Phayathonzu temple in Myanmar was made of masonry bricks, and so it was vulnerable to lateral load such as earthquake. Especially, it has many difficulties in structural modeling and dynamic analysis because the discontinuous characteristics of masonry structure should be considered. So, it is necessary to provide the seismic performance evaluation technology through the inelastic dynamic modeling and analysis under earthquake loads for the safety security of masonry brick temple. Therefore, this study analyzes the seismic behavior characteristics and evaluates the seismic performance for the 479 structure with many cracks and deformations. Through the evaluation results, we found out the structural weak parts on earthquake loads.

When an earthquake occurs, the severity of damage is determined by natural factors such as the magnitude of the earthquake, the epicenter distance, soil properties, and type of the structures in the affected area, as well as the socio-economic factors such as the population, disaster prevention measures, and economic power of the community. This study evaluated the direct economic loss due to building damage and the community’s recovery ability. Building damage was estimated using fragility functions due to the design earthquake by the seismic design code. The usage of the building was determined from the information in the building registrar. Direct economic loss was evaluated using the standard unit price and estimated building damage. The standard unit price was obtained from the Korean Real Estate Board. The community’s recovery capacity was calculated using nine indicators selected from regional statistical data. After appropriate normalization and factor analysis, the recovery ability score was calculated through relative evaluation with neighboring cities.

The Gyeongju and Pohang earthquakes caused damages to many cultural properties; particularly, stone pagoda structures were significantly damaged among masonry cultural properties. To preserve these structures, it is necessary to understand their dynamic behavior characteristics under earthquakes. Analyses on such areas as deformation, frequency, maximum acceleration, permanent displacement, sliding, and rocking have to be performed. Although many analytical studies have already been conducted, dynamic behavior studies based on experiments are insufficient. Therefore, this study analyzed dynamic behavior characteristics by performing a shaking table experiment on a three-story stone pagoda structure at the Cheollongsa temple site damaged by the Gyeongju earthquake. As a result of the experiment, the displacements of stylobates did not occur significantly, but the tower body parts rotated. In particular, the rotation of the 1F main body stone was relatively larger than that of the other chief body stones because the 1F main body stone is relatively more slender than the other parts. In addition, the decorative top was identified as the component most vulnerable to sliding. This study found that the 1F main body stone is vulnerable to rocking, and the parts located on the upper part are more vulnerable to sliding.

The spatial variation characteristics of seismic motions at the nuclear power plant's site and structures were analyzed using earthquake records obtained at the Fukushima nuclear power plant during the Great East Japan Earthquake. The ground responses amplified as they approached the soil surface from the lower rock surface, and the amplification occurred intensively at about 50 m near the ground. Due to the soil layer's nonlinear characteristics caused by the strong seismic motion, the ground's natural frequency derived from the response spectrum ratio appeared to be smaller than that calculated from the shear wave velocity profile. The spatial variation of the peak ground acceleration at the ground surface of the power plant site showed a significant difference of about 0.6 g at the maximum. As a result of comparing the response spectrums at the basement of the structure with the design response spectrum, there was a large variability by each power plant unit. The difference was more significant in the Fukushima Daiichi site record, which showed larger peak ground acceleration at the surface. The earthquake motions input to the basement of the structure amplified according to the structure's height. The natural frequency obtained from the recorded results was lower than that indicated in the previous research. Also, the floor response spectrum change according to the location at the same height was investigated. The vertical response on the foundation surface showed a significant difference in spectral acceleration depending on the location. The amplified response in the structure showed a different variability depending on the type of structure and the target frequency.

2004년 5월 29일 발생한 울진해역지진(Mw 5.1)과 관련된 대기 인프라사운드 신호가 철원(진앙 거리 321 km) 및 대전(256 km) 관측소에 기록되었다. 신호의 지속시간은 수 분 이상이며, 음원 방향을 지시하는 후방-방위각은 28 o 이상의 큰 변화를 보였다. 역-투사 방법과 신호 감쇄 보정 결과, 인프라사운드 신호는 삼척-울진-포항까지 연결되는 약 4,600 km2 면적의 지반운동으로 발생하였으며, 음원 최대 크기(BSP)는 11.1 Pa로 계산되었다. 이 결과는 최대지반가속 도(PGA) 자료로 계산한 음원 최대 크기(PSP)와도 부합하고 있으며, 지진 발생 당시 인프라사운드 신호 탐지를 가능케 했던 최소 지반운동은 ~3.0 cm s−2 이상으로 확인되었다. 울진해역지진이 비록 동해 해역에서 발생하였지만, 진앙과 가 까운 강원도 남부-경상북도의 고지대를 따라 전파한 표면파의 지반운동으로 회절 인프라사운드가 효과적으로 발생한 것으로 해석된다. 인프라사운드 관측을 통한 원거리 지진 지반운동 특성 추정 방법은 지진관측망이 설치되어 있지 않거나 관측소 수가 적은 지역을 대상으로 활용이 가능할 것이다.

This study simulated strong ground motion waveforms in the southern Korean Peninsula, based on the physical earthquake modeling of the Southern California Earthquake Center (SCEC) BroadBand Platform (BBP). Characteristics of intensity attenuation were investigated for M 6.0-7.0 events, incorporating the site effects. The SCEC BBP is software generates broadband (0-10 Hz) ground-motion waveforms for earthquake scenarios. Among five available modeling methods in the v16.5 platform, we used the Song Model. Approximately 50 earthquake scenarios each were simulated for M 6.0, 6.5, and 7.0 events. Representative metrics such as peak ground acceleration (PGA) and peak ground velocity (PGV) were obtained from the synthetic waveforms that were simulated before and after the consideration of site effects (VS30). They were then empirically converted to distribution of instrumental intensity. The intensity that considers the site effects is amplified at low rather than high VS30 zones.

액체저장탱크의 지진 거동은 유체-구조물 상호작용에 의해 복잡하게 나타나므로, 이 시스템의 지진응답과 피해를 정확하게 예측 하기 위해서는 이를 엄밀히 고려하여야 한다. 이 연구에서는 유체-구조물 상호작용을 엄밀히 고려하여 양방향 수평 지반운동이 작용 하는 직사각형 액체저장탱크의 지진응답 해석을 수행하고 그 응답 특성을 분석하고자 한다. 이를 위해 지진하중 작용 시 발생하는 유체 동수압을 유한요소 기법을 사용하여 산정하고, 이 동수압을 구조물의 유한 요소에 작용하여 전체 시스템의 동적 거동을 모사한다. 예제 직사각형 액체저장탱크의 지진응답 해석을 통하여 대상 시스템의 동적 거동은 양방향 수평 지반운동이 작용하는 방위각에 의해 유의미한 영향을 받음을 확인할 수 있다. 그러므로 직사각형 액체저장탱크의 내진설계를 수행하거나 내진성능을 검토할 때는 이러한 특성을 고려하여야 할 것이다.

In 2016, an earthquake occurred at Gyeongju, Korea. At the Wolsong site, the observed peak ground acceleration was lower than the operating basis earthquake (OBE) level of Wolsong nuclear power plant. However, the measured spectral acceleration value exceeded the spectral acceleration of the operating-basis earthquake (OBE) level in some sections of the response spectrum, resulting in a manual shutdown of the nuclear power plant. Analysis of the response spectra shape of the Gyeongju earthquake motion showed that the high-frequency components are stronger than the response spectra shape used in nuclear power plant design. Therefore, the seismic performance evaluation of structures and equipment of nuclear power plants should be made to reflect the characteristics of site-specific earthquakes. In general, the floor response spectrum shape at the installation site or the generalized response spectrum shape is used for the seismic performance evaluation of structures and equipment. In this study, a generalized response spectrum shape is proposed for seismic performance evaluation of structures and equipment for nuclear power plants. The proposed response spectrum shape reflects the characteristics of earthquake motion in Korea through earthquake hazard analysis, and it can be applied to structures and equipment at various locations.

Recently, the occurrence frequency of earthquake has increased in Korea, and many cultural assets have been damaged. Cheomseongdae is a valuable cultural assets that must be preserved historically and culturally. But, the masonry structure such as Chemseongdae is vulnerable to lateral forces. Therefore, in this study, structural modeling and dynamic analysis are performed to reflect the ground state and structural form of Cheomseongdae. Also, discrete element analysis technique is applied and dynamic behavior characteristics are analyzed according to earthquake load. For this purpose, displacements and stresses according to locations are reviewed and then swelling and distortion are analyzed.

The site coefficients in the common requirements for seismic design codes, which were promulgated in 2017, were reevaluated and the standard design spectrum for soil sites were newly proposed in order to ensure the consistency of the standard design spectra for rock and soil sites specified in the common requirements. Using the 55 ground motions from domestic and overseas intraplate earthquakes, which were used to derive the standard design spectrum for rock sites, as rock outcropping motions, site response analyses of Korean soil were performed and its ground-motion-amplification was characterized. Then, the site coefficients for soil sites were reevaluated. Compared with the existing site coefficients, the newly proposed short-period site coefficient Fa increased and the long-period site coefficient Fv decreased overall. A new standard design spectrum for soil sites was proposed using the reevaluated site coefficients. When compared with the existing design spectrum, it could be seen that the proposed site coefficients and the standard design spectrum for soil sites were reasonably derived. They reflected the short-period characteristics of earthquake and soil in Korea.

Pseudo-static approach has been conventionally applied for the design of gravity type quay walls. In this method, seismic coefficient (kh), expressed in terms of acceleration due to gravity, is used to convert the real dynamic behavior to an equivalent pseudo-static inertial force for seismic analysis and design. Therefore, the calculation of an appropriate kh considering frequency characteristics of input earthquake is critical for representing the real dynamic behavior. However, the definitions of kh, which is used for simplified analysis in Korea, focuses only on convenience that is easy to use, and the frequency characteristics of input earthquake are not reflected in the kh definitions. This paper evaluates the influences of the frequency characteristics of input earthquake on kh by initially reviewing the kh definitions in the existing codes of Japan for port structures and then by performing a series of dynamic centrifuge tests on caisson gravity quay walls of different earthquake input motions (Ofunato, Hachinohe). A review of the existing codes and guidelines has shown that the kh values are differently estimated according to the frequency characteristics of input earthquake. On the other hand, based on the centrifuge tests, it was found that the permanent displacements of wall are more induced when long-period-dominant earthquake is applied.

In order to modeling seismic isolation system such as lead-rubber bearing (LRB), bilinear model is widely used by many researchers. In general, an actual force-displacement relationship for LRB has a smooth hysteretic shape. So, Bouc-Wen model with smooth hysteretic shape represents more accurately actual hysteretic shape than bilinear model. In this study, seismic responses for seismically isolated nuclear power plant (NPP) with LRB modelled by Bouc-Wen and bilinear models are compared with those of NPP without seismic isolation system. To evaluate effect of earthquake characteristics for seismic responses of NPP isolated by LRB, 5 different site class earthquakes distinguished by Geomatrix 3rd Letter Site Classification and artificially generated earthquakes corresponding to standard design spectrum by Reg. Guide 1.60 are used as input earthquakes. From the seismic response results of seismically isolated NPP, it can be observed that maximum displacements of seismic isolation modelled by Bouc-Wen model are larger than those by bilinear model. Seismic responses of NPP with LRB is significantly reduced than those without LRB. This reduction effect for seismic responses of NPP subjected to Site A (rock) earthquakes is larger than that to Site E (soft soil) earthquakes.

According to natural frequency of soil, characteristics of earthquake responses of an isolated containment building in nuclear power plants are examined. For this, earthquake response analysis of seismically isolated containment buildings in nuclear power plants is carried out by strictly considering soil-structure interactions. The structure and near-field soil are modeled by the finite element method while far-field soil by consistent transmitting boundary. The equation of motion of a soil-structure interaction system under incident seismic wave is derived. The derived equations of motion are solved to carry out earthquake analysis of a seismically isolated soil-structure system. Generally, the results of this analysis show that seismic isolation significantly reduces the responses of the soil-structure system. However, if the natural frequency of the soil is similar to that of the soil-structure system, the responses of the containment buildings in nuclear power plants rather increases due to interactions in the system.

본 연구의 목적은 에너지 흡수형 강재 댐퍼를 이용하여 손상순서를 제어함으로써 주구조체를 재사용 할 수 있는 철골조시스템을 개발하고, 지진응답특성을 파악하는 것이다. 이를 위하여 강재 댐퍼의 형상을 제안하고, 제안된 강재 댐퍼의 변형 형상과 응력 분포를 알아보기 위하여 범용 유한요소해석 프로그램인 ANSYS(ver.10.0)을 이용한 비선형 유한요소해석을 수행하였다. 또한 지진응답특성을 파악하기 위하여 실대형 사이즈 5.4m×2.4m의 1층 철골조 실험체 4개를 설계 및 제작하여 유사동적 지진응답실험을 수행하였다. 본 연구에서 제안하는 강재 댐퍼를 제진요소로 사용하는 경우, 주구조체에 비하여 높은 강성을 갖는 댐퍼가 소폭의 변위에 먼저 소성화함으로써 이력에 의한 지진에너지를 흡수할 수 있으며, 지진응답에서 유리한 것이 판명되었다.

응답스펙트럼은 내진설계에 있어서 중요한 기초자료의 하나이다. 응답스펙트럼을 얻기 위하여, 한반도에서 발생하는 지진들의 지진원 특성에 근거하여 다수의 강진동을 Boore(2005)에 의해 개발된 컴퓨터 프로그램 SMSIM을 사용하여 모사하였다. 여러 연구결과들에 대한 충분한 검토를 통하여, 모사에 필요한 입력자료들을 선정하였다. 모사된 강진동으로부터 얻은 응답스펙트럼은 가속도 1.0 g에 대하여 정규화하여 미국 원자력위원회(1973)의 표준응답스펙트럼과 비교하였다. 이 연구에서 얻어진 응답스펙트럼의 스펙트럼 진폭은 대략 10 Hz 이상의 고주파 대역에서 표준 응답스펙트럼 값에 비하여 큰 것으로 나타났다. 또한 응력강하량의 변화에 따른 응답스펙트럼의 변화를 평가하였다. 그 결과 큰 응력강하량에 대한 응답스펙트럼의 스펙트럼 진폭은 저주파 범위내에서 큰 값을 나타냄을 제시하였다.

공간구조물의 성능기초 내진설계를 위한 기초연구의 하나로 강구조 골조막 구조의 탄소성 지진응답 특성을 분석하였다. 하부 골조의 가새의 선행좌굴을 유도하여 상부에의 지진 에너지 전달을 저감할 수 있음을 보여주고 있다.

Seismic control performance of MR dampers, which have severe nonlinearity, is different with respect to the dynamic characteristics of earthquake excitations such as magnitude and frequency contents. In this study, effects of excitation characteristics on the equivalent linear system represented by an equivalent damping ratio for single-degree-of-freedom (SDOF) systems with a MR damper are investigated through numerical analysis for various natural frequencies of the structures and design parameters of the MR damper. In addition, to implement the an equivalent linearization procedure considering non-stationarity and frequency contents of the earthquake excitation, seismic response reduction factors for artificial earthquake ground motions are proposed using regression analysis of the linear structural responses. Analysis results show that the relative magnitude of the excitation compared to the friction force of the MR damper and frequency contents of the excitation affect the equivalent damping ratio considerably, and appropriate combination of friction and damping produces additional damping effect

2005년 3월 20일 발생한 Fukuoka 지진 시 국내 및 일본에서 관측된 자료를 이용하여 지반운동 감쇄특성을 분석하였다. 또한 최근 국내 및 일본에서 제시된 지반운동 거리감쇄식을 이용한 예측값과의 비교를 통하여 국내 강지진동 예측 시 일본에서 개발된 감쇄식의 적용가능성을 평가하였다. 그 결과 동일 거리에 위치한 국내 및 일본 관측소에서 측정한 기록이 비교적 유사하게 나타났으며 국내 및 일본에서 제시된 지반운동 거리감쇄식의 예측값이 매우 유사하게 나타나 국내에서의 강지진동 예측 시 일본에서 제시된 지반운동 감쇄식을 200km 이상의 비교적 원거리에 대한 국내 감쇄식의 평가 등에 유용하게 활용할 수 있는 것으로 나타났다.

본 논문에서는 국내 148개 지반에 대한 전단파속도 주상도, 기반암 깊이 및 지반의 동적변형특성을 획득하여 미국 서부해안지역의 지반특성과 비교하였고, 등가선형해석을 수행하였다. 해석은 1등급 붕괴방지수준인 0.154g를 암반노두에 적용하여 수행하였다. 해석결과 국내 지반특성에 적합한 증폭계수 F_a와 F_v는 UBC 기준의 증폭계수와 매우 다른 경향을 보였다. 단주기 증폭계수 F_a의 경우 UBC 기준보다는 큰 값이 얻어졌고, 장주기 증폭계수 F_v는 UBC 기준보다 작은 값으로 나타났다. 따라서, 국내 지반특성을 적절히 반영할 수 있는 설계지반운동 결정방법을 개선해야할 필요를 확인하였다.

해일지진 및 해일유발지진의 특성을 기존의 연구결과인 규모, 모멘트, 에너지 그리고 단층의 길이 등의 자료를 이용하여 응력강하량 및 지체구조 관점에서 분석을 하였다. 해일지진(Tsunami Earthquake)은 일반 지진이나 해일유발지진(Tsunamigenic Earthquake)보다는 약 10bar 정도의 매우 낮은 응력강하량을 가지며 에너지/모멘트 비가 매우 작으며 주로 해구의 매우 낮은 경사의 스러스트 단층에서 발생하는 것으로 분석이 된다. 한편 동해에서 해일을 유발한 지진들은 약30∼50bar의 응력강하량로서 에너지/모멘트비가 세계평균과 비슷한 스러스트 단층에서 발생하는 것으로 유추된다. 따라서 응력강하, 에너지/모멘트 비, 그리고 스러스트 단층의 경사각은 지진해일 발생특성을 나타내는 인자로 대표될 수 있다.