With rapid urbanization, the importance of urban warfare is increasing, and it is also required to reflect the characteristics of cities in wargame models. However, in the military's wargame models, the urbanization factor was calculated and used without theoretical basis. In this study, we investigate techniques for estimating the urbanization factor using Fractal dimension theory. The urbanization factor we propose can suggest a logical and valid representative value when used in conjunction with Agent Based Model and other methodologies.

The plant-specific NAC transcription factors control various biological processes, including plant development and stress responses. We have isolated an ANAC032 gene, one of the NAC transcription factor family, which was highly activated by multi-abiotic stresses, including high salt and drought in Arabidopsis. Here, we generated transgenic plants constitutively expressing ANAC032 and its knockout to identify the functional roles of ANAC032 in Arabidopsis under abiotic stress responses. The ANAC032-overexpressing plants showed enhanced tolerance to salinity and drought stresses. The anac032 knockout mutants were observed no significant changes under the high salt and drought conditions. We also monitored the expression of high salt and drought stress-responsive genes in the ANAC032 transgenic plants and anac032 mutant. The ANAC032 overexpression upregulated the expression of stress-responsive genes, RD29A and ERD10, under the stresses. Thus, our data identify that transcription factor ANAC032 plays as an enhancer for salinity and drought tolerance through the upregulation of stress-responsive genes and provides useful genetic traits for generating multi-abiotic stress-tolerant forage crops.

확산강조 자기공명영상은 초급성기 뇌경색 진단과 뇌종양 진단 및 치료에 매우 유용하지만 뇌줄기 주변에 자화 감수성 인공물이 자주 발생하고 있어 이를 최소화하려는 노력이 필요하다. 확산강조영상은 에코평면영상(echo planar image)을 사용하고 서로 다른 자화 감수성을 가진 구조물들이 인접한 경계면에서 영상의 왜곡을 나타낸다. SENSE(sensitivity encoding) 기법은 자화 감수성 인공물을 감소시킬 수 있다. 본 연구는 뇌 줄기의 해부구조를 모방한 팬텀을 만들어서 확산 강조영상 시 자화 감수성 인공물을 감소시키는 최적의 SENSE 인자(factor)를 알아보았다. 산출된 최적의 SENSE 인자와 현재 임상 값으로 만든 영상을 비교 분석하고, 통계적 유의성을 검증하여 유용성을 알아보았다. 팬텀 실험 결과 SENSE 인자의 크기가 증가할수록 자화 감수성 인공물은 감소하였다. SENSE 인자 2.5, 3.0, 3.5, 4.0을 적용한 영상은 기준 영상 과 같은 크기의 왜곡이 발생하였다. 산출된 SENSE 인자 2.5의 실험군과 1.5을 적용한 대조군 각각 40명의 영상을 비교 분석하였다. SENSE 인자 1.5를 적용한 대조군은 SENSE 인자 2.5를 적용한 실험군에 비해서 자화 감수성 인공물이 더 크게 발생하였고, 통계적으로 유의하게 나타났다. 본 연구를 통해서 뇌 확산강조영상 획득 시 SENSE 인자 2.5를 적용한다 면 진단적으로 더욱 가치가 있는 영상을 얻을 수 있을 것으로 사료된다.

우리나라는 삼면이 바다이며 북쪽과 동쪽으로 산지가 위치하고 서쪽으로는 평탄한 지리적 특성을 가진다. 또한 계절풍, 태풍 등의 바람이 지리적 특성으로 인하여 지역마다 풍향별 풍속이 다르다. 그러나 건축구조기준(이하 KDS 41 12 00: 2019)은 전풍향에 대 해 동일한 풍속을 적용한다고 규정하였고, 이것은 상대적으로 약한 풍향에 대해 과다한 풍속을 적용할 수 있다. 이런 점을 고려하여 건 축구조기준(이하 KDS 41 12 00: 2022)에서는 합리적인 설계를 위해 풍향계수를 적용한다. 본 연구는 8개소를 대상으로 10년간의 자 료를 수집하여 사용성 평가를 위한 1년 재현기대풍속과 풍향계수를 산출하였다. 선행 연구된 논문에서 사용성 평가를 위한 1년 재현 기대풍속과 풍향계수를 산출하였으나, 이는 기상청에서 제공하는 일최대풍속으로 산출하였기 때문에 누락되는 풍속이 있을 수 있다고 판단되었다. 따라서 분풍속을 이용하여 모든 풍향의 일최대풍속을 구하였고, Weibull 분포를 통해 재현기대풍속을 산출하였다. 최종적 으로 기상청에서 제공하는 일최대풍속으로 구한 풍향계수와 분풍속으로 구한 일최대풍속의 풍향계수를 비교하여 지역별 풍향계수의 경향 및 두 방법의 차이점에 대해 분석하였다.

In Korea, most nuclear power plants were designed based on the design response spectrum of Regulatory Guide 1.60 of the NRC. However, in the case of earthquakes occurring in the country, the characteristics of seismic motions in Korea and the design response spectrum differed. The seismic motion in Korea had a higher spectral acceleration in the high-frequency range compared to the design response spectrum. The seismic capacity may be reduced when evaluating the seismic performance of the equipment with high-frequency earthquakes compared with what is evaluated by the design response spectrum for the equipment with a high natural frequency. Therefore, EPRI proposed the inelastic energy absorption factor for the equipment anchorage. In this study, the seismic performance of welding anchorage was evaluated by considering domestic seismic characteristics and EPRI's inelastic energy absorption factor. In order to reflect the characteristics of domestic earthquakes, the uniform hazard response spectrum (UHRS) of Uljin was used. Moreover, the seismic performance of the equipment was evaluated with a design response spectrum of R.G.1.60 and a uniform hazard response spectrum (UHRS) as seismic inputs. As a result, it was confirmed that the seismic performance of the weld anchorage could be increased when the inelastic energy absorption factor is used. Also, a comparative analysis was performed on the seismic capacity of the anchorage of equipment by the welding and the extended bolt.

The cellular communication network factor (CCN) family proteins regulate many biological events such as angiogenesis, tumor growth, placentation, implantation, and embryogenesis. The expression and function of CCN1, CCN2, and CCN3 at the maternal-conceptus interface are established in humans and rodents, but little is known about the role of CCN4 to CCN6 in the reproductive organs in any other species. Several studies in transcriptome analysis in pigs have shown that the expression of CCN4 and CCN6 increases in the endometrium during early pregnancy. However, their expression, regulation, and function in the endometrium throughout the estrous cycle and pregnancy have not been fully understood in pigs. Thus, we determined the expression, localization, and regulation of CCN4 and CCN6 during the estrous cycle and at the maternal-conceptus interface in pigs. We found that the levels of CCN4, but not CCN6, changed during the estrous cycle. The levels of CCN4 were greater during mid- to late pregnancy than in the early stage, and the levels of CCN6 were greatest on Day 15 of pregnancy. CCN4 and CCN6 were detected in conceptus tissues during early pregnancy and in chorioallantoic tissues during the later stage of pregnancy. CCN4 mRNA was mainly localized to epithelial cells, CCN6 mRNAs to epithelial and stromal cells in the endometrium. In endometrial explant cultures, CCN4 expression was increased by progesterone, and CCN6 expression by interferon-γ. These results suggest that CCN4 and CCN6 may play roles in the establishment and maintenance of pregnancy by regulating the endometrial epithelial cell functions in pigs.

3D modeling is a technology for representing real objects in a virtual 3D space or modeling and reproducing the physical environment. 2D drawings for viewing the existing building structure have limitations that make it difficult to understand the structure. By implementing this 3D modeling, specific visualization became possible. 3D technology is being applied in a wide range of preevaluation work required for nuclear decommissioning. In Slovakia, 3D modeling was applied to determine the optimal cutting strategy for the primary circuit before dismantling the VVER type Bohunice V1. In Japan, the Decommissioning Engineering Support System (DEXUS) program has been developed that incorporates VRDose, a decommissioning engineering support system based on 3D CAD models. Through this, the cutting length of the work object and the quantity of containers for packaging waste are calculated, exposure dose calculations in various dismantling scenarios, and cost estimation are performed. Korea also used 3D technology to evaluate the decommissioning waste volume for Kori Unit 1 and to evaluate the optimal scenario of the decommissioning process procedure for the research reactor Unit 1. 3D technology is currently being used in various pre-decommissioning evaluations for VVER, PWR, and research reactors. Overseas, a program that matches various decommissioning pre-evaluation tasks with cost estimation has also been developed. However, most 3D technologies are mainly used as a support system for dose evaluation and amount of decommissioning waste calculation. In this study, 3D modeling was performed on the PHWR structure, and physical and radiological information about the structure was provided. The information on the structure can present the unit cost for the work object by confirming the standard of the applied unit cost factor (UCF). The UCF presents the unit cost for repeated decommissioning operations. The decommissioning cost of the work object can be obtained by multiplying the UCF by the number of repetitions of the work. If the results of this study are combined with the process evaluation and waste quantity estimation performed in previous studies, it is judged that it will be helpful in developing an integrated NPP decommissioning program that requires preliminary evaluation of various tasks. In addition, it is judged that a clear cost estimation of the object to be evaluated will be possible by matching the 3D work object with the UCF.

For safeguarding dry storage facilities, a tomography system based on fast and thermal neutron detection was studied in Korea Institute of Nuclear Nonproliferation and Control. The study was conducted laboratory-scale experiments based on a custom built 1/10th scale model cask, He-4 gas scintillation detector array, and multiple 252Cf sources. A filtered back projection (FBP) was utilized to obtain the cask image via MATLAB. The Ram-Lak filter (ramp filter) was employed in FBP for improved the reconstructed image quality. The Ram-Lak filter is the increasing amplitude filter due to the increasing spatial frequency of the image. In spatial frequency, the frequency of brightness change in the low-frequency region is relatively low, and the frequency of brightness change in the highfrequency region is large. Thus, the high-frequency region in the neutron tomographic image is near the neutron sources and the cask, and the low-frequency region is outside of the cask and/or between the source and cask in the study. In order to apply the ramp filter, a Fourier transform is initially performed on projection data, and image reconstruction is performed with the corrected projection data. In this case, the filter is linearly changed. Therefore, a small filter value is applied at lower spatial frequencies to reduce the projection data, and a large filter value is applied at high spatial frequencies to reduce the projection data. The filter scale is a fraction of frequency amplitude, and the filter value applied to the projection data is determined according to the filter scale. This study was conducted for discussion of the image quality due to the effect of the filter scale used for image reconstruction of a neutron tomography system. The results show that in the experiment with one source, the source location was founded when we used the frequency scale of 0.5 and over. In the double or triple source experiment, the source locations and relative activities were found when we used a filter scale of 0.4 to 0.6. When the filter frequency scale of 0.7 to over, the relative activities are hard to know. It can be found that if the filter value is too large or too small, distortion may occur in the reconstruction results. Therefore, it seems reasonable to set a value between 0.4 and 0.6 as the scaling factor for the neutron tomography system. In the future, additional comparative studies will perform validation of the frequency scaling methods.

The risk of various hazardous substances in aquatic environment comprises not only the concentration of substances in the environmental medium but also their accumulation in fish through complex food web and the health risks to humans through the fish. In Korea, the monitoring of residual toxicant in aquatic ecosystems began in 2016 following the enforcement of the Acts on registration and evaluation for the management of chemicals used in daily life (consumer chemical products), and attention has been paid to potentially hazardous substances attributed to them. Recently, studies have been carried out to investigate the distribution of these hazardous substances in the ecosystem and calculate their emission factors. These include the accumulation and transport of substances, such as detergents, dyes, fragrances, cosmetics, and disinfectants, within trophic levels. This study summarizes the results of recently published research on the inflow and distribution of hazardous substances from consumer chemical products to the aquatic environment and presents the scientific implication. Based on studies on aquatic environment monitoring techniques, this study suggests research directions for monitoring the residual concentration and distribution of harmful chemical substances in aquatic ecosystems. In particular, this study introduces the directions for research on trophic position analysis using compound specific isotope analysis and trophic magnification factors, which are needed to fulfill the contemporary requirements of selecting target fish based on the survey of major fish that inhabit domestic waters and assessment of associated health risk. In addition, this study provides suggestions for future biota monitoring and chemical research in Korea.

병렬영상기법인 SENSE 기법은 슬관절 자기공명영상의 검사 시간을 획기적으로 단축할 수 있다. 그러나 기법 적용 시 SENSE factor를 증가시키면 영상에 인공물의 발생이 증가하는 문제점이 있어 개선을 위해 본 연구에서는 최소의 시간이 소요되면서 인공물이 발생하지 않는 최적의 SENSE factor를 제시하고자 하였다. 연구 방법은 SENSE factor 1.0을 기준 으로 0.5 간격씩 5.0까지 변화시켜 팬텀 실험과 임상실험을 시행하였다. 3.0T 초전도 자기공명영상장치와 dS Knee 코일 을 사용하여 T1, T2 강조영상을 획득하였으며, 영상의 비교평가는 임상 경력 10년 이상의 방사선사 10명이 5점 척도로 평가한 후, 일원배치 분산분석과 사후분석을 통해 유의한 차이가 있는지 판단하였다. 연구 결과 팬텀 실험은 T1, T2 강조 영상 모두 SENSE factor를 1.5 이하로 하였을 때 기준 영상과 차이가 없었으며, 임상실험은 SENSE factor를 2.0 이하로 하였을 때 기준 영상과 차이가 없었다. 결론적으로 슬관절 자기공명영상 시 검사 시간을 단축하면서 인공물이 발생하지 않는 최적의 SENSE factor는 팬텀 실험의 경우 1.5, 임상실험의 경우 2.0이 적정하리라 사료된다.

RADTRAN is a code that assesses the radiation risk of radioactive material transportation. RADTRAN assumes that the package is a point source or a line source regardless of package type and corrects the external dose rate using a shape factor which depends on the critical dimension of the package. However, the external dose rate calculated using a shape factor may be different from the actual external dose rate. Therefore, it is necessary to analyze the effect of the shape factor on the external dose rate. In this study, the effect of the shape factor on the external dose rate in RADTRAN was analyzed by comparison with MCNP. This study analyzed change in external dose rate depending on the distance from the package and the critical dimension. The distance from the package was in the range of 1–800 m. The shape of the package was assumed to be cylindrical with a radius of 1 m, and the critical dimensions of the package were assumed to be 2, 4, and 8 m. Attenuation and build-up in the air were not considered to consider only the effect on the shape factor. When simulating the exposure situation using MCNP, the package was assumed to be a volume source, and flux by distance from the package was calculated using F5 tally. The dose rate at 1 m from the package was normalized to 2 mSv·hr−1. As a result of the analysis, the external dose rates of the package were higher in RADTRAN than in MCNP. For the critical dimension of 2, 4, and 8 m, when the distance from package is 1–10 m, the RADTRAN was 1.83, 4.08, and 5.27 times higher on average than MCNP, respectively. And when the distance from the package was 10–100 m and 100–800 m, RADTRAN was 1.10, 2.02, 3.01 times and 1.04, 1.92, 2.43 times higher than MCNP, respectively. It was found that the larger the distance from the package is and the smaller the critical dimension of the package is, the less conservatively RADTRAN assessed. It is because the shape of the package gets closer to the point source as the distance from the package increases, and the shape factor decreases as the critical dimension of the package decreases. The result of this study can be used as the basis for radiation risk assessment when transporting radioactive materials.

For economic and safe management of Spent Nuclear Fuel (SNF), it is very important to maintain the structural integrity of SNF and to keep the fuel undamaged and handleable. The cladding surrounding nuclear fuel must be protected from physical and mechanical deterioration. The structural evaluation of SNF is very complicated and numerically demanding and it is essential to develop a simplified model for the fuel rod. In this study, a simplified model was developed using a new cladding failure criterion. The simplified model was developed considering only the horizontal or lateral static load utilizing the cladding material properties of irradiated Zirclaoy-4, and applicability in horizontal and vertical drop impacts was investigated. When a fuel rod is subject to bending, a very complicated 3D stress state is generated within the vicinity of the pellet–pellet interface. A very localized stress concentration is observed in the area where the edges of the pellets contact the cladding. If the failure strain criteria obtained from the uniaxial tension test or biaxial tube test is applied, failure is predicted at the beginning stage of loading with premature through-thickness stress or strain development. The localized contact stress or strain is self-limiting and is not a good candidate for the cladding failure criteria. In this work, a new cladding failure criterion is proposed, which can account for the localized stress concentration and the through-thickness stress development. The failure of the cladding is determined by the membrane plus bending stress generated through the thickness of the cladding, which can be calculated by a process called stress linearization along the stress classification line. The failure criterion for SNF was selected as the membrane plus bending stress through stress linearization in the cross-sections through the thickness of the cladding. Because the stress concentration in the cladding around the vicinity of the pellet–pellet interface cannot be simulated in a simplified beam model, a stress correction factor is derived through a comparison of the simplified model and detailed model. The applicability of the developed simplified model is checked through horizontal and vertical drop impact simulations. It is shown that the stress correction factor derived considering static bending loading can be effectively applied to the dynamic impact analyses in both horizontal and vertical orientations.

Periodontal disease is a chronic but treatable condition which often does not cause pain during the initial stages of the illness. Lack of awareness of symptoms can delay initiation of treatment and worsen health. The aim of this study was to develop and compare different risk prediction models for periodontal disease using machine learning algorithms. We obtained information on risk factors for periodontal disease from the Korea National Health and Nutrition Examination Survey (KNHANES) dataset. Principal component analysis and an auto-encoder were used to extract data on risk factors for periodontal disease. A synthetic minority oversampling technique algorithm was used to solve the problem of data imbalance. We used a combination of logistic regression analysis, support vector machine (SVM) learning, random forest, and AdaBoost to classify and compare risk prediction models for periodontal disease. In cases where we used principal component analysis (PCA) to extract risk factors, the recall was higher than the feature selection method in the logistic regression and support-vector machine learning models. AdaBoost’s recall was 0.98, showing the highest performance of both feature selection and PCA. The F1 score showed relatively high performance in Ada- Boost, logistic regression, and SVM learning models. By using the risk factors extracted from the research results and the predictive model based on machine learning, it will be able to help in the prevention and diagnosis of periodontal disease, and it will be used to study the relationship with various diseases related to periodontal disease.

This paper aims to propose a new systematic approach to analyze the factor productivity and to investigate those characteristics of factor productivity in operational and managerial perspectives. The Cobb-Douglas production function is adopted to estimate the labor and capital productivity. In estimating those productivities the data of The Research on the Actual Condition of Coastal Fisheries (RACF), especially those of Jeon-Nam Province are used. The statistical analysis of RACF data shows that the characteristics are a little bit different between labor and capital of the operational equipment in the coastal fisheries. The Cobb-Douglas type production function is useful in estimating the factor productivity, especially in case of ‘coastal Stow-net fishery’ even though the limited data is used. However, in case of ‘trap fishery,’ the Cobb-Douglas production function appears to have some limitations in estimation. This implies that estimating the factor productivities in fisheries employing broad perspectives and various methods are needed.

Application of the membrane process to wastewater treatment and reuse has been increasing due to water shortage, water pollution and an increase in water demand. Membrane fouling including biofouling should be controlled to extend its application. In this study, modulation of diffusible signal factor (DSF) system, the quorum sensing (QS) system that regulates EPS formation by microorganisms, was considered as a promising option to manage biofouling. Among many DSF compounds, cis -2-Decenoic acids (CDA) was selected. The experimental results showed that, as the CDA concentration increased, the density and number of stained cells decreased. The lowest density was observed when the CDA concentration of 300 nM was applied. The EPS on membrane surface decreased with increasing concentration of CDA. The CDA dosing also affected the EPS composition. At the 300 nM CDA dose, the total EPS reduced by up to 57% and the protein fraction by 35%. This study revealed the biofilm reduction effect of CDA under various conditions for MBR sludge. The application of CDA can be adapted to control biofouling in the MBR process.

본 연구는 MRCP 검사에서 대부분 시간이 소요되는 T2 3D 검사 시 CS 기법을 적용해 시간을 단축하고 동시에, CS 계수와 De-noising 계수를 변화시켜 그에 따른 영상 변화에 관하여 연구하고자 하였다. 본 연구는 환자 대신에 3D 프린터를 사용하였으며, 지름 0.55cm인 실리콘 bile duct를 제작하여 실험하였다. 실험 조건은 CS 계수를 1.1, 5, 10, 15, 20, 25로 변화시켰으며, 각각 변화된 CS 계수마다 De-noising 계수를 1, 100, 250, 500, 750, 1000으로 변화시켜 설정된 조건으로 5번씩 검사를 시행하고, 나머지 매개변수는 같게 하여 영상을 획득하였다. 계수 설정 별로 획득된 영상을 SNR, CNR, SSIM 값 순으로 측정하여 비교, 평가하였으며 검사 소요 시간의 변화도 측정하였다. 실험 결과 CS 계수를 기준으로 De-noising을 변화시킨 그룹과 De-noising 계수를 기준으로 CS 계수를 변화시킨 그룹에서 SNR과 CNR 전체적으로 유의하게 감소하였다(p<0.05). 또한, 검사 소요 시간은 CS 계수의 변화에 따라 많이 감소하였다. 특징적으로는 모든 계수 를 변화시킨 그룹에서 De-noising 계수 10, De-noising 계수 100의 그룹이 SNR과 CNR이 가장 높았으며, 구조적인 유사도를 측정하는 SSIM 값도 가장 높은 것으로 나타났다(p<0.05). 결론적으로, 환자의 호흡정지 기법이 가능한 CS 계수 15 이상에서 De-noising 10 또는 De-noising 100의 조합이 영상의 질과 검사 소요 시간에 있어 가장 최선의 계수 설정이며, 특히 CS 계수 20, De-noising 계수 100의 영상이 기준 영상 SNR의 90%, CNR의 97.2%, 구조적 유사성 98.7%로 가장 우수한 설정값으로 나타났다. 본 연구의 CS 계수와 De-noising 계수의 설정은 영상의 질적 수준을 일정 수준 유지하며, MRCP 검사에서 많은 시간이 소요되는 T2 3D sequence의 검사소요 시간을 단축시켜 진단적인 능력은 유지하며 검사 소요 시간을 줄이는 기초자료로 사용 될 것이라고 사료된다.

본 연구는 액티브 시니어 골프참여자를 대상으로 지각된 환경적요인과 주관적 건강 및 활동적 노화에는 어떠한 관계가 있는지 규명하는데 목적이 있다. 본 연구의 목적을 달성하기 위하여 SPSS(Statistical Package for the Social Sciences) 18.0과 AMOS(Analysis of Moment Structures) 18.0을 이용하여 빈도분석, 확인적 요인분석, 신뢰도분석과 상관관계분석을 실시하였고 모형을 설정한 뒤 구조방 적식모형(Structural Equation Modeling)을 통하여 변인 간의 인과적 관계를 규명하였다. 이상과 같은 연 구방법과 연구모형 검증을 기초로 하여 본 연구에서 도출된 결과는 다음과 같다. 첫째, 지각된 환경적요인 은 활동적 노화에 정적인 영향을 미치는 것으로 나타났다. 둘째, 활동적 노화는 주관적 건강에 정적인 영향 을 미치는 것으로 나타났다. 셋째, 지각된 환경적요인은 주관적 건강에 정적인 영향을 미치는 것으로 나타 났다. 넷째, 지각된 환경적요인과 주관적 건강의 관계에서 활동적 노화는 매개하는 것으로 나타났다.

In 1950-60s, anti-communism prevailed in Thailand. In order to effectively implement anti-communism, Thai government had anti-Chinese measures and censorship system. During that time, many Chinese Newspapers and publishers were forced to close , and some Sino-Thai writers were sent to prison. For continuing the development of Sino-Thai literature, writers had published works abroad, and Hong Kong was the main publishing place due to loose immigration policy and publishing conditions. Because of the British colonial policy and the Cold War structure, Hong Kong not only became a Chinese publishing base, but also a place of imagination for the West and consumer culture. This study tries to focus on three important and representative Sino-Thai novels, which were Chen Din’s Ladies of Sampeng Lane, Shih Qing’s Bo Zhe, and solitaire novel Feng Yu Yaowarat which were written by nine authors, discuss what kind of cultural conditions and resources does Hong Kong provide to Sino-Thai literature, and how does Sino-Thai novels respond to or imagine Hong Kong in their stories? This study regards Sino-Thai literature as a kind of Chinese literature (Hua-wen-wen-xue), which is different from the context of ‘pure Chinese’ and full of small and different Thai characteristics. Moreover, at the story level, these three novels reflect the rich faces of Sino-Thai communities, and at the publishing level, they represent the successful attempts of Sino-Thai literature to break through the predicament during the Cold War. 저