부재들이 사용되는 온실형태나 사용목적(예, 샛기둥)에 따라 큰 차이가 있음을 알 수 있었다. 또한 유리온실인 와이드 스팬 및 벤로 형 을 대상으로 제시하고 있는 경우(, )에도 변형이 각각 28.0mm 및 35.0mm(기둥 길이 280cm 적용)정도로서 네델란드의 유리온실 표준 기준(14.0mm)과 비교해도 큰 차이가 있었다. 스팬 이 60cm인 경우, 주서까래나 도리 부재의 본 시험결과는 기존의 연구에서 제시한 값들 보다 각각 55.7% 및 39.3%정도 크게 나타났다. 그리고 기둥의 경우, NEN의 기준 값인 14.0mm와 비교해서 본 시험결과는 43.7%정도 적은 것으로 나타났다. 따라서 변위제한은 온실의 종류나 형태 및 규격 등 다양 한 요인에 의해서 다를 수 있기 때문에 이들 요인들을 반영한 연구나 시험들을 진행하여 온실 시공 및 유지관리 등에 반영할 수 있도록 하여야 할 것으로 판단되었다.

변위전류 측정법을 L-α-dilauryl phosphatidylcholine(DLPC) 단분자 막의 연구에 적용하였 다. 변위전류는 물 표면에서 DLPC 단분자 층에서 압축과 확장에 의해 발생되었다. 맥스웰 변위전류 (MDC) 발생은 분자 당 점유면적 200 Å2 에서 40 Å2에 대하여 관찰하였다. 맥스웰 변위전류는 단분 자 층의 압축 사이클에 대해 조사하였으며, MDC의 최대 값은 압축 사이클의 표면 압력이 처음 상승하 기 바로 직전의 분자당 점유면적에서 나타나는 것을 알 수 있었다. LB막의 단분자층 표면 형태는 원자 힘 현미경(AFM)으로 측정하였다. 결과적으로, AFM 이미지에 나타난 LB막의 특성은 단분자 층의 배향 이 좋았으며 단분자 층의 두께는 약 5~10 nm였다.

This paper introduces a digital image processing(DIP) method as a method for measuring the displacement of pylon. The comparison of DIP results and ANSYS analysis results verified the validity of the image processing technique. Normalized cross-correlation(NCC) coefficient was used and experiments were performed three times. It shows that the displacement difference was 22% and 5% compared to ANSYS results. Therefore, the image processing method is expected to be able to measure the displacement of pylon sufficiently.

There has been an increasing demand for introducing a base isolation system to secure the seismic safety of a nuclear power plant. However, the design criteria and the safety assessment methodology of a base isolated nuclear facility are still being developed. A performance based design concept for the base isolation system needs to be added to the general seismic design procedures. For the base isolation system, the displacement responses of isolators excited by the extended design basis earthquake are important as well as the design displacement. The possible displacement response by the extended design basis earthquake should be limited less than the failure displacement of the isolator. The failure of isolators were investigated by an experimental test to define the ultimate strain level of rubber bearings. The uncertainty analysis, considering the variations of the mechanical properties of isolators and input ground motions, was performed to estimate the probabilistic distribution of the isolator displacement. The relationship of the displacement response by each ground motion level was compared in view of a period elongation and a reduction of damping. Finally, several examples of isolator parameters are calculated and the considerations for an acceptable isolation design is discussed.

고층 건축물의 내풍설계 시 다차모드 해석의 수행이 필요하다. 고층건축물의 다차모드 해석을 위해서 풍압적분법과 1차모드 해석을 수행하였으며, 풍압적분법을 활용하여 층별 시간이력 전도모멘트를 산출하였다. 층별 전도모멘트를 산출하기 위해 풍압적분법을 활용하였고, 그 방법으로 임의의 층까지의 누적 풍력데이터로부터 층별 시간이력의 전도모멘트를 산출하였다. 풍응답변위는 각 층별 전도모멘트로부터 1차 모드 해석을 수행하여 평가하였다. 본 연구 결과의 그 유효성을 높이기 위해, 건축물 전체에 작용하는 풍력데이터에 의해 얻어진 풍응답 결과와 비교하였다. 두 연구 결과는 유사한 것으로 나타났다.

This research sought to analyze the characteristics of breast movement at the treadmill activity levels. It also examined the effect of wearing a sports bra in reducing breast displacement. The subjects for the data collection were females in their 20s (n=2) with C-cup size breast. The experimental conditions were three different moving speeds (4 km/h, jogging: 7 km/h, and sprinting: 10 km/h) and two types of sports bras. Three dimensional breast displacement was measured. The displacement of the right nipple point was measured with a 3D motion analyzer. The results show that the breasts were greatly displaced from the walking speed (4 km/h) when subjects did not wear any bra. Whereas their breast displacement distance decreased remarkably when they wore sports bras. The nipple point moved 42~44 mm in the vertical direction at walking speed with naked condition. But it was reduced by 80% after wearing sports bras. When subjects running (7 km/h, 10 km/h) without any bra, the nipple point moved 122~141 mm. However it was reduced by 60~70% when they wore sports bras. The apartment time (time delay) between at the highest point of the upper body and the nipple was 0.25 seconds at the running speeds (7 km/h, 10 km/h) without wearing any bra. After wearing sports bras, the time delay was cut to 0.06~0.12 seconds. These results implies that without wearing any bra the skin surrounding the breasts might be seriously pulled at running activity. The functional sports bra suppress breast movement. It might prevent the sagging of breasts by preventing the damage of the Cooper's ligaments.

The purpose of this study was to determine the effect of gait initiation training on gait and center of pressure (CoP) during gait initiation in stroke patients. Twenty-three subjects were randomly assigned to either an experimental group (EG) or a control group (CG). The EG received gait initiation training with increased CoP posterior distances the maximum the rear on gait training. The CG received general gait training. Both groups received training three times a week over a period of four consecutive weeks. The figures for CoP distances the maximum the rear, CoP distances time the mover the maximum the rear, the Tinetti Performance-Oriented Mobility Assessment (POMA), and gait velocity were recorded both before and after the training sessions for both groups. The EG’s results for CoP distances the maximum the rear, CoP distances time the mover the maximum the rear, and POMA improved after training (p<.05). In terms of the rate of change of CoP distances the maximum the rear, the EG demonstrated a significantly higher increase (p<.05) than did the CG. The results of this study suggest that increased CoP distances the maximum the rear affect the gait initiation and gait performance of stroke patients. Further studies with a larger sample size are necessary to verify the accuracy of the results of this study.

백두산에서는 2002년부터 화산성 지진활동의 증가, 정밀 수준측량 관측을 통한 지표면 팽창, 특정 화산가스 방출량의 증가, 온천수의 온도 증가 등 화산 전조활동이 활발해짐으로써 나타나는 전조현상들이 관측되었다. 이러한 관측결과 중 정밀 수준측량 데이터를 활용한 백두산 천지 칼데라 주변의 수직, 수평 지표변위 경향 분석을 통해 2002년 이후 2009년까지 지표가 팽창하는 경향을 나타냄으로써 백두산 지하 마그마 챔버의 부피가 증가하였음을 확인할 수 있었다. 이후 2010년을 기점으로 지표가 수축하는 경향을 나타내기도 하였으나 이후 다시 팽창하는 경향을 나타냄을 확인할 수 있었다. 북측 사면에서 2002년부터 2003년까지 칼데라 외륜산 일대의 지표면이 46.33 mm 융기 팽창한 것을 바탕으로 지하 마그마 챔버의 부피 변화량을 계산해 보면, 약 0.008 km3 (7.7-8.0×106m3)의 부피가 증가한 것으로 계산되었다. 이는 백두산 산정부로부터 지하 약 5 km 지점에 천처 마그마 챔버가 형성되고 0.008 km3의 마그마가 주입된 것으로 해석된다.

This paper presents the theoretical analysis for the flow driven by surface tension and gravity force in an inclined circular tube. The governing equation is developed to describe the displacement of a Newtonian fluid that continuously flew into a circular tube by surface tension, which represents a second-order, nonlinear, nonhomogeneous and ordinary differencial form. It was found that the theoretical predictions of the governing equation were excellent agreement with the unsteady state solutions for horizontal tube and the results of force balance equation for steady state.

In this paper, the current of ECV block is connected to compressor crankcase on which the Pc port of Ps port Euro is formed(Type-1). Pc Port Internal Bellows are supposed to be affected by changes at the flow of refrigerant to the solenoid valve inside inhalation. There is Ps port at the direction of flow characteristic in predicting and analyzing. At suction pressures of 0.2MPa and 1.5MPa, maximum flow rates become 46m/s and 129m/s respectively. The refrigerant is discharged by compressor rotation around the axis of rotation from the inflow of port(Pd)(Type-2). By predicting and analyzing inlet flow, suction pressures become 2.7MPa and 3.6 MPa when maximum flow rates of 177.5m/s and 205m/s are affected on Pc ports of Euros with pressures of 1.2KPa and 3.8KPa respectively. This study result can be applied as the basic data for design of ECV.

In order to predict inelastic displacement response without nonlinear dynamic analysis, the equal displacement rule can be used for the structures with longer natural periods than the characteristic period, Tg, of earthquake record. In the period range longer than Tg, peak displacement responses of elastic systems are equal or larger than those of inelastic systems. In the period range shorter than Tg, opposite trend occurs. In the equal displacement rule, it is assumed that peak displacement of inelastic system with longer natural period than Tg equals to that of elastic system with same natural period. The equal displacement rule is very useful for seismic design purpose of structures with longer natural period than Tg. In the period range shorter than Tg, the peak displacement of inelastic system can be simply evaluated from the peak displacement of elastic system by using the inelastic displacement ratio, which is defined as the ratio of the peak inelastic displacement to the peak elastic displacement. Smooth hysteretic behavior is more similar to actual response of real structural system than a piece-wise linear hysteretic behavior such as bilinear or stiffness degrading behaviors. In this paper, the inelastic displacement ratios of the smooth hysteretic behavior system are evaluated for far-fault and near-fault earthquakes. The simple formula of inelastic displacement ratio considering the effect of Tg is proposed.

Of many approaches to reduce motion analysis errors, the compensation method of anatomical landmarks estimates the position of anatomical landmarks during motion. The method models the position of anatomical landmarks with joint angle or skin marker displacement using the data of the so-called dynamic calibration in which anatomical landmark positions are calibrated in ad hoc motions. Then the anatomical landmark positions are calibrated in target motions using the model. This study applies the compensation methods with joint angle and skin marker displacement to three lower extremity motions (walking, sit-to-stand/ stand-to-sit, and step up/down) in ten healthy males and compares their performance. To compare the performance of the methods, two sets of kinematic variables were calculated using different two marker clusters, and the difference was obtained. Results showed that the compensation method with skin marker displacement had less differences by 30~60% compared to without compensation. And, it had significantly less difference in some kinematic variables (7 of 18) by 25~40% compared to the compensa- tion method with joint angle. This study supports that compensation with skin marker displacement reduced the motion analysis STA errors more reliably than with joint angle in lower extremity motion analysis.

본 연구에서 리드스위치를 이용한 정적변위센서를 무근과 철근 콘크리트 보에 부착하고 균열손상의 모니터링을 위해 무선주파수를 이용하였다. 무근 콘크리트 보와 철근 콘크리트 보에 외력이 작용하면 균열손상이 발생하고 균열의 증진으로 정적변위센서가 파괴되면 이와 연결되어 있는 무선주파수 발신자가 손상신호를 외부로 발신하게 된다. 이러한 기능성 건축부재에 대한 연구는 이상 기후 현상과 지진 등으로부터 건축물이나 주요구조물을 보호하는데 중요한 역할을 담당할 것으로 사료된다.