This study identified the characteristics of squid jig in korea waters by investigating the effect of color and luminous performance of squid jig on the catch of squid and experimenting the result of jig according to green jig or white jig, and whether using luminous or not were tested in the sea to improve the jig of squid jigging. For this purpose, a total of 13 sea experiments were conducted using T/S No. 2 Galmaegi. As a result, 341 squids were caught. Among them, 221 squids were caught by green jig (64.8%), 64 squids were caught by white jig (18.8%), 41 squids were caught by green luminous jig (13.8%), and nine squids were caught by white luminous jig (2.6%). The green jig commonly used in jigging vessel was most effective, and luminous jig was less effective than that non-luminous jig. The squids caught were Japanese flying squid (Todarodes pacificus), swordtip squid (Loligo edulis) and spear squid (Loligo bleekeri), and no significant characteristics were found according to the color of jig and the presence of luminous.

Squid is one of the important fisheries resources in Korea. Therefore, squid has been designated and managed as a target species of total allowable catch (TAC) since 2007, but the catch amount is gradually decreasing. The analysis was conducted to identify the change of relative fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the offshore squid jigging fishery from 1960s to 2010s. Gross tonnage per fishing vessel increased with the increase in size until 1990, but then gradually decreased to 41.0 tons in 2000 and 37.1 tons in 2010. The illuminating power (energy consumption) by fishing lamps increased to 180 kW in 2005 and stabilized to 120 kW in 2015. Jigging machine started to be supplied to fishing vessels from the early 1970s, and fish finders began to be supplied in the early 1980s and gradually increased. Therefore, the relative fishing power index in the offshore squid jigging fishery increased from 1.0 in 1980 to 1.1 in 1990, to 3.5 in 2000 and to 2.5 in 2010, but the increment rate slowed down gradually. The results are expected to contribute to reasonable fisheries stock management.

The aim of this study is to investigate influence of moon light to the fishing of squid jigging fishery in the southwest Atlantic Ocean based on analyses of date taken from 127 vessels in Falkland fishing ground by squid jigging fishery from 2010 to 2015. Catch and CPUE were analyzed between the new moon and full moon phases. Catches of the new moon phase were higher than those of the full moon phase by 7.6% and CPUE expressed in mt/day-vessels and mt/line-day were also higher by 18.2%, 18.2% respectively. However, as a result of statistical analysis at a significance level of p ＞ 0.05, no significant statistical differences in catch, mt/day-vessels and mt/line-day were found between the new moon and the full moon as a result of statistical analysis at a significance level of p ＞ 0.05.

The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.

In this study, a new designed propeller was applied on 24 ton class squid jigging vessel to reduce of fuel consumption. The selected squid jigging boat was under construction at the shipyard to determine the resistance of the hull through the model experiment. The propeller design was carried out by using the experimental data and ITTC procedures. Sea trials were performed by measuring the speed and the horsepower required by the condition of five power levels of engine load, namely 70%, 80%, 90%, MCR and maximum engine power. The speed and delivered horse power were compared between the conventional propeller and the new design propeller. Delivered horse power by installing the new propeller takes 90% engine load at start-up conducted by decreased 9.06%. The measuring speed is increased up to the 0.6 knots in the low-speed range to high range. This study showed that only the design and installation of a new propeller can improve the propulsion efficiency of the boats; furthermore, reduce fuel costs can be achieved at the same time by improving the increased cruising speed.

This study investigated luring distributions by water layer of common squid which were targeted by angling fishing vessels equipped with LED and metal-halide lamps using a scientific echosounder with a 120 kHz frequency in order to develop energy-effective underwater fish aggregation devices. In the analysis, angles of a transducer were changed from 0° to 45° and were rotated every 10° horizontally. It was shown that common squid were densely distributed from the surface to 40 m and they were also distributed in directions of 10°∼+30°, -30°∼-60°, and -120°∼-130°with the head of vessel as the center. Comparative results of angles of transducer on acoustical densities of common squid distributing in 21~40 m water depth showed an average 101.8 m2/nm2 in vertical direction of 0°, 12.3 m2/nm2 in angle of 30°, and 42.4 m2/nm2 in angle of 45°, respectively. It implied that more considerations on acoustic scattering strength by incidence angle direction of the transducer and swimming oriental angle direction of common squid would be required.

This study is aimed to analyze the three-dimensional underwater irradiance using an optical simulation software and to clarify the propriety and operation method under considering luminous intensity distribution of the luring lamp and penetrability in the seawater, when we use the light diffuser type 300W high powered LED and the metal halide lamp (MHL) on a coastal squid jigging vessel in the 10-ton class, simultaneously. For their attenuation characteristics of each wavelength in relation to the sea, LED lamp was to be effective in the 1.9-fold at 50 m depth and 2.1-fold at 80 m for underwater irradiance more than MHL according to the power consumption. In addition, the underwater irradiance distribution using the LED and MHL combination was rather increased even when reducing total power usage up to 20% depending on the simulation with changing the configuration and lighting angle of the lamp. These results can be utilized as an evaluation method of the operation and performance of the LED lamp according to adjusting its arrangement and lighting angle.

Fishing efficiency of the squid jigging vessel using the LED and metal halide fishing lamp combination was analyzed to reduce the cost for fishing operation utilizing the fishing light system for high degree of efficiency in the squid jigging fishery (one of the representative coastal and offshore fisheries in Korea). This study aims to improve the nature of existing LED lamps and to develop fan-shaped LED lights having 180W of power and ±45˚ angle of light intensity distribution. The marine experiment for making a comparison of their fishing efficiency was tested by a 9.77 tons fishing vessel from Oct. through Dec. 2012. As a result, experimental fishing vessel showed slightly higher fishing efficiency than the average of metal halide lamp-equipped vessel and 20% energy savings. This means that the combination of LED and metal halide lamps would provide an efficient way to lower energy consumption while maintaining fishing efficiency.

This study has conducted a comparative analysis on the fishing efficiency of LED fishing lamps by squid jigging vessels, the Yeongrak-ho (16 tons) and Somang-ho (9.77 tons), which operated during September and October 2010 and during October 2011, comparing with MH (Metal Halide) fishing lamp-equipped fishing vessels. This study has also examined vessel's fuel consumption level. The light powers of LED fishing lamps of the Yeongrak-ho and Somang-ho were 25.8kW and 32kW, respectively. Those of the MH fishing vessels, that is, the MH fishing lamp-equipped fishing vessels, were 105kW and 81kW, respectively. The average squid catch in number of an LED vessel, Yeongrak-ho, was 39.2% of the MH fishing lamp-equipped fishing vessels; however, that of the Somang-ho improved to 78.7% of the MH fishing lamp-equipped vessels. Average catch in number by Yeongrak-ho crew was 2.6 times more than catch in number by automatic jigging machines. Average catch in number by MH fishing vessel crew was 1.8 times more than that by automatic jigging machines. An LED vessel, Yeongrak-ho's fishing rate was 17.5%~152.2% of the MH fishing vessels, that is, 61.1% on average, in comparison of combined catch in number per automatic jigging machine and per crewmember. Somang-ho's fishing rate was 6.7%~127.6% of the MH fishing vessels, that is, 73.1% on average. The average fuel consumption level of the Somang-ho, throughout its departure from to arrival at the port, was 475.7l, and that during fishing hours was 109.6l, or 23.0% of the total fuel consumption level. Somang-ho's fuel consumption level per fishing hour was 9.7l on average.

Decoys for automatic jigging machines, the body part of a squid hook, have been developed in small and existing sizes in consideration of squid food, color blindness, and retinomotor responses and in utilization of pearl pigment, PP of high transparency, and combined mixture. In comparison of the developed silver-white decoy and existing decoys, the optical characteristics were examined, and the fishing performance of small size silver-white squid hooks was assessed in application of 4 fishing boats with the squid automatic jigging machine and metal halide fishing lamp in July, 2012. The luminances of the three squid hook colors-green, dark green and silver-white-increased as the intensity of illumination increased. Among these, the increase of silver-white was particularly distinguished. As to the average contrast of squid hooks, that of silver-white was 10.33, which was the highest, and then green 1.86 and dark green -0.10 in the order. As to the fishing performance of the silver-white hook, that of the 202 Geumyeong-ho and 101Yongjin-ho which caught squids were similar to that of the existing green hook and was relatively low in the case of the Dongbu-ho. However, that of the Haengbok-ho which caught relatively small squids whose average length was 19.9cm and installed silver-white hook in all automatic jigging machines was significantly excellent. In order to enhance the fishing performance of small size silver-white hooks, therefore, it would be effective to install in every automatic jigging machines of fishing boat and to start fishing before July by which small squids are caught.

The fuel cost of fishing lights for squid jigging fishing vessels takes about 30% of total fishing costs and over 65% of total fuel costs, which indicates the necessity of development of cost-reducing and high efficient fishing light system. This study aimed to analyze the economic effectiveness of LED fishing light systems in combination with metal halide lamp for the squid jigging fishery. Analytical results showed that the level of fishing profits of vessels using LED lights could be different with those of vessels using metal halide lights. That is, when a fuel cost could be reduced by 30%, fishing profits of vessels using LED lights might be the same as those of vessels using metal halide lights, and fishing profits of vessels using LED lights could be higher than those of vessels using metal halide lights when a fuel cost could be reduced by 50%.

To investigate the catches of squid jigging fishery, a series of fishing experiments was conducted in the high seas of the Northwest Pacific(40˚-43˚N, 150˚-155˚E) during the period of 1 August to 22 October 2005 by commercial fishing vessel. The number of 142 test fishing was carried out in the Northwest Pacific during 83days. The total catch were 47,524kg as 4 squid species and CPUE was 8.9kg/line·day. CPUE showed high values in the frontal zone during the survey. Main squid species caught from the experimental fishing were the neon flying squid, Ommastrephes bartrami(96.8%) and the boreopacific gonate squid, Gonatopsis borealis(3.2%). Dorsal mantle length of the neon flying squid were increased by the time and increasing of the hook size. Loss rate of the neon flying squid in the water showed the highest values in 28.2% compare to the others. And the loss rate of the front roller and in the air were 1.1% and 1.0%, respectively.

The transmittance properties of fishing lamp of the squid jigging vessel was investigated during nighttime operations in the Northwest Pacific on 21 and 29 September 2005. The metal halide lamps of white color(2.0kW×168) in the air and metal halide lamp of white color(10.0kW×1) in the underwater were used as a fishing lamp for gathering squids. The relative irradiance of metal halide lamp in the air showed peak in 850nm of wave length. The relationship between underwater illuminance(Y) and water depth(X) of metal halide lamp light in the observation areas is represented, Y=84.137e-0.1105X, R2=0.9974. The distribution of underwater illuminance of measure points St. 1-5 showed low value of 0.11x in 80m depth.

Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 ˚30'-43 ˚N, 152 ˚E-178 ˚W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3℃ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3℃ of temperature at the surface and about 10℃ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3℃ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.