In this study, the design of fuel tank for SUVs (sports utility vehicles) was addressed through structural FE-simulation. For safety evaluation, we performed a shape analysis of fuel tank, discovered improvement measures for weak areas, and reflected them in the fuel tank design. Additionally, a strength analysis was conducted and the analysis results were reflected in the design. As a result of analysis through various design changes, it was possible to propose an appropriate fuel tank shape. Additionally, the effect of changes in the shape of the reinforcement and mounting bracket on the stiffness and strength of the fuel tank bracket was investigated.

In this study, the design of parking brake mounting bracket for SUVs (sports utility vehicles) was handled through structural analysis. For safety evaluation, we conducted a shape analysis of parking brake mounting bracket, discovered improvement measures for weak areas, and reflected them in the design. In addition, a strength analysis was performed and the analysis results were reflected in the design. As a result of analysis through various design changes, it was possible to suggest an appropriate parking brake mounting bracket shape. In addition, the effect of changes in the shape of the reinforcement and mounting bracket on the stiffness and strength of the parking brake mounting bracket was investigated.

In this study, the design of fuel tanks for SUVs (sports utility vehicles) was dealt with through structural analysis. Fuel tank analysis was performed to evaluate safety, and improvement plans for weak areas were found and reflected in the design. In addition, strength analysis and pressure analysis were performed in parallel to solve the problem of oil leakage around the lower part of the fuel tank and the rear mounting that occurred during the endurance test, and the analysis results were reflected in the design. As a result of analysis through various design changes, it was possible to present an appropriate reinforcement flange shape. In addition, when the thickness of the fuel tank was changed from 1.0mm to 0.8mm, the stiffness of the fuel tank decreased by approximately 30%, and reinforcement was required.

Purpose: This study aimed to construct and test a hypothetical model to explain predictive factors affecting nursing students' satisfaction and self-confidence in simulation-based education based on the National League for Nursing Jeffries Simulation Theory. Methods: A cross-sectional study was conducted on 305 fourth-year nursing students with experience in simulation-based education enrolled at universities in Gangwon-do, Gyeongsangbuk-do, and Gyeonggi-do. Data were analyzed using SPSS 25.0 and AMOS 25.0. Results: The hypothetical model showed good fit with the empirical data: χ2/df 2.17, RMSEA=.01, RMR=.01, GFI=.95, AGFI=.91, NFI=.94, TLI=.95, CFI=.97, and PNFI=.68. Simulation design characteristics, teaching efficiency, and flow were found to affect satisfaction and self-confidence directly. A bootstrap test indicated that teaching efficiency and flow mediated the relationship between simulation design characteristics and satisfaction and self-confidence. Conclusion: Simulation educators should apply best practice that enhance teaching efficiency and flow through well-organized simulation designs, nursing students can attain satisfaction and self-confidence through simulation-based education.

As modern industries are highly being developed, it is required that mechanical parts have to be manufactured with a high precision. In order to have precise parts, error-free designs have to be done before manufacturing with accuracy. For this intention being fulfilled, a mechanical analysis is essential for design proof. Nowadays, FEM simulation is a popular tool for verifying a machine design. In this paper, an impeller, being utilized in a compressor or an oil mixer as an actuator, is studied for an evaluation. The purpose of this study is to present a safety of an impeller for a proof of its mechanical stability. A static analysis for stress, strain, and deformation within a regular usage is examined. This simulation test shows 357.26×106 Pa for maximum equivalent stress and 0.207mm for total deformation. A fatigue test is carried to provide durability and its result shows that minimum safety factor is 3.2889, which guarantees that it runs without a fatigue failure in 106 cycles. The natural frequencies for the impeller is ranged from 228.09Hz to 1,253.6Hz for the 1st to the 6th mode. Total deformations at these natural frequencies are shown from 6.84mm to 12.631mm. Furthermore, Campbell diagram reveals that a critical speed is not found throughout regular rotational speeds. From the test results for the analysis, this paper concludes that the suggested impeller is proved for its mechanical safety and good to utilize at industries.

This paper is concerned to develop a fluid pressure system for the control of artificial bladder urine discharge. The primary goal is to force the fluid into the space between the inner wall and the outer wall by using a pump in the artificial bladder having a double structure of inner and outer walls and to form the urine discharge pressure by the contraction of the bladder inner wall due to the movement of the fluid. The ANSYS_CFD analysis is used to confirm the delivery of fluid pressure in the artificial bladder model, and the ANSYS_FSI analysis is used to identify the deformation and internal pressure of the artificial bladder through the delivery of fluid pressure, and to identify the discharge of urine. As the design parameters of the modeling of the artificial bladder and the fluid flow field, the capacity of the flow field, and the pump pressure input value were selected.

Mechanical components are to be produced with accurate dimensions in order to function properly in assemblies of a machine. Once designs of mechanical components are created, designers examine the designs by adopting many known experimental methods. A primary test method includes stress and strain evaluation of structural parts. In addition, fatigue test and vibration analysis are an important test method for mechanical components. Real experiments at a laboratory are established when products are manufactured. Since design changes should be done before producing the designs in factories, rapid modifications for new designs are required in production industries. FEM simulation is a proper choice for a design evaluation with speed at a detail stage in design process. This research focuses modeling and mechanical simulation of a mechanical component in order to ensure structural safety. In this paper, a universal joint, being used in driving axels of vehicles, is studied as a target component. A design model is created and tested in some ways by using commercial software of FEM. The designed component is being twisted to transmit heavy power and thus, torsional stress should be under strengths of the component’s material. The next is fatigue analysis to convince fatigue cycles to be within the endurance limit of the material. Another test is a vibration analysis for rotational components. This research draws final conclusions from these test analyses and recommends whether the designed model is under safety condition in terms of mechanical structure.

Modern manufacturing industries is to produce both precise and robust mechanical parts without failure while they are in service. In order to prevent a part failure for its lifetime, a mechanical design for a part should be examined on a basis of mechanical simulation. A nozzle plate, being a key part in steam engines, changes flow directions of steam in a turbine used in power plant. This paper is to the design and test for part safety and durability. Currently, nozzle plates are fabricated by welding nozzles to their plates. Welding causes some defects on the used materials while they are being manufactured. Another major defect is un-even pitches between welded nozzles. Welding causes phase changes because of high melting temperature of metal. This leads to decay on the welding spots, which weakens their structural strength and then, may lead to early damages on mechanical structures. This research proposes assembly-typed nozzle plate without welding. From the beginning, nozzle and plate are designed for insertion-typed assembly. Nozzle head and foot are designed in accordance with the grooves on outer ring and inner ring of a plate to make mating surfaces. Then the nozzle plate should be proved for structural and fatigue safety before they are put in manufacturing. This research adopts commercial softwares for modeling and mechanical simulation. The test result shows that the design with smaller mating area and deeper insertion produces higher safety in terms of structure and durability. From the conclusion, this paper proposes the assembly-typed nozzle plate to replace the welding typed.

Structural dynamic system involves random variables conditions such as material property, geometric parameters and applied loads. This uncertainties result from the structural parameter are carefully considered the dynamic structural response in displacement, stress, and natural frequencies. The random vibrational system must be designed to withstand a certain amount of the fluctuation with respect to the uncertainties. Harmonic response of a spring-mass system is mathematically modelled with the probabilistic finite element method using the Monte Carlo simulation. The aim of this paper is to find the optimal lowest frequency for the spring-mass system with random input variables and response parameters to the displacements. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical optimal design evaluation method is proposed for the design of the harmonic system. The numerical results are obtained where the next highest frequency of the system and displacements treated as constraints.

Structural system involves random conditions such as material property, geometric parameters and applied loads. This is caused by either measurement inaccuracy or system complexity and must be designed to withstand the uncertainties, Random structures may be modelled by using the finite element method using Monte Carlo simulation. It can be applied easily to any structural system with random parameters. The aim of this paper is to find the shape optimal design for the cantilever beam with random input variables to the height and response parameters to the displacement and stresses. The probabilistic design is carried out using ANSYS probabilistic design module in a commercial application software and then the optimal design is sequentially solved. An efficient and practical shape optimal design evaluation method is proposed for the design of the cantilever beam shape. The numerical results are obtained where total volume of the beam, stresses and displacements in the beam treated as constraints