간행물
수산해양기술연구 KCI 등재 Journal of the Korean Society of Fisheries and Ocean Technology 韓國漁業技術學會誌
- 발행기관 한국수산해양기술학회(구 한국어업기술학회)
- 자료유형 학술지
- 간기 계간
- ISSN 2671-9940 (Print)2671-9924 (Online)
- 수록기간 1965 ~ 2024
- 주제분류 농수해양 > 수산학 농수해양 분류의 다른 간행물
- 십진분류KDC 529DDC 639
권호리스트/논문검색
권호
42권 4호 (2006년 11월) 8건
1.
2006.11
구독 인증기관 무료, 개인회원 유료
To determine the relative efficiency and mesh selectivity of gill net for the Pacific saury, Cololabis saira, a series of fishing experiments was carried out in the Northwest Pacific Ocean from August 13 to October 13 in 2002, using gill nets of different mesh size(30, 33, 35, 37, 39 and 42mm) constructed from two kinds of twine material(monofilament, twisted multifilament nylon web). The relative efficiency of two material gears was expressed as the ratio obtained by dividing monofilament catch by multifilament catch in number. The master selection curve of each material gear was estimated by applying the extended Kitahara's method. The catch of experimental gears is mostly Pacific saury(98.6%), Cololabis saira. The kinds of bycatch are common squid(0.7%), Pacific mackerel(0.6%), etc. Catch comparisons in the two gears showed that monofilament nylon nets are 1.7 times more efficient. The optimum values in monofilament and multifilament gill net for Pacific saury are 8.28 and 8.23, respectively.
4,000원
2.
2006.11
구독 인증기관 무료, 개인회원 유료
This paper described the experimental squid jigging fishery conducted by a commercial fishing vessel in the Northwest Atlantic Ocean from August to October 2005. Author carried out experimental jiggings of 65 times during 57 days by three type of jigs which were pick jig, soft jig and soft luminous jig. The total catch, effort/day and catches/line-day of northern shortfin squid (Illex illecebrosus) were 12,726kg, 35 auto jigging machine and 3.5kg, respectively. Higher CUPE was observed in September, August and October. Catch ratio of pick jig was higher by 57-86% than those of soft jig and soft luminous jig. Higher catch was recorded at the 42˚55'N, 62˚10'W with surface temperature ranging 18-21℃. The range of the dorsal mantle length was from 13.5cm to 23.0cm with average 17.2cm for female and from 13.0cm to 20.0cm with average 17.0cm for male. Sex ratio showed 55.4% of female.
4,000원
3.
2006.11
구독 인증기관 무료, 개인회원 유료
The circle hook experiments were conducted to compare the catch rates of target and bycatch species between J hook and circle hooks in the tuna longline fishery of the eastern Pacific Ocean between 1˚48'S-7˚00'S and 142˚00'-149˚13'W from July 15 to August 12, 2005. In the target species group no significant differences among 3 types hook, between size 4.0 traditional tuna hooks(J-4) and size 15 circle hooks(C15), and between C15 and size 18 circle hooks(C18) were revealed, but significant differences were found between J-4 and C18. In the bycatch species group significant differences were found among 3 types hook, between J 4 and C15, and between J-4 and C18, but no significant differences were revealed between C15 and C18. Large circle hook(C18) had the lowest catch rate for tunas and for other fishes, and the small circle hook(C15) had lowest rate for billfishes and sharks. The length distributions for bigeye tuna are very similar for the 3 hook types. There were very slight differences in length size between hook types in the bycatch species.
4,000원
4.
2006.11
구독 인증기관 무료, 개인회원 유료
This research aims at establishing the application of canvas kite to the fishing gear through the analysis of the lift/drag tests of the kites have been performed in our previous finding. Now that several methodologies were designed to find the most effective triangular model as a buoyancy device applied to the fishing gear. Comparisons of drag/lift were made by installing the model in an installation frame instead of the prototype. Also, we have considered the application of canvas kite to the prototypic fishing gear by calculation using the result of this test. The results obtained from the above approaches are summarized as follows, where attack angle, lift coefficient, maximum lift coefficient and drag coefficient are denoted as B, CL, CLmax and CD respectively. The camber showed a gradual increase with an increase of fluid velocity. There was a big discrepancy in B=20 unlike B=30. Even if the kite retreats along the fluid flow, there is little relationship with the velocity variation. Lifts calculated with the kites were bigger and drags were smaller than those of the calculations with the float only. The kite as the buoyancy device will be very useful when the appropriate applications and the stability are met.
4,200원
5.
2006.11
구독 인증기관 무료, 개인회원 유료
The transmittance properties of fishing lamp of the squid jigging vessel was investigated during nighttime operations in the Northwest Pacific on 21 and 29 September 2005. The metal halide lamps of white color(2.0kW×168) in the air and metal halide lamp of white color(10.0kW×1) in the underwater were used as a fishing lamp for gathering squids. The relative irradiance of metal halide lamp in the air showed peak in 850nm of wave length. The relationship between underwater illuminance(Y) and water depth(X) of metal halide lamp light in the observation areas is represented, Y=84.137e-0.1105X, R2=0.9974. The distribution of underwater illuminance of measure points St. 1-5 showed low value of 0.11x in 80m depth.
4,000원
6.
2006.11
구독 인증기관 무료, 개인회원 유료
This paper introduces an auto-feeding system to exactly control the feeding time and the amount to cultured fishes in aquaculture industrial field. To reduce expensive costs or labors in this field, it was designed by the concept of controlling feed quantity exactly on the basis of fish's feeding behavior pattern in water tank. A feed control method of this system was developed for controlling feed amount by rotor capacity and motor rotated number. Moreover, a scattering section was selected by rotate way of propeller wing to scatter dried feed to designated site, and then, the diameter of its wing was 250mm and maximum scattering distance was 7.6m for 600rpm. Furthermore, the scattering ways were embodied 2 types such as a simplified way and a multistage shift way looks like a manual scattering. As a results, the multistage shift way is more effective to discharge the dried feed widely than the simple way in the water tank.
4,000원
7.
2006.11
구독 인증기관 무료, 개인회원 유료
The potential of ecosystem-based fisheries management is recently recognized to be very important to improve the sustainability of fisheries resources. Under the depressed condition of many fisheries resources, this recognition has been expanded and more effort has been taken to improve this approach. Taking ecosystem concept includes the use of other tools of management in addition to fisheries regulation, such as stock and productivity enhancement, provision of physical structure, or marine protected areas. In the ecosystem-based fisheries management approach, it would require to holistically consider ecological interactions of target species with predators, competitors, and prey species, the effects of climate on fisheries ecology, the complex interactions between fishes and their habitat, and the effects of fishing on fish stocks and their ecosystem. Fisheries management based upon the understanding of these factors can prevent significant and potentially irreversible changes in marine ecosystems caused by fishing. A useful approach for analyzing tropho-dynamic interactions and mass-balance in marine ecosystems is introduced to demonstrate the complexity and usefulness of the ecosystem approach, which was applied to a small ecosystem in Korea. Korea should seriously consider to take the ecosystem-based approach to fisheries management, since most major fish stocks are currently depleted due to many reasons such as overfishing, land reclamation and coastal pollution.
5,400원
8.
2006.11
구독 인증기관 무료, 개인회원 유료
In this study, the 2-way condensation system was designed applying air-to-air heat pump to dry a marine product such as squid in the winter. And to be made the drying apparatuses by this system, there are two kinds of type, A type, was set a compressor outside of the drying apparatus, B type, was set a compressor in the drying room. And then the variations of temperature in drying room were measured to compare the heating performance of the drying apparatuses between A type and B type at -6.5℃, outdoor temperature. The temperature of the drying room for B type was increased to 36℃ but the temperature of the drying room for A type was not increased to 36℃, to be increased to 20℃.
4,000원
