급속공사 현장에 사용되는 속경성 보수모르타르의 내구성능 증진을 위해 사용재료의 물리적 성능을 평가하였다. 이를 위해 염화물 확산 억제 성능을 보유한 페로니켈 수쇄슬래그 잔골재와 급결제, EVA계 폴리머를 모르타르에 치환시켜 급결성능과 기초적 성능을 평가하였다. 그 결과 FNS잔골재 및 RS잔골재 사용에 따른 압축강도, 휨강도, 부착강도가 증가되었다. 속경성 폴리머 모르타르의 염화물 이온 촉진시험의 결과 FNS를 50%이하 사용 시 재령 7일에서 재령 28일간 염화물 억제 성능이 유지되었으며, FNS잔골재 및 RS잔골재 사용에 따른 내구성 저하는 발견되지 않았으나, 건축 및 토목용 대체골재로 사용하는데 경제성 및 장기 내구성에 대한 추가 검토가 필요할 것으로 판단된다.

This study evaluated the fluidity and compressive strength of concrete by replacement ratio of blast furnace slag fine aggregate and ferronickel slag fine aggregate to investigate the possibility of replacing natural fine aggregate with steel slag for fine aggregate. Test results show that the use of steel slag fine aggregate improves the fluidity of concrete and compressive strength of concrete was higher than plain concrete.

In this paper, the mechanical properties of GGBFS concrete according to the replacement ratio of electric arc furnace oxidizing slag fine aggregate was evaluated. As the replacement rate of EOS fine aggregate increased, the amount of slump and air content decreased. In addition, EOS concrete increased the initial compressive strength, but, it tended to decrease at 28 days.

The use of recycled aggregate has been highly recommended for the environmental protection of nature and absolute shortage of natural aggregate's resource, but experimental methods adequate for each recycled product have not been established and also the data have not been enough to ensure the control of concrete quality. Thus, this study has an aim of applying high volume of recycled aggregate to the fabrication of concrete by investigating that production methods of recycled aggregate and its replacement ratio have effects on the performance of concrete.

This study was examined the variation of unit water content and fine aggregate ratio in concrete for nuclear power structure using a large amoung of crushed sand.

In this paper, the heavy metal leaching of mortar substituted the crushed waste glass as fine aggregate are evaluated. From the results, when the heavy weight waste glass substitution ratio increase, leching quantities of heavy metal is increased. Therefore, it is needed that the characteristics of heavy metal leching according to waste glass substitution ratio in mortar specimens.

This study evaluates the material performance of slump value and compressive strength of the concrete which was made by recycled sand and blast furnace slag powder(BFSP). The main variables are replacement ratio of BFSP. As a result, it was evaluated that more detailed evaluation is needed in long-term strength development and the compensation of slump value to the replacement ratio of BFSP.

As the industrialization is rapidly growing and the quantities of heavy weight waste glass have been quickly increased but the most of them are not recycled. The heavy weight waste glass have been treated by illegal dumping or being buried in landfills. And, it is caused some problem such as the environmental pollution. So, it is needed to investigate the possibility of recycling of heavy weight waste glass as concrete material ingredient. In this paper, the mechanical properties of mortar substituted the crushed waste glass as fine aggregate are evaluated. From the results, when waste glass substitution ratio increase, fluidity and specific gravity increase. However, the compressive strength and flexural strength decrease. So, the mechanical properties of mortar are significantly affected by waste glass substitution ratio.

In this paper, the length change of mortar substituted the crushed heavy weight waste glass as fine aggregate are evaluated. From the results, when waste glass substitution ratio increase, ASR expansion increase. However, the dry shrinkage decrease. So, the length change of mortar are significantly affected by waste glass substitution ratio.