간행물
수산해양기술연구 KCI 등재 Journal of the Korean Society of Fisheries and Ocean Technology 韓國漁業技術學會誌
- 발행기관 한국수산해양기술학회(구 한국어업기술학회)
- 자료유형 학술지
- 간기 계간
- ISSN 2671-9940 (Print)2671-9924 (Online)
- 수록기간 1965 ~ 2024
- 주제분류 농수해양 > 수산학 농수해양 분류의 다른 간행물
- 십진분류KDC 529DDC 639
권호리스트/논문검색
권호
55권 2호 (2019년 5월) 9건
Original Article
1.
2019.05
구독 인증기관 무료, 개인회원 유료
This study is aimed to take a stock assessment of blackthroat seaperch Doederleinia seaperch regarding the fishing effort of large-powered Danish Seine Fishery and Southwest Sea Danish Seine Fishery. For the assessment, the state-space model was implemented and the standardized catch per unit effort (CPUE) of large powered Danish Seine Fishery and Southwest Sea Danish Seine Fishery which is necessary for the model was estimated with generalized linear model (GLM). The model was adequate for stock assessment because its r-square value was 0.99 and root mean square error (RMSE) value was 0.003. According to the model with 95% confidence interval, maximum sustainable yield (MSY) of Blackthroat seaperch is from 2,634 to 6,765 ton and carrying capacity (K) is between 33,180 and 62,820. Also, the catchability coefficient (q) is between 2.14E-06 and 3.95E-06 and intrinsic growth rate (r) is between 0.31 and 0.72.
4,000원
2.
2019.05
구독 인증기관 무료, 개인회원 유료
The species composition and abundance variations of fishery resources in the adjacent marine ranching area, Tongyeong, Korea, were investigated by shrimp trawl, gill net, and longline during the period of July, September, and October in 2016. During the study period, the total catch were 8,522.9 kg with 34 species from the shrimp trawl, 32 species from the gill net, and nine species from the longline. The dominant species were different by gear, which were Hypodytes rubripinnis and Parapercis sexfasciata in the shrimp trawl, Platycephalus indicus and Raja kenojei in the gill net, and Conger myriaster and Scomber Japonicus in the longline. In terms of spatial distribution, Yongchodo showed the highest total catch in number as well as of in weight while Jukdo showed the lowest total catch in number and Bijindo showed the lowest total catch in weight. The amount of demersal fish resources in the survey area estimated as 301 ha, was 99,396 individuals which was converted to be 8,552.9 kg. The amount of demersal fish resources by gear were of trawling area, which area is 127 ha, were 76,251 and 3,489.5 kg, 74 ha in the gill net and longline survey area was 16,213 and 3,457.3 kg, and the other 100 ha area was 6,932 and 1,606.1 kg. In this study, the minimum resources for demersal fish is 61,687 and 4,265.2 kg, and the maximum is 149,439 and 14,197.9 kg.
4,900원
3.
2019.05
구독 인증기관 무료, 개인회원 유료
Various artificial reefs provide the fish habitat and nursery, and contribute the improvement of fisheries productivity. The evaluation methods of fishery resources in the artificial reefs have been done by fishing, scuba diving, underwater camera, and scientific echo sounder/sonar. There are a number of studies using echosounders on the quantitative and qualitative evaluations of artificial reefs in various seas around the world. This study focused on the spatial distribution of fishes around artificial reefs and the influential area of reefs off Bukchon, Jeju Island. Not only acoustic data but also various properties of artificial reefs were used in the geographic information system to extract relevant results. As a result, the major material of reefs on this study site was concrete and the number of reefs with that material was the most. The volume of reefs consisted of steel only and steel with riprap was considerably large compared to other reefs. The average NASC in the vertical distribution of fishes in artificial reefs was 31.6 m2/nm2 in April, and that was 61.3 m2/nm2 in June. The distance between the fish school and their nearest reef in June morning had a wide range from 750 to 3250 m. On the basis of the influence ray of artificial reefs, it had a tendancy of NASC to decrease with distance from the reef in the June morning. It is a preliminary study to present the geospatial analysis example to understand a better way of comprehensive artificial reef environments.
4,000원
4.
2019.05
구독 인증기관 무료, 개인회원 유료
This study was conducted to investigate the effects of underwater noise caused by pile driving during marine construction on fish. In this study, the three gray rockfish were released about 1 km away from the construction site of wind power generation on July 18, 2018 and traced using two acoustic telemetry techniques. The behavior of the fish was analyzed by calculating the moving distance, swimming speed and direction of the gray rockfish. In the results of the acoustic tracking using the ship, the rockfish moved about 2.11 km for about two hours at a speed of 0.28 ± 0.14 m/s (0.94 TL/s). The bottom depth of the trajectory of the rockfish was 1.0 ± 0.6 m on average. There was a significant directionality in swimming direction of the gray rockfish, and there was no significant correlation between the swimming direction and tidal current direction. Moving distance during 5 minutes (5MD) during pile driving and finishing operations between rock surface and bedrock were 0.94-0.96 times (76.0-77.0 m) and 1.81-2.73 times (146.0-219.5 m), respectively, compared with no pile driving. This study is expected to be used as a basic data of fish behavior research on underwater noise.
4,000원
5.
2019.05
구독 인증기관 무료, 개인회원 유료
The purpose of this paper is to explore the fishing grounds of trawl fishery, which are operating in the waters around Jeju Island, and to investigate the monthly shifting changes of the explored fishing grounds. Information on AIS of fishing vessels operating near Jeju Island was collected and analyzed from October 16, 2016 to October 16, 2017. Thus, the location of fishing vessels with the same operational characteristics as those in this industry was extracted and displayed on Google Maps' location drawings to analyze the dense distribution of fishing vessels according to the frequency of their appearance. In the distribution of fishing vessels that appeared in October, a wide range of fishing grounds connecting the upper and lower waters of the 221 and 222 sea of fishing area was found to have gradually expanded and increased density, showing the widest range and highest density in December, and then gradually decreasing from January 2017 to near extinction in May. The distribution of fishing vessels that appeared in the left and lower waters of the 243 sea estuary increased not only in November and December, but also in the appearing sea areas gradually moved to the 242 sea and the range of their appearance was extended to the 241 sea. In other words, the highly dense fishing area in December indirectly shows that it is winter fishing grounds for these industries. The distribution of these dense fishing vessels gradually moved north and west with each passing day, reducing their density and reaching a near extinction in August. However, in September, the density was gradually restored again. Fishing vessels that appeared in high density in the northern waters of the 224 sea east of the Yeoseo island in December were thought to be fishing vessels, whose density decreased over time, almost disappeared in May, and reappeared in July and August, showing a certain degree of density, and then decreased again.
4,000원
6.
2019.05
구독 인증기관 무료, 개인회원 유료
The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher’s safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher’s occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.
4,000원
7.
2019.05
구독 인증기관 무료, 개인회원 유료
This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper’s work, escaping from transferring the responsibility of ship collision to the skipper completely.
4,000원
8.
2019.05
구독 인증기관 무료, 개인회원 유료
This study is aimed to develop an improved shellfish dredge vessel considering the increase of the fishing safety and welfare of fishermen in Jeonnam province. We visited five fishing village societies in Korea, and conducted field surveys and survey questions to investigate the current status. In order to solve the problems presented by the investigation, a general arrangement of the improvement vessel was written and adopted after meeting between the fishermen and research team, and calculated the initial stability in five loading conditions by using the Napa program. As a result of field surveys and survey questions, the existing vessel have buoyant materials under the bow and the warp pass through the wheel-house. In addition, most fishing equipment and nets are concentrated on a narrow stern, making it difficult to work efficiently. According to the survey, fishermen also responded that operation of casting and hauling is very inconvenient. The fishing equipment of the improvement vessel was rearranged, the size of the wheel-house and the crew room was increased, and we secured a basic welfare space. As a result of the initial stability test, the stability criteria of the fishing vessel were satisfied in all loading condition.
4,000원
9.
2019.05
구독 인증기관 무료, 개인회원 유료
In this study, a ship motion control system design method is introduced for autonomous ships. Some related research results and technologies for autonomous ships have already been developed and applied to testing ships. Recently, the Norwegian Maritime Authority and the Coastal Administration have signed an agreement and started to test autonomous ships in the defined area. Considering recent technology trends and background, in this paper, the authors also try to develop autonomous ship control technologies. In the designed control system, an observer is introduced to estimate unmeasurable system states. Based on the servosystem with state estimator, ship motion control experiment is performed to evaluate control performance using a model ship in water basin.
4,000원
