The most comprehensive and particularly reliable method for non-destructively measuring the residual stress of the surface layer of metals is the sin method. When X-rays were used the relationship of sin measured on the surface layer of the processing metal did not show linearity when the sin method was used. In this case, since the effective penetration depth changes according to the changing direction of the incident X-ray,  becomes a sin function. Since  cannot be used as a constant, the relationship in sin cannot be linear. Therefore, in this paper, the orthogonal function method according to Warren’s diffraction theory and the basic profile of normal distribution were synthesized, and the X-ray diffraction profile was calculated and reviewed when there was a linear strain (stress) gradient on the surface. When there is a strain gradient, the X-ray diffraction profile becomes asymmetric, and as a result, the peak position, the position of half-maximum, and the centroid position show different values. The difference between the peak position and the centroid position appeared more clearly as the strain (stress) gradient became larger, and the basic profile width was smaller. The weighted average strain enables stress analysis when there is a strain (stress) gradient, based on the strain value corresponding to the centroid position of the diffracted X-rays. At the 1/5 max height of X-ray diffraction, the position where the diffracted X-ray is divided into two by drawing a straight line parallel to the background, corresponds approximately to the centroid position.

There is a considerable amount of research on metal material product worker’s hearing loss caused by noise that comes from manufacturing process. A further investigation that characterizes the sound that comes from manufacturing process of metal material products. however. To do this, a noise management plan is needed. It should include a generated sound process from the main sources of disturbance at manufacturing process areas. And a soundproof measurement will identify the amount of noise reduction needed for a hearing-safe working environment. Finally, researchers in this study measured tests on the noise and the vibration process, and the noise caused by operations allowed for an investigation on the suitability of certain environmental conditions. Noise-related programs can be used to predict the noise distribution of the noise level characteristic. This can help identify and reduce the presence of sound interference through sound proofing measures.

중금속은 생체 내에서 분해되지 않고 장기간에 걸쳐 축적되는 특성으로 도시의 생물 다양성을 위협하는 위험한 오염물질 중 하나이다. 도시지역의 대기 중 중금속오염을 평가하기 위해 중금속 노출 정도에 따라 생물 체내의 축적농도 를 비교하는 생물학적 모니터링의 필요성이 요구되고 있다. 본 연구는 중금속 모니터링 시료로서 둥지 재료의 활용 가능성을 검토하고 중금속이 박새과 조류에 미치는 영향을 파악하기 위해 수행되었다. 연구지역은 충청남도 천안시 소재 대학교 캠퍼스 내 녹지공간(14개), 도시산림(11개), 도시공원(29개)으로 총 54개의 인공새집이 설치되었다. 조류 이용률은 도시공원 6/29개(20.68%), 캠퍼스 내 녹지공간 11/14개(78.57%), 도시산림 8/11개(72.72%)로 나타났다. 수거한 둥지로부터 이끼 재료를 채취하였고 중금속 분석을 통하여 도시녹지 유형별 중금속축적특성과 중금속이 박새과 조류의 이소 성공 여부에 미치는 영향을 비교하였다. 분석결과 아연의 평균 농도는 228.08±209.62㎍/dry g, 납의 평균 농도는 17.67±6.72㎍/dry g로 나타났다. 도시녹지 유형별 아연농도는 유의한 차이를 나타내지 않았으나(Kruskal- Wallis test, p-value=0.28) 납 농도는 유의한 차이를 보였다(Kruskal-Wallis test, p<0.05*). 중금속 분석을 진행한 21개 의 박새과 조류 둥지 중 11개(52.38%)의 둥지에서 조류의 이소가 관찰되었다. 각 도시녹지 유형에서 관찰된 조류의 이소는 캠퍼스 내 녹지공간 7개(77.78%), 도시산림 6개(85.71%), 도시공원 1개(20%)로 주로 도시산림과 캠퍼스 내 녹지공간에서 이소가 확인되었다. 박새과 조류의 이소 성공 여부에 중금속 축적특성이 미치는 영향을 확인하기 위해 중금속 농도를 비교하였으나 통계적으로 유의한 차이는 나타나지 않았다(Zn : W=44, p-value=0.74, Pb : t=0.64676, df =7.2422, p-value =0.54). 본 연구는 박새과 둥지 재료를 중금속 모니터링 시료로 사용한 기초 연구로 비침습적인 생물학적 모니터링의 기초자료로 활용될 수 있을 것으로 판단된다.

In this study, a new manufacturing process for a multilayer-clad electrical contact material is suggested. A thin and dense BCuP-5 (Cu-15Ag-5P filler metal) coating layer is fabricated on a Ag plate using a high-velocity oxygen-fuel (HVOF) process. Subsequently, the microstructure and bonding properties of the HVOF BCuP-5 coating layer are evaluated. The thickness of the HVOF BCuP-5 coating layer is determined as 34.8 μm, and the surface fluctuation is measured as approximately 3.2 μm. The microstructure of the coating layer is composed of Cu, Ag, and Cu-Ag-Cu3P ternary eutectic phases, similar to the initial BCuP-5 powder feedstock. The average hardness of the coating layer is 154.6 HV, which is confirmed to be higher than that of the conventional BCuP-5 alloy. The pull-off strength of the Ag/BCup-5 layer is determined as 21.6 MPa. Thus, the possibility of manufacturing a multilayer-clad electrical contact material using the HVOF process is also discussed.

From measured thermal conductivity and modeling by simulation, this study suggests that U-factors are highly related to materials used between steel and polymer. The objective and prospective point of this study are to relate the relationship between the U-factor and the thermal conductivity of the materials used. For the characterization, EDX, SEM, a thermal conductive meter, and computer simulation utility are used to analyze the elemental, surface structural properties, and U-factor with a simulation of the used material between steel and polymer. This study set out to divide the curtain wall system that makes up the envelope into an aluminum frame section and entrance frame section and interpret their thermal performance with U-factors. Based on the U-factor thermal analysis results, the target curtain wall system is divided into fix and vent types. The glass is 24 mm double glazing (6 mm common glass +12 mm Argon +6 mm Low E). The same U-factor of 1.45 W/m2·K is applied. The interpretation results show that the U-factor and total U-value of the aluminum frame section are 1.449 and 2.343 W/m2·K, respectively. Meanwhile, those of the entrance frame section are 1.449 and 2.

본 연구에서는 “이온젤” 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전 해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전 고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작 하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특 성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었 다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료 되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다

Layered LiNi0.83Co0.11Mn0.06O2 cathode materials single- and dual-doped by the rare-earth elements Ce and Nd are successfully fabricated by using a coprecipitation-assisted solid-phase method. For comparison purposes, nondoping pristine LiNi0.83Co0.11Mn0.06O2 cathode material is also prepared using the same method. The crystal structure, morphology, and electrochemical performances are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) mapping, and electrochemical techniques. The XRD data demonstrates that all prepared samples maintain a typical α-NaFeO2-layered structure with the R-3m space group, and that the doped samples with Ce and/or Nd have lower cation mixing than that of pristine samples without doping. The results of SEM and EDS show that doped elements are uniformly distributed in all samples. The electrochemical performances of all doped samples are better than those of pristine samples without doping. In addition, the Ce/Nd dualdoped cathode material shows the best cycling performance and the least capacity loss. At a 10 C-rate, the electrodes of Ce/Nd dual-doped cathode material exhibit good capacity retention of 72.7, 58.5, and 45.2% after 100, 200, and 300 cycles, respectively, compared to those of pristine samples without doping (24.4, 11.1, and 8.0%).

In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving noncorrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.

전기⋅전자산업이 급격하게 발전함에 따라 유가금속 및 희소금속의 수요가 급증하고 있다. 유가금속들은 주로 제련산업 공정에서 다량 방출되며, 회수기술 부족으로 중화, 치환, 흡착을 통해 폐기되어 큰 비용으로 경제적이지 못하다. 이에 분리막을 통한 유가금속회수 소재개발의 필요성이 강조되고 있다. 유가금속이 포함된 습식제련 공정 침출액(15% 황산 용액, 온도 60°C)은 다량의 다가이온과 1가이온을 포함하고 있기 때문에 이온별 분리가 가능해야 하며, 특히 구리와 같은 2가 유가금속 분리성능이 우수해야 한다. 또한, 지속적인 분리/농축을 위해 산에 대한 안정성이 중요하다. 따라서 본 연구를 통해 2가 금속 배제율 98%, 유량 33GFD 성능을 1개월 이상 유지하는 나노분리막 제조 연구 개발을 수행하고 있다.

There is a considerable amount of research on metal material product worker’s hearing loss caused by noise that comes from manufacturing process. A further investigation that characterizes the sound that comes from manufacturing process of metal material products. however. To do this, a noise management plan is needed. It should include a generated sound process from the main sources of disturbance at manufacturing process areas. And a soundproof measurement will identify the amount of noise reduction needed for a hearing-safe working environment. Finally, researchers in this study measured tests on the noise and the vibration process, and the noise caused by operations allowed for an investigation on the suitability of certain environmental conditions. Noise-related programs can be used to predict the noise distribution of the noise level characteristic. This can help identify and reduce the presence of sound interference through sound proofing measures.

Assessment of noise exposed population is to check the environment noise level and social influence in order to reduce the risks such as annoyance and disturbance that are generated by environmental noise. Also, this method suggests the preferential noise abatement policy and action plan by accurately finding the area that the noise causes harmful effect to human health. Recently, a noise map, which can predict noise in comprehensive area, is used for the assessment of noise exposed population, breaking from the methods using existing measures. In particular, countermeasure for noise can be considered more effectively by using assessment methods of noise exposed population for specific noise level, area, and building types which are the main input factors in noise maps. In this study, we propose noise reduction ranking decision at manufacturing process of metal material products due to noise map.

The object of this paper is to examine the noise generating mechanism at manufacturing process of metal material products. To accomplish the object; A noise generating mechanism of high noise machine, which is mounted in the small and medium size enterprise, was investigated. The measurement method of the noise for the machine by manufacturers were investigated. The noise at the 250 point of the manufacturing procrss machine in the 40 processes of the 3 factories, 3 business fields was measured. The database of the noise was built from the measurement data. The major sound sources and frequency range for the manufacturing processes of metal product machine was investigated.

The object of this paper is to evaluate a working environment noise at manufacturing process of metal material products. To accomplish the object; An employee noise exposure criteria, which is mounted in big size enterprise, was investigated. The noise at the 460 points of the manufacturing process machine in the 38 processes of the 1 factories were measured. The database of the noise was built from the measurement data. The major sound sources and frequency range for the manufacturing process of metal material product machine was investigated. In this study, we compare working environment noise criteria of korean with employee noise exposure criteria

The object of this paper is investigate noise source at metal material product manufacturing plant and create noise map for predict noise. The plant is located close to a residential area, and residents noise exposure damage expected. Through this research 68 points noise sources were measured. And according to analysis result, 30 percent of noise sources are measured above 90dB(A). Based on this measurement results were create a noise map, and comparison between the predicted noise and the background noise. The noise maps were calculated by noise prediction software using measurement data, GIS data, ESRI SHP files and actual survey data. As a analysis result, metal material products manufacturing plants are will have an effect by noise on the nearby residential area.

The object of this paper is to examine the noise generating mechanism at manufacturing process of metal material products. To accomplish the object; A noise generating mechanism of high noise machine, which is mounted in the small and medium size enterprise, was investigated. The measurement method of the noise for the machine by manufacturers were investigated. The noise at the 250 points of the manufacturing process machine in the 40 processes of the 3 factories, 3 business fields was measured. The database of the noise was built from the measurement data. The major sound sources and frequency range for the manufacturing process of metal material product machine was investigated.