간행물
수산해양기술연구 KCI 등재 Journal of the Korean Society of Fisheries and Ocean Technology 韓國漁業技術學會誌
- 발행기관 한국수산해양기술학회(구 한국어업기술학회)
- 자료유형 학술지
- 간기 계간
- ISSN 2671-9940 (Print)2671-9924 (Online)
- 수록기간 1965 ~ 2024
- 주제분류 농수해양 > 수산학 농수해양 분류의 다른 간행물
- 십진분류KDC 529DDC 639
권호리스트/논문검색
권호
47권 1호 (2011년 2월) 6건
1.
2011.02
구독 인증기관 무료, 개인회원 유료
In order to investigate the cause and magnitude of scale effect occurring in the model experiments of fishing nets, five pairs of Nylon pyramid nets and one pair of PE ones in which all the two nets paired were equal each other in the factors determining their flow resistance, i. e., the ratio d/l of diameter d to length l of bars, the angle f between two adjacent bars, the attack angle q of nettings to the water flow, and the wall area S of nets, and different in the values of d and l were prepared. Then, the nets were attached to the circular steel frame alternately and their flow resistances with shapes in water were measured on the sea ascribing no turbulent flows by using the tension meter made of a block bearing for the experiment. All the Nylon nets were spreads out easily in water to form a circular cone at relatively low velocity of water and showed the resistance smaller a little in the nets with larger d and l than them with smaller d and l, because the filtration of water through meshes become easier in nets especially with larger l. But PE nettings were not spread out sufficiently on account of their small flexibility and showed higher resistance especially in them with thicker twines. Therefore, the difference in bar length or mesh size and flexibility of nettings between prototype and model nets are regarded to become factors ascribing scale effect. Especially the influence of the difference in mesh size may become large significantly in actual model experiments because the mesh size of model nets is decided at much larger value than that given by scale ratio and so the difference of mesh size between the two nets become much larger than that between nets used in this experiment.
4,000원
2.
2011.02
구독 인증기관 무료, 개인회원 유료
Biodegradable octopus pot was developed to reduce plastic pollution problem in the sea and fishing trouble between fishermen. It can be expect to recycle other wasted biodegrade fishing gear. Experimental fishing was carried out to understand the difference in fishing efficiency between Polyethylene (PE) octopus pots and biodegradable (Polybutylene Succinate and Polybutylene adipate-co-terephthalate) octopus pots which was tried to make in this study in the sea. There were caught by 237 numbers of fishing during the experimental period. Among the 237 numbers of fishing, 160 or 67.5% were PE pots which were more than the biodegradable pots. A comparison of the monthly catches between the PE pots and biodegradable pots shows that the catches were overall higher in the PE pots than in the other pots. The result is very similar with the comparison of total catches by each type of the pots. In terms of bycatch, the number of species, amount of catches and the number of fishing with bycatch were more significant in the biodegradable pots than in the PE pots.
4,000원
3.
2011.02
구독 인증기관 무료, 개인회원 유료
This study is to contribute to income growth of fishermen by the common octopus fishery characterized in the Tando Bay on the southwest coast of Korea. This area is engaged in Longline fishing (301 persons), Shovel fishing (196 persons), Trap fishing (14 persons) and Torch light fishing (40 persons) in 2008. Population who is joined in the spring becomes main fishery target population of longline fishery in the fall because entering fishing ground in August, and is joined in the fall becomes main fishery target population of longline fishery in the spring because entering fishing ground in December. Average size of common octopus examined by longline 6.26cm, 5.82cm for Shovel fishing, 8.09cm for trap, and expressed big difference by fishery. It needs necessary various kinds of Octopus resource management actions and methods in continuous use. Specially, Fishing force increased by fishing automation system, so the reduction of fishing force is needed to increased by fishing force. Government support and fishermen's self-conscious of resource management is needed.
4,000원
4.
2011.02
구독 인증기관 무료, 개인회원 유료
Squid by-product like viscera has just been recognized as one of the serious pollutants on the surrounding marine environment in Ulleung island of Korea. The effect as a marine pollutant, however, has not been examined and evaluated properly. It was carried out the comprehensive examination of the marine pollution by disposing squid by-products. The sediments and water qualities were investigated in several positions, including the dumping position around Ulleung island. It is also estimated a spreading of by-product in terms of estimating the sinking speed and evaluating the attracting characteristics as a feed. As a result, There were no significant pollutions of the sediment and water quality. The spreading of by-product by the local current was 2-2.5 times of the depth, and it will become longer in spring tide. It was confirmed that the squid by-product has attracting ability for local fish by acoustical survey. Furthermore, it can be useful for the local fish species as feeds.
4,000원
5.
2011.02
구독 인증기관 무료, 개인회원 유료
Reduction of ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargo as well as improving the comfort of the ride. It is a common experience for mariners, to see that steering with a rudder generally induces rolling of the ship, though the original aim of the rudder is to keep the ship's heading to the required course. At the first stage, when a rudder is steered, usually a ship heels in an inward direction, due to the roll moment acting on the rudder. At the next stage in steering, the main heel may change to an outward. This coupling between rudder and roll motion has become an attractive problem from the point of view of roll stabilization using the rudder, because it is a natural in sight that if the rudder action is skillfully related to the change of roll as well as to the course deviation, the roll can be reduced to a certain degree. The main aim of this paper is to discuss the results of the actual full-scale sea trials carried out on steer gear No.1 and No.1 2, the individual quartermaster and to make clear their statistical properties, using the actual data which included measurement of roll angle, roll rate and the comparative tests were carried out immediately after each other, in order to minimize any statistical variation in sea conditions. It can be concluded that the steer gear No. 1 2 reduced the roll motion on average by about 21% in comparison with the No.1 and confirmed the some difference as per a ability of quarter-master's maneuver.
4,000원
6.
2011.02
구독 인증기관 무료, 개인회원 유료
A steady-state analysis and a simple dynamic model as simplified methods are developed, and results of energy consumption loads are compared with results obtained using computer to evaluate the analytical solution. Before obtaining simplified model a mathematical model is formulated for the effect of wall mass on the thermal performance of four different houses having various wall construction. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equation for wall temperature profiles and room air temperatures is obtained using the Laplace transform method. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from four different locations in the United States: Albuquerque, New mexico; Miami, Florida; Santa Maria, California; and Washington D.C. for both winter and summer conditions. The steady state analysis that does not include the effect of thermal mass can provide an accurate estimate of energy consumption in most cases except for houses #2 and #4 in mild weather areas. This result shows that there is an effect of mass on the thermal performance of heavily constructed house in mild weather conditions. The simple dynamic model is applicable for high cycling rates and accurate values of inside wall temperature and ambient air temperature.
4,500원
