This study aimed to develop an efficient recycling process for wastewater generated from soil-washing used to remediate uranium (U(VI))-contaminated soil. Under acidic conditions, U(VI) ions leached from the soil were precipitated and separated through neutralization using hydrazine (N2H4). N2H4, employed as a pH adjuster, was decomposed into nitrogen gas (N2), water (H2O), and hydrogen ions (H+) by hydrogen peroxide (H2O2). The residual N2H4 was precipitated when the pH was adjusted using sulfuric acid (H2SO4) to recycle the wastewater in the soil-washing process. This purified wastewater was reused in the soil-washing process for a total of ten cycles. The results confirmed that the soil-washing performance for U(VI)-contaminated soil was maintained when using recycled wastewater. All in all, this study proposes an efficient recycling process for wastewater generated during the remediation of U(VI)-contaminated soil.

Radioactive contamination of soil on the site of a nuclear facility has a characteristic that radioactive nuclides are adsorbed into the pores between soil particles, making it quite difficult to decontaminate. For this reason, research on the development of various decontamination processes is being actively conducted. In this study, among various decontamination studies, a soil decontamination process using supercritical carbon dioxide was presented. The decontamination process uses supercritical carbon dioxide as the main solvent, which has a higher penetration power than other materials. Therefore, the process consists of the process of desorbing and extracting the target radionuclides between particles of soil. However, since nuclides exist as ions in the soil, polar chelating ligand material was introduced as an additive to nonpolar supercritical carbon dioxide for smooth chemical reactions in the soil. Thereafter, from the viewpoint of improving process continuity and efficiency, an alcohol material was introduced as an auxiliary solvent for liquefaction of chelating ligand in a solid state. Through prior research on the selection of a solvent for liquefaction of chelating ligand, ethanol and 2-propanol were finally selected based on whether the chelating ligand was dissolved. However, if the auxiliary solvent in which the chelating ligand is dissolved is to be combined with radionuclides in the soil, it must first be well dissolved in supercritical carbon dioxide, the main solvent. Therefore, in this study, the solubility of ethanol and 2-propanol in supercritical carbon dioxide was measured and the suitability was evaluated. The temperature conditions were carried out at 40°C, the same as the previously designed decontamination process, and the measurement was conducted by adjusting the pressure and volume through a syringe pump and a variable volume device. In addition, solubility was measured based on the observation of the ‘cloud point’ in which the image becomes cloudy and then bright. As a result of the experiment, several solubility points were measured at a pressure of 150 bar or less. If the flow rate ratio of supercritical carbon dioxide and auxiliary solvent derived from the results is applied to the soil decontamination process, it is expected that the process efficiency will increase in the future.

Korea faces decommissioning the nation’s first commercial nuclear power plant, the Kori-1 and Wolseong-1 reactors. In addition, other nuclear power plants that will continue to operate will also face decommissioning over time, so it is essential to develop independent nuclear facility decommissioning and site remediation technologies. Among these various technologies, soil decontamination is an essential not only in the site remediation after the decommissioning of the highly radioactive nuclear facility, but also in the case of site contamination caused by an accident during operation of the nuclear facility. But the soil, which is a porous material, is difficult to decontaminate because radionuclides are adsorbed into the pores. Therefore, with the current decontamination technology, it is difficult to achieve the two goals of high decontamination efficiency and secondary waste reduction at the same time. In this study, a soil decontamination process with supercritical carbon dioxide as the main solvent was presented, which has better permeability than other solvents and is easy to maintain critical conditions and change physical properties. Through prior research, a polar chelating ligand was introduced as an additive for smooth extraction reaction between radionuclides present as ions in soil and nonpolar supercritical carbon dioxide. In addition, for the purpose of continuity of the process, a candidate group of auxiliary solvents capable of liquefying the ligand was selected. In this research evaluated the decontamination efficiency by adding the selected auxiliary solvent candidates to the supercritical carbon dioxide decontamination process, and ethanol with the best characteristics was selected as the final auxiliary solvent. In addition, based on the decontamination effect under a single condition of the auxiliary solvent found in the Blank Test process, the possibility of a pre-treatment leaching process using alcohol was tested in addition to the decontamination process using supercritical carbon dioxide. Finally, in addition to the existing Cs and Sr, the possibility of decontamination process was tested by adding U nuclides as a source of contamination. As a result of this research, it is expected that by minimizing secondary waste after the process, waste treatment cost could be reduced and the environmental aspect could be contributed, and a virtuous cycle structure could be established through reuse of the separated carbon dioxide solvent. In addition, adding its own extraction capacity of ethanol used for liquefaction of solid-phase ligands is expected to maximize decontamination efficiency in the process of increasing the size of the process in the future.

Today, the domestic and international nuclear power industry is experiencing an acceleration in the scale of the nuclear facility decommissioning market. This phenomenon is also due to policy changes in some countries, but the main reason is the rapid increase in the proportion of old nuclear power plants in the world, mainly in countries that introduced nuclear power plants in the early stages. Decontamination is essential in the process of decommissioning nuclear facilities. Among various decontamination targets, radionuclides are adsorbed between pores in the soil, making physical decontamination quite difficult. Therefore, various chemical decontamination technologies are used for contaminated soil decontamination, and the current decontamination technologies have a problem of generating a large amount of secondary wastes. In this study, soil decontamination technology using supercritical carbon dioxide is proposed and aimed to make it into a process. This technology applies cleaning technology using supercritical fluids to decontamination of radioactive waste, it has important technical characteristics that do not fundamentally generate secondary wastes during radioactive waste treatment. Supercritical carbon dioxide is harmless and is a very useful fluid with advantages such as high dissolution, high diffusion coefficient, and low surface tension. However, since carbon dioxide, a non-polar material, shows limitations in removing polar and ionic metal wastes, a chelating ligand was introduced as an additive. In this study, a ligand material that can be dissolved in supercritical carbon dioxide and has high binding ability with polar metal ions was selected. In addition, in order to increase the decontamination efficiency, an experiment was conducted by adding an auxiliary ligand material and ultrasonic waves as additives. In this study, the possibility of liquefaction of chelating ligands and auxiliary ligands was tested for process continuity and efficiency, and the decontamination efficiency was compared by applying it to the actual soil classified according to the particle size. The decontamination efficiency was derived by measuring the concentration of target nuclides in the soil before and after decontamination through ICP-MS. As a result of the experiment, it was confirmed that the liquefaction of the additive had a positive effect on the decontamination efficiency, and a difference in the decontamination efficiency was confirmed according to the actual particle size of the soil. Through this study, it is expected that economic value can be created in addition to the social value of the technology by ensuring the continuity of the decontamination process using supercritical carbon dioxide.

The purpose of this study was to effectively purify U-contaminated soil-washing effluent using a precipitation/distillation process, reuse the purified water, and self-dispose of the generated solid. The U ions in the effluent were easily removed as sediments by neutralization, and the metal sediments and suspended soils were flocculated–precipitated by polyacrylamide (PAM). The precipitate generated through the flocculation–precipitation process was completely separated into solid–liquid phases by membrane filtration (pore size < 45 μm), and Ca2+ and Mg2+ ions remaining in the effluent were removed by distillation. Even if neutralized or distilled effluent was reused for soil washing, soil decontamination performance was maintained. PAM, an organic component of the filter cake, was successfully removed by thermal decomposition without loss of metal deposits including U. The uranium concentration of the residual solids after distillation is confirmed to be less than 1 Bq·g−1, so it is expected that the self-disposal of the residual solids is possible. Therefore, the treatment method of U-contaminated soil-washing effluent using the precipitation/distillation process presented in this study can be used to effectively treat the washing waste of U-contaminated soil and self-dispose of the generated solids.

원전사고 및 시설보수 과정에서 방출되는 방사성물질 중 137Cs은 토양의 주 오염원 중 하나이다. 세슘으로 인한 토양오염은 주민의 거주 및 공업용지로의 재사용을 위해 제염이 불가피하다. 본 연구에서는 다양한 토양복원 기술 중 국내·외에서 실 제 방사성물질로 오염된 토양에 적용한 사례가 있는 토양세척 기술을 선정하였다. 토양세척 공정은 세척제를 사용하여 토양 과 세슘의 표면장력을 약화시켜 토양과 세슘을 분리하는 원리이다. 이러한 토양세척 공정의 세척수 재사용을 통해 공정효율 을 높이고자 세척수에 응집제를 적용하여 미세토양 및 세슘의 제거 성능 실험을 수행하였다. ICP-OES를 통해 세슘 수용액 에 토양을 첨가하여 세슘을 흡착시킨 후 응집제를 첨가하여 세슘의 농도를 측정하였으며 응집제 적용시 최대 세슘 제거율은 약 88%, 최소는 67%였다. Visual MINTEQ Code를 통한 세슘과 토양과의 종결합을 예측하였으며 탁도 측정을 통해 응집제 투여 후 탁도를 측정하여 세척수의 재사용 여부 및 미세토양 제거율을 분석하였다.

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by Fe2+ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.

This study was aimed at determining the changes in heavy metal removal efficiency at different acid concentrations in a micro-nanobubble soil washing system and pickling process that is used to dispose of heavy metals. For this purpose, the initial and final heavy metal concentrations were measured to calculate the heavy metal removal efficiency 5, 10, 20, 30, 60, and 120 min into the experiment. Soil contaminated by heavy metals and extracted from 0~15 cm below the surface of a vehicle junkyard in the city of U was used in the experiment. The extracted soil was air-dried for 24 h, after which a No. 10 (2 mm) was used as a filter to remove large particles and other substances from the soil as well as to even out the samples. As for the operating conditions, the air inflow rate in the micro-nano bubble soil washing system was fixed at 2 L/min,; with the concentration of hydrogen peroxide being adjusted to 5%, 10%, or 15%. The treatment lasted 120 min. The results showed that when the concentration of hydrogen peroxide was 5%, the efficiency of Zn removal was 27.4%, whereas those of Ni and Pb were 28.7% and 22.8%, respectively. When the concentration of hydrogen peroxide was 10%, the efficiency of Zn removal was 38.7%, whereas those of Ni and Pb were 42.6% and 28.6%, respectively. When the concentration of hydrogen peroxide was 15%, the efficiency of Zn removal was 49.7%, whereas those of Ni and Pb were 57.1% and 42.6%, respectively. Therefore, the efficiency of removal of all three heavy metals was the highest when the hydrogen peroxide concentration was 15%.

중금속에 의한 토양 오염이 국가적인 환경문제로 대두되면서 오염된 토양의 정화 기술 개발이 활발히 진행되고 있다. 최근 (구) 장항제련소의 중금속 오염부지에 대한 1차 정화사업이 완료되었고, 2차 사업이 진행되면서 토양세척기술이 가장 현실적인 중금속 오염 토양을 정화할 수 있는 기술로 인식되고 있다. 그러나, 토양세척공정은 75μm 미만의 미세토양에 대해서는 중금속의 화학적 추출이 거의 일어나지 않는다고 알려져 있어, 논토양과 같이 미세토 함량이 높은 부지에 대해서는 적용하더라도 그 효율이 낮아 폐기물로 버려지는 토양의 양이 많은 실정이다. 이에 본 연구에서는 미세토양에서 중금소의 추출 효율을 높이기 위해 중금속이 토양에서 어떠한 결합형태를 가지고 있는지와 중금속의 광물학적 특성을 고려하여 새로운 토양세척 공정을 제안하였다. 결합형태 분석을 통해 토양과 중금속의 결합강도에 대한 정보를 알 수 있으며, 기기분석을 통한 중금속의 광물학적 특성 분석을 통해 해당 중금속의 용해도에 대한 정보를 확인할 수 있다. 이 연구를 통해 제안된 공정을 비소, 납, 아연과 같은 중금속 오염 토양의 실험실 규모 정화에 적용하여 처리 효율 평가하였다. 비소의 경우 미세토만을 대상으로 실험한 결과 우려기준 이내로 정화할 수 있음을 확인하였다.

현재 토사재해 방재시설은 법적으로「사방사업법」,「국토의 계획 및 이용에 관한 법률」에 의한 사방시설이 있으나 대부분 산지 대책 중심이고, 실제로 피해를 받는 도심지에는「시설물의 안전관리에 관한 특별법」에 의한 일부 2종시설물이 있으나 다양한 대책이 미흡하고 관리기관이 명확하지 않아 현실적으로 그마저도 제대로 관리가 되지 않고 있는 실정이다. 이에 본 연구에서는 도심지 토사재해 방재시설에 대한 효율적 관리 및 장기간 사용을 도모하기 위해 도심지 토사재해 방재시설에 대한 생애주기별 업무프로세스를 정의하고 시설물 현황, 관리 이력, 문제점 등을 정량적, 통계적으로 파악하고 관리할 수 있는 항목을 설정하였다. 우선 토사재해 방재시설 현황분석을 통해 본 연구의 토사재해를 정의하였으며, 과거 피해지역의 토지이용 특성 분석을 통해 구분한 토사재해 공간적 범위를 적용하여 본 연구의 도심지 토사재해 방재시설을 정의 및 분류하였다. 또한 일반적인 생애주기단계를 토사재해 방재시설 측면에 적용하여 생애주기별 업무를 분석하고 도심지 토사재해 방재시설을 통합적으로 관리할 수 있는 생애주기별 관리항목 설정 및 관리방향, 업무프로세스를 도출하였다.

이 연구에서는 산지사면에서 측정된 토양수분의 상관관계 분석을 수행하고, 이를 통하여 사면에서 발생되는 수문과정의 이해를 도모하였다. 토양수분을 변화시키는 공통된 주요 수문기상인자인 강우의 추계학적인 특성을 토양수분의 시계열로부터 제거하고, 상관성 분석을 수행하였다. 경기도 파주 설마천 범륜사에 위치하고 있는 사면에서 2007년 8월 1일에서 27일 사이의 기간과 동년 9월 18일에서 10월 8일간의 기간에 토양수분 자료를 사용하여 분석을 수행하였고, 수