The laser power has been continually increased since the laser was developed in the mid-20th century. Achieving higher laser power requires not only enhancing the cooling performance of laser systems but also addressing the potential degradation of optical characteristics due to thermal deformation induced by laser beam absorption in a mirror. This study delves into the thermal deformation characteristics of mirrors in high-power laser systems. To minimize thermal deformation by heat absorption, Zerodur, known for its low coefficient of thermal expansion, was employed as the mirror material. Various configurations including circular, rectangular, and spline shapes were implemented on a solid mirror structure. Furthermore, two different diameter of a mirror, 300mm and 400mm, were considered to investigate the size effect of the high-power laser beams. Also, three different transmitted beam power were adopted: 50W, 250W, and 500W. Based on the finite element analysis for the thermal deformation, the deformation characteristics of the different types of mirror structures were investigated and analyzed for high-power laser systems.

Some well-known luxury fashion brands log off social media or deliberately keep their accounts empty. The article investigates how consumers of high-end fashion brands react to this social media strategy through a series of experiments. This study provides managerial implications for social media strategy of luxury fashion brands.

The noise of large and high-power machines was evaluated and the establishment of mitigation measures was studied. The noise level of large machinery and high-power machinery installed at domestic plant sites was investigated and compared with the noise disclosure regulations to see if they met the standards of the Occupational Safety and Health Act. This investigated the soundproofing design of large and high-power machines and the soundproofing design of complex noise of large machines installed in the plant, and prepared the design standards of the plant design company. In the future, we will compile a database of data to secure standards for research and plant design related to noise reduction, and propose noise improvement and management measures for large and high-power machines.

Concrete decontamination tools capable of removing the nuclear contaminated surface are necessary to minimize the amount of concrete waste generated in the process of decontamination and dismantling of nuclear power plants. Laser scabbling is a decontamination technique that removes the contaminated surface layers concrete surface by inducing internal explosion. The application principle of laser scabbling technology uses the porous nature of concrete including moisture. When high thermal energy is applied to the concrete surface, an explosion at pores is induced along with an increase in water vapor pressure. High-powered laser beam can be an effective induction source of local explosive spalling on concrete surface. In this study, the scabbling test using a 5 kW highpowered fiber laser was conducted on the concrete blocks to establish the optimal conditions for surface decontamination. It was also measured the volume peeled off the concrete surface under the conditions of two different laser head speeds. Furthermore, we tested the removal efficiency of radioactive concrete particles generated during high-power fiber laser scabbling process. A 5 kW laser beam was applied to the concrete surface at two different laser head speeds - 120 mm/min and 600 mm/min. The laser beam repeatedly moved 200 mm horizontally and 40 mm vertically within the concrete block. The amount of surface concrete removed from concrete block was calculated from the measurement of the volume and mean depth using a 3D scanner device (laser-probed Global Advantage 9.12.8(HEXAGON)) for the two different the laser head speeds. By increasing the laser head speed, less explosive spalling occurred due to shorter contact time of the laser beam with the concrete. The laser head speed of 600 mm/min reduced about 89% of the waste generated by shallow depth of scabbling as compared to the waste generated at the laser head speed of 120 mm/min. The fiber laser scabbling system was developed for surface decontamination of radioactive concrete in nuclear power plants. Tests were performed to find the optimum parameters to reduce the generation of particulate waste from the contaminated concrete surface by controlling the laser head speeds. It was confirmed that the wastes from surface decontamination was reduced up to 89% by increasing laser head speed from 120 mm/min to 600 mm/min. It was also observed that the cylindrical tube effectively vacuumed the debris generated by the explosive spalling into the collector. Removal efficiencies of concrete particles were measured greater than 99.9% with ring blower power of 650 air watt of the filter system.

A laser scabbling experiment was performed using a high-power fiber laser to investigate the removal rate of the concrete block and the scabbled depth. Concrete specimens with a 28-day compressive strength of 30 MPa were used in this study. Initially, we conducted the scabbling experiment under a stationary laser beam condition to determine the optimum scan speed. The laser interaction time with the concrete surface varied between 3 s and 40 s. The degree of spalling and vitrification on the surface was primarily dependent on the laser interaction time and beam power. Furthermore, thermal images were captured to investigate the spatial and temporal distribution of temperature during the scabbling process. Based on the experimental results, the scan speed at which the optical head moved over the concrete was set to be 300 mm∙min−1 or 600 mm∙min−1 for the 4.8-kW or 6.8-kW laser beam, respectively. The spalling rates and average depth on the concrete blocks were measured to be 87 cm3∙min−1 or 227 cm3∙min−1 and 6.9 mm or 9.8 mm with the 4.8-kW or 6.8-kW laser beams, respectively.

Vertically Aligned Carbon Nanotubes (VACNTs)-coated flexible aluminium (Al) foil is studied as an electrode for supercapacitor applications. VACNTs are grown on Al foil inside thermal Chemical Vapor Deposition (CVD) reactor. 20 nm thick layer of Fe is used as a catalyst while Ar, H2 and C2H2 are used as precursor gases. The effect of growth temperature on the structure of CNTs is studied by varying the temperature of CVD reactor from 550 °C to 625 °C. Better alignment of VACNTs arrays on Al foil is recorded at 600 °C growth temperature in comparison to other processing temperatures. Cyclic voltammetry results shows that VACNTs-coated Al foil has a specific capacitance of ~ 3.01 F/g at a scan rate of 50 mV/s. The direct growth of VACNT array results in better contact with Al foil and thus low ESR values observed in impedance spectroscopy analysis. This leads to a fast charge–discharge cycle as well as a very high value of power density (187.79 kW/ kg) suitable for high power applications. Moreover, wettability study shows that the fabricated VACNT electrode has a contact angle of more than 152° which signifies that it is a superhydrophobic surface and hence shows lower specific capacitance in comparison to reported values for VACNT array. Therefore, it is necessary to develop suitable post-processing strategies to make VACNTs hydrophilic to realize their full potential in supercapacitor applications.

The purpose of this study was to improve the noise measurement method of noise sources and the corresponding noise reduction measures during each manufacturing process closest to the workers in the large and hige power machine. To this end, the noise generated in the large and high power machine was measured and analyzed, and the frequency characteristics of noise sources and the causes of noise were identified. The noise map was used to predict the noise reduction effect. Moreover, it is expected that this will ultimately contribute to the reduction of human risks caused by the noise of the large and high power machine.

Analysis of the 2016 Gyeongju earthquake and the 2017 Pohang earthquake showed the characteristics of a typical high-frequency earthquake with many high-frequency components, short time strong motion duration, and large peak ground acceleration relative to the magnitude of the earthquake. Domestic nuclear power plants were designed and evaluated based on NRC's Regulatory Guide 1.60 design response spectrum, which had a great deal of energy in the low-frequency range. Therefore, nuclear power plants should carry out seismic verification and seismic performance evaluation of systems, structures, and components by reflecting the domestic characteristics of earthquakes. In this study, high-frequency amplification factors that can be used for seismic verification and seismic performance evaluation of nuclear power plant systems, structures, and equipment were analyzed. In order to analyze the high-frequency amplification factor, five sets of seismic time history were generated, which were matched with the uniform hazard response spectrum to reflect the characteristics of domestic earthquake motion. The nuclear power plant was subjected to seismic analysis for the construction of the Korean standard nuclear power plant, OPR1000, which is a reactor building, an auxiliary building assembly, a component cooling water heat exchanger building, and an essential service water building. Based on the results of the seismic analysis, a high-frequency amplification factor was derived upon the calculation of the floor response spectrum of the important locations of nuclear power plants. The high-frequency amplification factor can be effectively used for the seismic verification and seismic performance evaluation of electric equipment which are sensitive to high-frequency earthquakes.

본 연구는 6주간의 고강도 복합 훈련 프로그램을 통해 카누 선수의 심폐기능(Cardiorespiratory Function), 체간 등속성 근력(Isokinetic Trunk Strength) 그리고 무산소성 파워(Anaerobic Power)에 미치는 영향을 확인하는데 있다. 이를 위해 고등학교 카누 선수 9명을 대상으로 고강도 복합 훈련 프로그램을 적용하였으며, 고강도 훈련 프로그램은 주 2회의 유산소 운동(화, 목), 주 3회의 무산소 운동(월, 수, 금) 그리고 주 5회의 유연성 운동을 실시하였다. 고강도 복합 훈련 프로그램의 핵심은 무산소성 훈련 프로그램으 로 기존 1RM의 퍼센트(%)를 나누어 훈련하던 방식과는 달리 횟수에 대한 100%의 중량을 가지고 하는 훈련이며, 유산소성 운동과 짐볼운동은 보조적인 개념으로 실시하였다. 연구결과, 고강도 복합 훈련 프로그램에 따른 신체구성에서 신장과 근육량은 통계적으로 의한 차이가 있었으며, 체중, 체지방율, BMI는 통계적으로 유의한 차이는 없는 것으로 나타났다. 심폐기능의 경우, 최대산소섭취량과 총 운동시간은 통계적으로 유의한 차이가 있는 것으로 나타났다. 체간 등속성 근력의 경우, 각속도 30°/sec에서는 Flexors 운동시 Peak Torque 항목에서만 통계적으로 유의한 차이가 있는 것으로 나타났다. 각속도 120°/sec에서는 Extensors 운동시 Total Work 항목에서만 통계적으로 유의한 차이가 있는 것으로 나타났다. 무산소성 파워의 경우, Peak Power, Average Power, Peak Drop의 모든 항목에서 통계적으로 유의한 차이가 없는 것으로 나타났다. 이상의 결과를 종합해보면 심폐기능에서는 유의한 개선효과가 있었지만 체간 등속성 근력과 무산소성 파워 항목에서 증가하는 경향은 있었지만 통계적인 차이는 없는 것으로 나타났다. 결론적으로 선수 개개인의 근력과 파워가 개선되는 경향이 나타난 것을 고려하면 훈련기간을 6주 이상으로 구성하고 사례수가 보강된다면 체계적인 결과를 얻을 수 있을 것으로 생각된다. 본 연구에서 적용한 고강도 복합 훈련 프로그램은 카누 선수들의 경기력 향상 효과를 기대할 수 있는 훈련 프로그램으로 적용될 수 있을 것으로 판단된다.

High-quality and solution processable graphene sheets are produced by a simple electrochemical exfoliation method and employed as a high-power anode for lithium-ion batteries (LIBs). The electrochemically exfoliated graphene (EEG) composed of a few layers of graphene sheets, have low oxygen content and high C/O ratio (~ 14.9). The LIBs with EEG anode exhibit ultrafast lithium storage and excellent cycling stability, but low initial efficiency. The excellent rate capability and cycling stability are attributed to the favorable structural and chemical properties of the EEG, but the large irreversibility needs to be overcome for practical applications.

We prepared Y3Al5O12;Ce3+,Pr3+ transparent ceramic phosphor using a solid state reaction method. By XRD pattern analysis and SEM measurement, our phosphors reveal an Ia-3d(230) space group of cubic structure, and the transparent ceramic phosphor has a polycrystal state with some internal cracks and pores. In the Raman scattering measurement with an increasing temperature, lattice vibrations of the transparent ceramic phosphor decrease due to its more perfect crystal structure and symmetry. Thus, low phonon generation is possible at high temperature. Optical properties of the transparent ceramic phosphor have broader excitation spectra due to a large internal reflection. There is a wide emission band from the green to yellow region, and the red color emission between 610 nm and 640 nm is also observed. The red-yellow phosphor optical characteristics enable a high Color Rendering Index (CRI) in combination with blue emitting LED or LD. Due to its good thermal properties of low phonon generation at high temperature and a wide emission range for high CRI characteristics, the transparent ceramic phosphor is shown to be a good candidate for high power solid state white lighting.

The study on the database for the noise of the large machine and high power machine. The object of this project is to prepare the countermeasure of the health care according to investigate and database the basic information of the large machine and high power machine. To accomplish the object ; The dimension and noise of the large machine, which is mounted in the factory, was investigated. And the prediction and measurement method of the noise for the machine by manufacturers were investigated. The database of the noise by the machine type and power was built. The measurement and management methods for the machine noise were considered. The database of the noise was built from the measurement data. The major sound sources and frequency range for the large machine and the high power machine were investigated. The noise effect by the large machine and the high power machine was investigated. The application fields are; The setting of the management plan of the noise which generates from the large machine and the high power machine. The effective noise reduction for the major sound source with low cost. The application as the frequency transition considering the psycho-acoustics characteristics.

In order to prepare anode materials for high power lithium ion secondary batteries, carbon composites were fabricated with a mixture of petroleum pitch and coke (PC) and a mixture of petroleum pitch, coke, and natural graphite (PCNG). Although natural graphite has a good reversible capacity, it has disadvantages of a sharp decrease in capacity during high rate charging and potential plateaus. This may cause difficulties in perceiving the capacity variations as a function of electrical potential. The coke anodes have advantages without potential plateaus and a high rate capability, but they have a low reversible capacity. With PC anode composites, the petroleum pitch/cokes mixture at 1:4 with heat treatment at 1000 oC (PC14-1000C) showed relatively high electrochemical properties. With PC-NG anode composites, the proper graphite contents were determined at 10~30 wt.%. The composites with a given content of natural graphite and remaining content of various petroleum pitch/cokes mixtures at 1:4~4:1 mass ratios were heated at 800~1200 oC. By increasing the content of petroleum pitch, reversible capacity increased, but a high rate capability decreased. For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with an increase in heat treatment temperature. The carbonaceous composites fabricated with a mixture of 30 wt.% natural graphite and 70 wt.% petroleum pitch/cokes mixture at 1:4 mass ratio and heat treated at 1000 oC showed relatively high electrochemical properties, of which the reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 10 C/0.2 C), and charge capacity at 5 C were 330 mAh/g, 79 %, 80 %, and 60 mAh/g, respectively.