최근 나노 버블 수의 건설 산업에 적용한 효과에 대하여 검증하고자 나노 버블 수를 혼입한 모르타르의 물리적 특성에 관한 연구를 진행하였으며 산소 및 이산화탄소 기체를 이용하여 나노 버블 수를 사용하였다. 모르타르의 물리적 성능을 비교하기 위하여 응결 시험과 압축강도 시험을 진행하였으며 응결 시간 내 열중량 분석을 통하여 응결 시험의 원인을 분석하고자 하였다. 본 연구 결과로써 산소 나노 버블 수를 사용하였을 경우 모르타르의 미세 응결촉진을 가져왔으며 이산화탄소 나노 버블 수를 사용한 경우 응결시간의 지연이 유의미하게 나타났다. 또한 실험한 기체의 종류에 관계 없이 강도가 증가 하였으며 응결 지연 여부와 관계없이 조기강도가 증가함을 확인하였다. 추가적인 공극구조 및 수화물 구조 분석에 관한 연구가 필요하지만 나노 버블 수가 건설 산업에 긍정적인 영향을 미칠 것으로 판단된다.

세계적으로 환경에 대한 관심이 커지면서, 탄소 저감 및 탄소 중립을 위한 다양한 연구들이 진행되고 있다. 특히 최 근에는 탄소 포집 및 저장 기술인 CCS(Carbon Capture and Storage)에 주목이 높아졌다. 그뿐만 아니라, 대기 중의 탄소를 효과 적으로 저장하는 특성을 가진 바이오차는 탄소 중립에 기여할 수 있는 방안으로 다양한 연구가 진행되고 있다. 건설 산업에서 는 시멘트 대체재를 활용한 탄소 감소 관련 연구가 진행 중이며, 본 연구에서는 바이오차를 콘크리트 및 모르타르의 시멘트 대 체재로 활용하여 시멘트 사용량을 줄이고, 동시에 콘크리트 및 모르타르 내의 탄소를 포집하고 저장하여 탄소 배출량을 감소시 키고자 한다. 이를 위해 바이오차의 시멘트 치환율을 0%, 10%, 20%로 설정하고, 각각의 경우에 대해 콘크리트 및 모르타르의 슬럼프, pH 농도, 그리고 압축강도를 비교하였다.실험 결과에 따르면, 바이오차의 시멘트 치환율이 증가함에 따라 슬럼프와 압 축강도가 감소하는 경향을 보였으며, pH는 유사한 양상을 나타냈다.

미세구조 특성의 불확실성은 재료 특성에 많은 영향을 준다. 시멘트 기반 재료의 공극 분포 특성은 재료의 역학적 특성에 큰 영향을 미치며, 재료에 랜덤하게 분포되어 있는 많은 공극은 재료의 물성 예측을 어렵게 한다. 공극의 특성 분석과 재료 응답 간의 상관관계 규명에 대한 기존 연구는 통계적 관계 분석에 국한되어 있으며, 그 상관관계가 아직 명확히 규명되어 있지 않다. 본 연구에서는 합성곱 신경망(CNN, convolutional neural network)을 활용한 이미지 기반 데이터 접근법을 통해 시멘트 기반 재료의 역학적 응답을 예측하 고, 공극분포와 재료 응답의 상관관계를 분석하였다. 머신러닝을 위한 데이터는 고해상도 마이크로-CT 이미지와 시멘트 기반 재료의 물성(인장강도)로 구성하였다. 재료의 메시 구조 특성을 분석하였으며, 재료의 응답은 상장균열모델(phase-field fracture model)에 기 반을 둔 2D 직접 인장(direct tension) 유한요소해석 시뮬레이션을 활용하여 평가하였다. 입력 이미지 영역의 기여도를 분석하여 시편 에서 재료 응답 예측에 가장 큰 영향을 미치는 영역을 CNN을 통하여 식별하였다. CNN 과정 중 활성 영역과 공극분포를 비교 분석하 여 공극분포특성과 재료 응답의 상관관계를 분석하여 제시하였다.

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.

Nuclear inspection is necessary to verify nuclear activities. If North Korea takes denuclearization, North Korea’s nuclear materials should be verified through non-destructive testing and destructive testing for nuclear material production. Since destructive testing of all substances is impossible, nondestructive testing is essential. Most non-destructive tests are performed by measuring the energy of gamma rays, but the characteristics of nuclear fuel can be evaluated by measuring neutron sources when enclosed with thick shields and when shielding structures are difficult to remove. Before the neutron source evaluation of MAGNOX used by North Korea, the relative characteristics will be evaluated later by analyzing the burnup, enrichment, and cooling time of the spent nuclear fuels discharged from the domestic nuclear power plant. This study evaluated the source strength and major nuclides according to burnup for the WH17×17 nuclear fuel assembly. The depletion calculation was conducted using SCALE 6.2 ORIGEN, and 3.5wt% enrichment, 10, 20, 30, 40, 50, 60 MWd/kg burnup, and five years cooling time, the minimum requirement for transport specified in the notice of the Nuclear Safety Commission, was applied. Although the impact assessment on enrichment should be evaluated with MCNP Tally to consider the fission reaction of the generated neutrons, this study only evaluated the spontaneous fission and (a, n) reactions that occurred first because it only evaluates the burnup impact. As burnup increased, neutron generation increased, and most of the total neutron strength occurred through spontaneous fission from the 10 MWd/kg burnup step. The influence of Pu-240 nuclides was dominant in the 10 MWd/kg burnup step but most neutrons were generated in tiny amounts of Cm- 244 generated from 20 MWd/kg burnup. Since DPRK’s 5 MWe Yongbyon MAGNOX has very low burnup (about 0.7 MWd/kg), the primary neutron sources of 10 MWd/kg, Am-241 and Pu isotopes, especially Pu-240, are expected to be used as indicators for evaluating spent nuclear fuel characteristics. If only specific nuclides are evaluated as major neutron sources at lower burnup than those evaluated in this study, in that case, the accuracy of non-destructive testing can be improved. Additionally, the evaluation according to the enrichment and cooling time should be considered as well.

In this paper, based on the existing research, we define the parameters for the number of ignition devices to be applied to the pyrovalve, the operation and airtightness according to the temperature, the material of the nipple and the thickness of the fractured part, and ANSYS Ver. 19.2 was used to analyze the FEA model, and a comparative analysis was conducted through structure analysis according to the piston shape of the pyrovalve. In addition, an experimental study was conducted by manufacturing a prototype according to the design variables. As a result, high-strength pyrovalves can stably supply working fluids such as fuel and oxidizer for space launch vehicle propulsion engines, as well as precisely control flow path switching was confirmed.

The bead geometry according to the welding conditions was analyzed through the laser fillet welding experiment of 9% Ni steel, and the relationship between the shear strength and the five bead geometry measured by selecting the main bead geometry of the fillet weld was analyzed. Among the welding conditions, the welding conditions that directly affect the penetration depth are welding speed and laser power, and the working angle and beam position have a great influence on the formation of leg of vertical and horizontal members. The bead shape, which greatly affects the shear strength, is the horizontal member length, neck thickness, and weld length, and has a proportional relationship with the shear strength. As a result of confirming the relationship between shear strength and bead shape through the derivation of the trend line, it was confirmed that the length of the vertical member, whose R2 value was 0.92, was most closely related to the shear strength.

Lead free (Ba0.7Ca0.3) TiO3 thick films with nano-sized grains are prepared using an aerosol deposition (AD) method at room temperature. The crystallinity of the AD thick films is enhanced by a post annealing process. Contrary to the sharp phase transition of bulk ceramics that has been reported, AD films show broad phase transition behaviors due to the nanosized grains. The polarization-electric hysteresis loop of annealed AD film shows ferroelectric behaviors. With an increase in annealing temperature, the saturation polarization increases because of an increase in crystallinity. However, the remnant polarization and cohesive field are not affected by the annealing temperature. BCT AD thick films annealed at 700 ℃/2h have an energy density of 1.84 J/cm3 and a charge-discharge efficiency of 69.9%, which is much higher than those of bulk ceramic with the same composition. The higher energy storage properties are likely due to the increase in the breakdown field from a large number of grain boundaries of nano-sized grains.

Generally, asphalt binder experiences short-term aging during mixing and constructing processes in high temperature environments and long-term aging during the service life after opening the road. Binder aging inside asphalt mixtures incurs changes in strength of asphalt paved roads, which then changes physical properties of the mixture such as cracks and rutting resistance. This study aims to measure bond strength of aging asphalt binder using asphalt bond strength (ABS) test that can measure a bonding force of asphalt binder and aggregate surface using Pneumatic Adhesion Tensile Testing Instrument (PATTI) used previously in the paint industry as a testing method specified in AASHTO TP-91.

Currently, in Korea, the frequent damage of aged concrete pavements causes route blockages due to maintenance and repair works. Ultra-rapid cement has been used as a measure to solve the economic losses which result from traffic delays, accidents, and civil complaints due to blocked routes. However, now, it couldn’t be used except for urgent constructions because the price is expensive and its onsite application is complicated, hence, fast hardening admixtures are being used in ordinary cement to solve the problem with ultra-rapid cement. In this research, it is intended to develop a material which enables early opening of the road being constructed and cured within 24 hours of closure, to secure durability characteristics of early strength concrete by incorporating admixtures (silica fume, latex, polymer powder), and to find optimal mixing ratio and select the optimal variable for each material.

It is a well known that concrete is strong for compression and weak for tension. For reinforcing the weakness and improving the performance about concrete, various methods are used. Fiber reinforced concrete that is one of them has been investigated in this study. The function of fiber in concrete is to improve the stress strain relation and toughness, crack control. It’s applied from normal strength concrete to ultra-high performance concrete. But it is essential to disperse fiber uniformly and to prevent aggregation of fiber in concrete, in order that fiber reinforced concrete show the sufficient performance. The various properties of fiber affect the essential properties, for instance, length and diameter of fiber, source, etc. So, this study evaluated the ultra-high performance concrete with mixed in composite fiber.

In the present study, FE analysis was performed for characterising structural strength of a seat frame w.r.t. varying sectional shapes as well as different materials of the seat back frame based on the FMVSS 207 regulation in order to obtain the design outline of a lightweight seat frane structure. Four types of materials, i.e., SAPH440, Al7021, Al6082 and carbon/epoxy composites were applied to the seat back frame type beams and their bending behaviours were compared by three point bending FE analysis. Consequently, the lightweight structure of seat back frame with the equivalent strength characteristics of conventional frame was suggested.

본 연구는 해상에서의 안전사고의 경감과 국민의 생명을 보호하기 위한 목적으로 자체 연구를 수행하여 FRP의 수리공법인 Butt Joint, Lap Joint, V-Scarf Joint(12t, 16t, 20t), X-Scarf Joint(12t 16t, 20t)의 인장강도와 굽힘강도를 통해 이음방식에 따른 구조강도 특성을 실험하였다. 이음 방법에 따른 인장강도와 굽힘강도의 시험편을 종합 분석한 결과, 인장강도의 강도와 굽힘강도의 그래프 패턴은 비슷한 양상으로 증가와 감소를 하였으며, 인장강도와 굽힘강도 모두 X-Scarf-Butt Joint-V-Scarf-Lap Joint 순으로 강도가 우수하였다. 인장강도는 강도특성이 가장 우수한 X-Scarf라 하더라도 Basic Material의 57% 수준의 강도를 나타내었고 굽힘강도는 X-Scarf가 Basic Material의 77% 수준의 강도를 나타내었다. 종합적으로 Over-Lay 구분을 포함하여 X-Scarf 12t 이음이 인장강도, 굽힘강도 특성이 우수하였으며 Lap Joint가 가장 좋지 않았다. Scarf 이음시 Taper 길이에 따른 강도의 차이는 V-Scarf 이음은 Taper의 길이가 가장 큰 20t가 인장강도, 굽힘강도 특성이 우수한 반면 X-Scarf 이음은 Taper의 길이가 가장 짧은 12t가 인장강도, 굽힘강도 특성이 우수하여 상반되는 결과를 나타내었다. 선박에는 많은 Stress가 작용하여 시험편만을 가지고 실험한 본 연구와 직접적인 비교는 힘들지만, 재료의 가장 기본 특성을 인장강도와 굽힘강도 시험을 통해 확인할 수 있다. FRP 국부적인 수리 방법인 Butt Joint, Lap Joint, V-Scarf, X-Scarf 4가지의 이음방법에 따른 시험값과 모재 대비 감소되는 비율을 제시하였고 추가적으로 V-Scarf와 X-Scarf의 Taper 길이별 특성을 12t, 16t, 20t로 구분한 결과값을 제시함으로써 수리 현장에서의 위치별 특성에 맞는 수리 방법의 응용이 가능하도록 하였다.

The repair of manhole raise has been caused much construction times and disruption of traffic flow, serious environmental pollution from crushed construction wastes, and budget waste due to the repeated repair construction works. In order to overcome such problems, we have developed the new manhole repairing composite structures by using a glass fiber-reinforced polymer (GFRP) pipe, which can raise manhole to the regular height of the overlayed road pavement with rapid construction and minimum traffic jams. This environmental-friendly technology is method completed by the methyl methacrylate monomer (MMA) double wide flanged GFRP pipe composite structures in order to raise manhole to the regular height. In this paper, two kinds of the compressive strength tests of MMA mortar composites were conducted and evaluated by a general compressive strength test, and compressive strength test after freezing-thawing resistance test. It was found that this MMA mortar composites will be used for the application of the double wide flanged GFRP pipe composite structures.

Acoustic target strength (TS) measurement and theoretical acoustic scattering models were applied to estimate the TS for assessing the fish biomass. TS measurement was made of ex situ sailfin sandfish Arctoscopus japonicus at 70 and 120 kHz, and then compared to backscatter model prediction. The live sandfish was tethered in seawater using monofilament lines. Measurements were made versus incidence angle, −50° to 50° relative to dorsal aspect directions. Distorted wave Born approximation (DWBA) model was used to calculated TS pattern. The TS values of sandfish (body length: 16.2 cm) at 70 and 120 kHz were ‒66.94 dB and ‒64.45 dB, respectively, and were about 20 dB lower than TS of other fishes in Korea waters. These TS levels were distributed within the range of the theoretical TS. Ex situ measurement and theoretical TS may be applied to improve acoustical detection and biomass estimation of the sandfish, and is necessary to measure with various lengths.

Morphological properties of dark banded rockfish (Sebastes inermis) were analysed to investigate its acoustic scattering characteristics. Total of 18 live samples was prepared for X-ray photos and collected morphological coordinates of their body and swim bladder shapes. Kirchhoff-ray mode model was used to calculate acoustic scattering pattern for broad-band frequency range. Inclination of swim bladder ranged from 17 to 30 and the averaged value was about 25.2° (S.D.(standard deviation)=3.15). There were no any tendency of increase or decrease in volume and area ratio of swim bladder to fish body and ranged from 2.2 % to 4.43 % and 14.85 % to 21.31 %, respectively. The averaged value of volume and area ratio was 3.13 % (S.D.=0.52) and 17.6 % (S.D.=1.5). b20 values were –69.01 for 38 kHz, –69.83 for 70 kHz, –70.17 for 120 kHz and -70.93 for 200 kHz, recpectively. Broadband acoustic patterns of dark banded rockfish for 20 ~ 200 kHz were similar among samples and they reflected size and morphological properties of fish species.