Yeosu National Industrial Complex is one of Korea’s representative petrochemical industrial complexes where crude oil refining and petrochemical companies are concentrated. According to the results of the 2021 chemical emissions survey, during the process of manufacturing, storage, and transportation at the Yeosu National Industrial Complex, various hazardous chemicals, including hazardous air pollutants, volatile organic compounds and odorous substances are being emitted into the air, affecting the surrounding environment and the health of residents. The Ministry of Environment is applying strengthened standards by designating the Yeosu National Industrial Complex as an air conservation special measure area and establishing odor management areas to manage the air environment. Nevertheless, odor complaints continue to be registered and related complaints increase when turnaround work is carried out. Since air emissions are not counted during periods of turnaround as normal operations are temporarily suspended, it was difficult to establish policies to reduce odor complaints because the source of emissions and emission quantities cannot be ascertained with certainty. In this study, the extensive Yeosu National Industrial Complex was subdivided into 4 areas using a mobile vehicle equipped with PTR-ToF-MS capable of real-time analysis without sample pretreatment being carried out. Measurements were repeated during the day, night, and dawn while moving around the internal boundary of the plant and the boundary of each region where turnaround activities were being carried out. As a result, the recorded measurement for acrylonitrile was the highest at 6340.0 ppb and propyne and propene were measured the most frequently at 128 times each. Based on these results, it will be possible to help reduce emissions through process improvement by efficiently operating air measurement networks and odor surveys that conduct regular measurements throughout the year and providing actual measurement data to the plant. Also, it will help reduce odor complaints and establish systematic air management policies.

Activated carbon fiber (ACF) filters are widely used to remove volatile organic compounds (VOCs) in air cleaning devices. The performance of ACF filters could be enhanced combining adsorption process with photodegradation process. In this study, to investigate this enhancement effect, a duct-type reactor was made and TiO2 was i㎜obilized on a co㎜ercialized ACF filter. Benzene, toluene, and m-xylene (BTX) were chosen as target compounds. Removal experiments for BTX were done under different air velocity and upstream concentration conditions. The range of inlet concentration was 200～1,400 ppb and the air velocities were 0.4, 0.7 and 1.0 m/s. Adsorption by an ACF filter alone showed high removal efficiency of BTX, depending on the BTX species, the upstream concentration, and the air velocity. The combination of TiO2 and ACF filter significantly increased removal of benzene which was less removed than other pollutants by an ACF filter alone. It was found that the combination effect was small in removal test of toluene and m-xylene. Removal efficiency in the tested experimental conditions was decreased in order of toluene > m-xylene > benzene.

Nowadays, cremation is becoming generalized and also the frequency of utilization of cremation is increasing in Korea. Futhermore, there is a possibility that indoor air pollution is caused by particles, gas pollutants or microbial pollutants from laying down and cremation of corpses, and also the bereaved family and grievers inside the crematory. Therefore, the major goals in this study were that first, we investigated and analyzed the air quality of particular indoor environments such as the crematory. Second, we assessed the health risk for workers. Finally, we collected and assessed the basic data in special indoor environments because this kind of study had not been performed. We sampled and analyzed PM10 (heavy metal), VOCS, HCHO, infectious microorganisms to grasp the characteristics of indoor air quality in the crematory through sampling four times from 7th July to 16th October in 2004. Besides, we did personal air sampling of PM10 (heavy metal) and VOCS to grasp personal exposure of workers from indoor hazardous air pollutants. We conjectured that main sources of pollutants in crematory are cremation, buried corpses, and moving of grievers, also increasing the seriousness of microbial pollutants gathering strength, especially. As we assessed infectious microorganisms of indoor air and executed research for indoor hazardous air pollutants, we want to offer the way of study and policy of management for particular indoor environments like a crematory.

Petroleum refineries have been considered as an important emission source for atmospheric volatile hazardous air pollutants(HAPs). The emission source includes petroleum refinery processes and process equipment. The control strategy for volatile HAPs requires emission estimations of these pollutants. However, systematic methods of volatile HAPs emission from petroleum refineries have not yet been established. Accordingly, present study surveyed the estimation method of volatile HAPs emitted from the petroleum refinery processes and process equipment. The emission estimation methods for the petroleum refinery processes are applied for 11 petroleum refining facilities: fluidized catalytic cracking, thermal cracking, moving bed catalytic cracking, compressed engine, blowdown system, vacuum distilled column condensator, natural gas or distilled boiler, natural gas or distilled heater, oil boiler, oil heater and flare. Four emission estimation methods applied for the petroleum refinery process equipment are as follows: average emission factor approach, screening ranges approach, EPA correlation approach and unit-specific correlation approach. The process equipment for which emission factors are available are valves, pump seals, connectors, flanges and open-ended lines.