Several water tanks installed in the building were damaged during the Gyeongju earthquake (2016) and the Pohang earthquake (2017). Since a water tank for fire protection is very important component, seismic safety should be ensured. In this study, an interaction between a water tank and a building was studied by the dynamic analysis of the RC building with the water tank. In case the water tank was installed on the roof of the RC building, it was confirmed that it did not significantly affect the response of the building. Based on the result, dynamic response characteristics of the water tank in the building were studied using two SDOF models represented dynamic behavior of the water tanks under earthquake. An earthquake time-history analysis was carried out with variables of aspect ratio of the tank, story of the building, and installed location in the building using three kinds of earthquakes.

In this study, a design procedure for the practical application of the dampers to building structures under earthquake loads was presented by using earthquake response spectrum. Nonlinear time history results using a 10 story building structure installed with damper verified the effectiveness of the proposed procedure by showing that the structural response could be reduced to the target performance level for seismic loads. Since the proposed design procedures are based on response spectrum seismic analysis result of the original structure, the capacity, location and the number of damper and the consequent response reduction effects can be preliminarily determined without performing the nonlinear time history analysis.

The site coefficients in the common requirements for seismic design codes, which were promulgated in 2017, were reevaluated and the standard design spectrum for soil sites were newly proposed in order to ensure the consistency of the standard design spectra for rock and soil sites specified in the common requirements. Using the 55 ground motions from domestic and overseas intraplate earthquakes, which were used to derive the standard design spectrum for rock sites, as rock outcropping motions, site response analyses of Korean soil were performed and its ground-motion-amplification was characterized. Then, the site coefficients for soil sites were reevaluated. Compared with the existing site coefficients, the newly proposed short-period site coefficient Fa increased and the long-period site coefficient Fv decreased overall. A new standard design spectrum for soil sites was proposed using the reevaluated site coefficients. When compared with the existing design spectrum, it could be seen that the proposed site coefficients and the standard design spectrum for soil sites were reasonably derived. They reflected the short-period characteristics of earthquake and soil in Korea.

On November 15, 2017, Pohang earthquake occurred. Its local magnitude was announced to be ML=5.4 by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA stations were obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectra were defined as GMRotI50 spectra. From the statistical analysis of the GMRotI50 spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum were obtained. These results were compared with the Korean standard design spectra, which were developed from domestic and overseas intra-plate earthquake records, and Gyeongju earthquake response spectra. The response spectra of Pohang earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

On September 12, 2016, Gyeongju earthquake occurred. Its local magnitude was announced to be ML=5.8 by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA, EMC and KERC stations was obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectrum was defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum was obtained. These results were compared with the Korean standard design spectra, which were developed from domestic and overseas intraplate earthquake records. The response spectra of Gyeongju earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

In this study, to estimate the combination of earthquake magnitude (Mw) and distance (R) corresponding to the design spectrum defined in Korean Building Code (KBC) 2016, the response spectra predicted from the attenuation relationships with the variation of Mw (5.0~7.0) and R (10~30km) are compared with the design spectrum in KBC 2016. Four attenuation relationships, which were developed based on local site characteristics and seismological parameters in Southern Korea and Eastern North America (ENA), are used. As a result, the scenario ground motions represented by the combinations of Mw and R corresponding to the design spectrum for Seoul defined in KBC 2016 are estimated as (1) when R =10 km, Mw = 6.2~6.7; (2) when R = 15 km, Mw = 6.5~6.9; and (3) when R = 20 km, Mw = 6.7~7.1.

The vertical design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. From the statistical analysis of the vertical response spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement. The ratio of vertical to horizontal response spectrum for each record is calculated. Statistical analysis of the ratios rendered the vertical to horizontal ratio (V/H ratio). Subsequently the ratio between the peak vertical ground acceleration to the horizontal one is obtained.

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

In the Korean Building Code (KBC), the Design Eccentricity involves the torsional amplification factor (TAF), and the inherent and accidental eccentricities. When a structure of less than 6-stories and assigned to seismic design category C or D is designed using equivalent static analysis method, both KBC-2006 and KBC-2009 use the TAF but apply different calculation methods for the of design eccentricity. The design eccentricity in KBC-2006 is calculated by multiplying the sum of inherent eccentricity and accidental eccentricity at each level by a TAF but that in KBC-2009 is calculated by multiplying only the accidental eccentricity by a TAF. In this paper, the damage indices of a building with planar structural irregularity designed by different design eccentricities are compared and the relationship between the earthquake damage and design eccentricity of the building is evaluated. On the basis of this study, the increment of design eccentricity results in the decrement of final eccentricity and global damage index of structure. It is observed that design eccentricity in KBC-2006 reduces the vulnerability of torsional irregular building compared to design eccentricity in KBC-2009.

일반교량은 상부구조, 연결부분, 하부구조 및 기초로 구성되어 있고 내진성능은 하부구조와 연결부분의 파괴메카니즘에 의해 결정된다. 그러므로 내진설계는 구조부재의 설계강도, 즉 설계단면을 결정하는 기본설계단계에서 수행되어야 한다. 도로교설계기준 내진설계편은 두 가지 기본설계 방식을 제시하고 있다. 첫째는 기존 설계방식으로 내진설계편이 제시한 응답 수정계수를 적용하는 방식이고 둘째는 새로 도입된 연성도 내진설계 방식으로 설계자가 응답수정계수를 결정하는 방식이다. 이 연구에서는 일반교량을 대상으로 두 설계방식을 같이 적용하는 기본설계를 수행하고 내진성능 확보의 관점에서 요구되는 보완사항을 제시하였다.

본 연구의 목적은 지진모의실험을 위한 1:5 축소 10층 R.C. 공동주택 모델의 제작과정을 통하여, 실험체의 효율적인 설계 및 제작 과정을 개발하는 것이다. 실험체의 축소율은 가용한 진동대의 크기(5m{\times}5m)와 최대 허용무게(600kN)및 모델 철근(D3 볼트, {\phi}2 강선)의 경제성과 상용성을 고려하여 결정하였다. 모델 철근은 현장에 바로 설치하기 어렵기 때문에 철망을 제작한 후 현장에서 조립하였다. 벽체와 슬래브를 동시에 타설할 경우 거푸집의 탈형이 매우 어렵기 때문에, 벽체를 먼저 타설하고 양생 후 탈형한 뒤 슬래브 거푸집을 설치하였다. 벽체 거푸집은 반복 사용이 가능한 Slip form 형태로 한쪽은 합판, 다른 한쪽은 아크릴로 제작하여 타설시 밀실도를 확인할 수 있도록 하였다. 1:5 축소 10층 R.C. 공동주택모델을 제작하기 위해 총 제작 기간은 약 6개월이 소요되었으며, 전임 연구원 5명, 작업보조원 612명 일의 인원이 투입되었다.

본 연구는 인공지진파 및 기록 지진파를 이용하여, KBC2009 규준으로 설계된 강구조 건물의 거대 건물에 대한 내 력 여유도를 평가하는 것을 목표로 하고 있다. 이 논문에서는 검정에 있어서 콘크리트 슬래브로 층강성이 고정되어 있는 2-D 프레임을 고려하였고, 각각의 프레임을 구성하고 있는 보와 기둥 부재는 각 부재단에 소성힌지를 적용하 였다. 검정에 사용한 해석법은 응답 스펙트럼을 이용한 모드 해석과 기록 및 인공지진파를 이용한 시간이력해석을 선택하여 모델의 거동을 조사하였으며 해석에서는 P-delta 효과를 고려한다.

안전한 내진설계를 위해서는 각 부재에 요구되는 소성변형 요구량을 정확히 예측하여야 한다. 본 연구에서는 등가정적내진설계에 쉽게 활용할 수 있도록, 복잡한 비선형해석 없이 탄성해석을 사용하여 모멘트골조 부재의 소성변형을 평가하는 방법을 개발하였다. 각 부재의 소성변형은 부재 강성과 탄성해석 결과로부터 직접 결정되는 층간변위비 요구량 및 모멘트 재분배 등의 설계 변수로부터 결정된다. 제안된 방법을 8층 2경간의 모멘트골조에 적용하고, 비선형해석을 통하여 제안된 방법의 정확성을 검증하였다. 검증결과, 제안된 방법은 비선형거동에 의한 층간변위비 요구량과 각 부재의 소성변형 요구량을 정확히 평가하였다. 제안된 방법은 부재연성설계와 같은 신축건물의 내진설계에 활용할 수 있을 뿐만 아니라 기존건물의 내진성능평가에도 활용될 수 있을 것으로 기대된다.

안전하고 경제적인 내진설계를 위해서는 설계 초기단계부터 모멘트재분배와 부재소성변형을 고려하는 것이 바람직하다. 본 연구에서는 할선강성해석을 사용하여 각 부재의 재분배된 모멘트와 소성변형을 직접적으로 고려할 수 있는 내진설계방법을 개발하였다. 모멘트재분배에 의하여 발생된 비대칭 부재강성을 나타내기 위하여, 비강접 단부접합부를 갖는 보-기둥요소(NREC요소)를 사용하여 구조물을 모델링하였다. NREC요소에 사용되는 할선강성은 건물 및 부재의 요구연성도에 기반하여 결정하였다. 할선강성 구조모델에 대한 선형해석을 수행하여 내진설계를 위한 부재력과 소성변형을 구하였다. 본 연구에서는 할선강성해석을 모멘트골조와 이중골조의 내진설계에 적용하였고, 설계결과를 정밀한 비선형해석 결과와 비교하였다.

Earthquake is one of the hazard so hard to provide because it is difficult predicted occurred time, scale and characters. Neighbors which have damaged by earthquake look out for statement of damage, It is bigger than nation which has not prepared seismic code at ordinary time seismic damage which belong to loss of life. The earthquake in Kobe, Japan showed that the damages were concentrated on the buildings which were not considered to be protected from the earthquakes. Seismic code applied structures was small damaged but non applied structures was much damaged such as collapse and loss of life. In this study, apartment structures in Korea analyze about earthquake hazard and evaluate seismic performance. Through the this study we have notice of earthquake hazard for apartment structures which live a lot of population of Korea and suppose necessary for seismic retrofit.

This paper describes the state-of-the art research activities on seismic isolation systems for improving the seismic capacities of the bridges in Korea. Though Korea is located in a region of low-to-moderate seismicity, the construction of seismic isolation systems has increased rapidly. The application of seismic isolation system has become popular worldwide because of its stable behavior and economical construction especially for bridge structures. Since optimal reliability level of isolated bridges can be determined as the one that provides the highest net life-cycle benefit to society, or the minimum Life-Cycle Cost (LCC), an optimal design procedure based on minimum LCC concept is more expedient for the design of seismically isolated bridges in areas of low-to-moderate seismicty. To verify the adequacy of the new design concept based on the LCC minimization, experimental studies on seismically isolated bridge are introduced as well, which include pseudo-dynamic test of scaled pier and dynamic field test of full-scale. With the application of seismic isolation systems, many kinds of dampers to improve the seismic capacity of structure are also applied not only to new bridges but also to existing bridges.

공간구조물의 성능기초 내진설계를 위한 기초연구의 하나로 강구조 골조막 구조의 탄소성 지진응답 특성을 분석하였다. 하부 골조의 가새의 선행좌굴을 유도하여 상부에의 지진 에너지 전달을 저감할 수 있음을 보여주고 있다.

강제 진동 실험은 구조물의 수학적 모델과 실제 모델의 상관관계를 입증하여 구조물의 성능을 정확히 평가하기 위해 중요하기 때문에, 동적 및 정적 가진 실험을 통해 구조물의 내진성능을 평가하는 다양한 기법이 사용되고 있다. 본 논문에서는 복합 질량형 감쇠기(Hybrid Mass Damper, HMD)를 이용하여 지진하중을 모사하는 실물크기 철골조 구조물의 강제진동실험이 수행되었다. ANSYS를 사용하여 구조물의 유한요소 해석모델을 구축하였고, 강제진동 실험을 통해 얻은 계측데이터를 사용하여 이 해석모델을 갱신하였다. 의사 지진 가진 실험은 HMD에 의해 유도된 층응답이 실험을 통해 갱신된 유한요소모델을 사용한 수치해석 응답과 일치함을 보여준다.

건축구조물의 비선형 지진응답해석에서 입력지진동은 구조물의 탄소성 지진응답을 좌우하는 중요한 요소이다. 지진동파형은 지진발생과 전파경로에 따른 여러 가지 인자에 의해 그 특성이 결정되기 때문에 구조물의 지진응답해석에서 일반성을 갖는 입력지진동을 선정하는 것은 매우 어려운 문제이다. 본 논문은 내진설계용 스펙트럼에 대응하는 인공지진동파형을 작성한 후, 작성된 인공지진동에 대한 탄소성 응답스펙트럼 특성을 분석한 것이다. 여기서 작성된 인공지진동파형은 과거의 지진에서 얻어진 기록지진동파형을 이용하여 기록지진동과 동일한 위상각을 가지며, 감쇠정수 h=5%일 때의 내진설계용 스펙트럼과 거의 일치하도록 작성되었다. 작성된 인공지진동은 원 기록지진동과 동일한 위상각을 가지며, 주기 T=0.02{\sim}10.0sec 범위에서 설계용 스펙트럼과 매우 근접하게 작성되었다. 인공지진동을 입력한 1자유도계의 탄성 및 탄소성 지진응답해석을 수행하여 탄소성 응답스펙트럼 및 탄소성 응답특성을 분석하였다. 본 논문에서 작성된 인공지진동은 건축구조물의 탄소성 지진응답해석용 입력지진동으로 충분히 타당성이 있다고 사료된다.