This study investigated the effects of polymer blends on the performance and durability of laver drying plates by developing four prototype types. After evaluating their physical and mechanical properties, field application experiments were conducted under actual laver production conditions. Laver residue remaining on discarded plates was quantitatively analyzed using a machine vision system while chemical stability and surface roughness changes were evaluated through FT-IR spectroscopy and profilometry. Accelerated weathering tests were also performed under simulated drying conditions to examine thermal aging effects. The results showed that all prototype plates exhibited a 1.2-to-1.9-fold increase in abrasion resistance compared with the commercial product, indicating that polymer blending effectively enhanced mechanical durability. FT-IR and DSC analyses revealed negligible chemical and thermal changes after field application and accelerated weathering tests, suggesting that performance degradation was primarily caused by physical surface damage rather than material decomposition. Furthermore, laver residue accumulation was governed more significantly by the contact angle than by physical surface roughness, exhibiting a low residue area of less than 3% at a specific contact angle range of 71°-72°. These findings suggest that future laver drying plate designs should prioritize interfacial control to improve detachment efficiency and extend service life.
This study classified environmental regimes at inferred fishing locations of the Korean large purse seine fishery by integrating automatic identification system-based fishing activity data from Global Fishing Watch with public marine environmental data. Temperature and salinity from GOFS3.1 and gridded NIFS serial oceanographic observations, together with MODIS-Aqua chlorophyll a, were matched to fishing locations from 2021 to 2023. Correlation, principal component, and variance inflation factor analyses identified temperature and salinity at 30 m depth and chlorophyll a as representative variables. Seasonal Gaussian mixture models identified five clusters for each environmental dataset, which were integrated into four meta-groups using Ward’s hierarchical clustering. The meta-groups represented low-temperature/high-chlorophyll a, stable, high-temperature/low-salinity, and high-temperature/high-salinity conditions. Spatial similarity between datasets varied among meta-groups, with Pearson correlations of 0.438-0.643 and Top 10% Jaccard indices of 0.303-0.524. Major distribution areas were broadly consistent around southeastern Korea, the Korea Strait, and Jeju Island. These results support the complementary use of public marine environmental data for classifying environmental conditions at fishing locations. Since species-specific catch data were unavailable, the meta-groups should be interpreted as environmental regimes rather than species-specific fishing grounds.
Small barges used for remote avian monitoring in coastal aquaculture farms suffer from pitching motions induced by waves, which cause camera motion blur and degrade object identification rates. This study aims to control the free motion of the barge to ensure the stability of camera images and mitigate motion blur. To maintain the reliability of high-resolution images (dynamic MTF of 0.9 or higher), the allowable pitching angular velocity was calculated as 0.415 deg/s. Computational fluid dynamics (CFD) was utilized to analyze the hull responses according to wave heights (0.1-0.3 m) and wave periods (2-4 s), and to evaluate the control performance of a linear damping system. Without the damper, the maximum angular velocity reached 2.908 deg/s under short-period (2 s) extreme waves, exceeding the allowable limit. When the damper was applied, the angular velocity was suppressed to 0.408 deg/s even under the same harsh conditions, satisfying the target criterion. It was confirmed that as the period increased, the control stability further improved, securing an overwhelming margin of safety against external disturbances. The damping system effectively absorbs vibrations that cause motion blur and can be a practical alternative to enhance the optical stability of remote aquaculture monitoring systems.
This study investigates the reproducibility and variability of ship maneuverability for three sister fishery training vessels of 2,996-ton, all built to the same design, by comparing and analyzing their full-scale sea trial results according to the IMO MSC 137(76) standards. Turning test results demonstrated that the advance and tactical diameter remained within sufficient safety margins compared to IMO criteria, with limited variations between vessels (0.1-0.3 L), confirming high design reproducibility. In the zig-zag tests, which evaluate transient response, the steering gear hydraulic pump operation mode (one-pump vs. two-pump) was identified as a critical factor for steering efficiency. Specifically, the performance deviations observed under one-pump operation were significantly mitigated by two-pump parallel operation, which enhanced steering torque and response speed. This resulted in a reduction of more than 50% in the inter-vessel deviation of the first overshoot angle, allowing all vessels to stably satisfy the IMO criteria. During stopping tests, while some variability in track reach was observed due to environmental disturbances and initial speed differences, the sister ships exhibited consistent braking response characteristics. This study quantitatively establishes that steering operational variables significantly affect performance reproducibility even within identical ship designs. The findings provide empirical evidence to strengthen the reliability of maneuverability prediction, design verification, and operational assessments for sister ships.
Catch, gear, and deck loads on a fishing vessel may change in quantity and distribution, and lines, gear, and anchor cables may transmit external forces, so stability at departure or ship-handling immediately before an accident may not fully explain capsizing. This study aimed to extract stability-related risk factors from verdict narratives and to compare their configurations across cases. We purposively selected thirteen Korea Maritime Safety Tribunal (KMST) verdicts with relatively clear descriptions of stability deterioration. Keeping the legal cause findings unchanged, we used directed qualitative content analysis to code accident development along two routes: reduction in restoring capacity (Route I) and line- and gear-mediated external force (Route II). Route I comprised degraded loading condition (A), moving weight (B), and flooding, drainage failure, and free-surface effect (C); Route II comprised line- and gear-mediated external force (D). We treated ship-handling and environmental conditions as background rather than separate types. Legal cause findings and risk types did not correspond one to one. Two accidents attributed to imprudent hauling were coded C and D, and B and D, respectively; D also appeared under different legal cause findings. In the selected cases the two routes did not always coexist, and cases coded on both routes did not have higher combined numbers of deaths and missing persons than single-route cases. The classification does not replace KMST causal determinations, but it can differentiate inspection priorities among accidents sharing a legal cause. For types A, B, and C, crews can directly check loading height and position, securing, and drainage before and after fishing operations and address them through onboard inspection and training. For type D, crews can inspect equipment condition and work procedures, but cannot judge load magnitude or its effect on stability by eye alone. Line tension over time, the direction and point of application of the force, and GM, GZ, and heel angle by loading condition, therefore, need to be confirmed by measurement and calculation. This study organizes the accident development described in verdicts into risk types and presents an analytical framework for type-specific inspection and follow-up measurement.
This study compared casualty patterns between general fishing vessels and recreational fishing vessels to examine accident-type differences in human casualties. Marine accident data for 2021-2025 were obtained from the Korea Maritime Safety Tribunal. Casualty intensity (CI) for fatalities and missing persons combined and for injuries was calculated as the mean number of casualties per vessel in which the corresponding casualty category occurred. The relative casualty concentration index (RCCI) was calculated as the ratio of each accident type’s casualty share in recreational fishing vessels to that in general fishing vessels. Recreational fishing vessels accounted for 15.4% of vessels involved in accidents, but 29.5% of casualties. Human casualties per 100 accident-involved vessels were 14.91 for general fishing vessels and 34.28 for recreational fishing vessels, a 2.3-fold difference. Corresponding fatality and missing-person CI values were 1.31 and 1.56 persons/vessel, and injury CI values were 1.35 and 4.59, respectively. Collisions, groundings, and contacts accounted for 91.9% of recreational fishing vessel casualties. Injury CI values for contacts, groundings, and collisions were 8.86, 4.69, and 4.68 persons/vessel, respectively; the corresponding RCCI values were 22.84, 9.58, and 1.64. Collisions were prominent in terms of absolute casualty burden and CI while contacts and groundings showed high injury CI and relative casualty concentration. Together, CI and RCCI provide baseline information for interpreting accident-type casualty characteristics and reviewing safety management measures.
This study conducted an exploratory single-case study on a public maritime education agency (Agency A) to examine the practical reorganization process of the business continuity management system (BCMS) training framework. By analyzing risk assessment (RA) data (2024-2026) and simulation exercise results (2023-2026), this study explored changes in organizational risk perception and the subsequent evolution of training strategies. The RA analysis revealed a shift in priority threats-from typhoons to safety accidents, extreme heat, and technical disruptions-reflecting recent changes in the climate and regulatory environments. Furthermore, a review of early simulation exercises highlighted the structural limitations of conventional training where repetitive, full-staff evacuation drills and uniform tabletop discussions induced participant fatigue and lowered practical engagement. To address these limitations, the institution implemented a two-track framework, separating executive decision-making tabletop exercises from action-oriented practical drills for field staff. For example, field staff engaged in practical drills involving the direct operation of emergency equipment in cooperation with external specialized agencies. Rather than statistically proving causal effectiveness, this study illustrates how aligning customized scenarios with RA results and restructuring emergency organizations to fit specific roles can improve the practical relevance of BCMS exercises. It provides practical implications for public institutions seeking to establish a flexible and sustainable training feedback loop.
The National Institute of Fisheries Science is developing a vibration-based anomaly detection system for small fishing vessel engine rooms. Since the fault types that can occur in such engines are highly diverse and fault-labeled data are difficult to collect for every type, the system is designed to learn the range of normal operating signals and flag deviations from that range as anomalies rather than learning each fault type individually. This normal-data-based approach requires a reliable way to define and measure the normal operating state, and engine speed (RPM) is the most basic such variable. As part of this effort, this study proposes a deep-learning method that estimates RPM directly from engine-room vibration and simultaneously classifies the accelerometer mounting position, using only magnet-mounted accelerometers that require no engine modification, and quantifies which mounting position most clearly captures this normal signal. Four-channel vibration signals were measured on a 9.77-ton coastal purse seiner with an inline-six marine diesel engine whose speed ranged 447-1,444 RPM during the sea trial off Tongyeong, Korea. Hilbert-envelope spectrograms (0-100 Hz) of the four channels were fed into an attention-branch convolutional network with approximately 0.39 M parameters, trained in two stages for RPM regression and position classification. The proposed method achieved a mean absolute error of 42.9 ± 2.1 RPM (about 5% relative error; RMSE 66.3 RPM, = 0.935 for the representative model) and a position classification accuracy of 99.6% on the time-sequential test set. Ablation experiments showed that the envelope demodulation and the 100-Hz bandwidth, which covers the firing frequency and up to the 13th rotational harmonic, were the dominant factors. The learned attention weights were highest for the channel near the power-transmission end of the engine and varied with the operating range, indicating which position most reliably captures the normal signal under each condition and demonstrating the benefit of adaptive multi-channel fusion.