PURPOSES : The increasing heat wave warnings during the summer season in Korea have significant impacts on daily life and industry as a whole, especially in urban areas (such as areas with asphalt and sidewalk pavements). Heat waves directly affect urban heat island and heat dome phenomena. Various urban temperature reduction measures are being discussed to reduce urban heat islands and heat dome phenomena and to improve citizen safety against summer heat waves; suggestions include thermal packaging, rooftop greening, and expansion of vegetation areas. There is a lack of analysis on the methodology for increasing the road spraying effect during summer heat waves (e.g., there is no systematic engineering study on the effect from reducing the temperature of the road spraying during a heat wave in the city) and on the types of road pavements in the city. In addition, as the asphalt pavements of roadways and block pavements installed in sidewalks account for a considerable portion of all pavements, this study provides a more systematic and scientific approach and procedures for reducing temperatures through road spraying in the city by tracking the effects of heat waves. METHODS : In this preliminary experiment, four types of road pavement materials were selected as test specimens: asphalt test specimens (AP- 300 mm × 300 mm × 50 mm), concrete test specimens (CP-300 mm × 300 mm × 50 mm), impermeable blocks (IB-200 mm × 200 mm × 60 mm), and self-permeable blocks (PB-200 mm × 200 mm × 60 mm). As a test method to evaluate the size and duration of each spray effect package type, the surface temperature of each specimen was measured using thermal imaging cameras every 20 min after spraying at the maximum temperature point of each specimen, and the average surface temperature was analyzed based on the collected temperature data. In addition, to conduct a quantitative analysis of the effect of reducing the surface temperature of road pavements by road spraying in summer, field tests were conducted on asphalt roads and watertight blocks for sidewalks. RESULTS : As a result of the comparative analysis of the spray effect under a 36 ℃ air temperature based on a heat wave warning, the surface temperatures were, from high to low, the asphalt (68.8 ℃), concrete (59.1 ℃), impermeable block (57.3 ℃), and permeable block (58.7 ℃). The asphalt pavement had the greatest effect on the heat island and heat dome phenomena. From measuring the temperature reduction effect and sustainability of each type of road pavement, the surface temperature reduction effects were ranked in the following order: water-permeable block (Δ18.0 ℃), asphalt test piece (Δ17.5 ℃), concrete test piece (Δ12.2 ℃), and water-permeable block (over 240 min). In the report pitching block, the average road surface temperature reduction between the pore recovery and treatment was expected to continue to decrease by approximately -4.3 ℃ on the day of work and approximately -2.4 ℃ on the next day. The expected effect of the temperature reduction owing to simple spraying on the surface of the pore block was evaluated to be limited to the day. CONCLUSIONS : In the road spray effect analysis conducted on the common asphalt road, there was a slight difference in the initial temperature reduction size as the test specimen was measured, but the surface temperature difference between the non-spray section and spray section tended to be approximately Δ3°C after 140 minutes of spraying. Therefore, it was determined that the asphalt pavement temperature reduction plan through road spraying in urban areas in summer would be the most effective if it was repeated twice or more in an hour (between 13:00 and 14:00) on the day of the heat wave.

In this study, the researcher investigated the effects of water mist nozzle shape on water mist according nozzle shape angle(=30°, 45°, 60°, 75° and 90°). It was found that the water mist spray with nozzle When exit angle of water mist nozzle is =90° as result examining about spray special quality of water mist, velocity distribution was expose to maximum. And temperature distribution of target plate was looked tendency that range low. Water mist spray system that consider in this research is one of the most important utilities providing water mist in order to supply fire extinguishing.

This study examined the effects of lactic acid spray, hot water spray, or their combined treatment, as well as the effects of acidified sodium chlorite (ASC), for the decontamination of Escherichia coli on beef carcass surfaces using a commercial intervention system. With this system, the effects of 2 or 4% lactic acid (v/v), hot water (89±1oC), or their combined treatment, were examined in terms of reducing inoculated E. coli. ASC (266 ppm), which was adjusted to pH 2.5 using acetic acid or citric acid, was applied using a hand-held spray system. When the beef carcasses were treated with 2 or 4% lactic acid for 10.4 s, less than 1 log reductions of inoculated E. coli were observed. A hot water spray treatment for 9.8 s resulted in a 2.1 log reduction of inoculated E. coli. However, when the hot water was followed with either 2 or 4% lactic acid, no difference in E. coli reduction was found between the hot water alone or the combined treatment with lactic acid. When ASC was adjusted to pH 2.5 with acetic acid and citric acid, 3.8 and 4.1 log reductions of E. coli were observed, respectively. Overall, the lactic acid spray treatment was least effective, and the ASC treatment was most effective, for the E. coli decontamination of beef carcasses. Therefore, these data suggest that ASC would be a more effective intervention against E. coli than most of the methods currently being used. However, more research is required to evaluate the effects of ASC on other organisms, as well as to identify application methods that will not affect meat quality.

본 연구는 하향 분사식 미니스프링클러의 낙수방지를 위한 새로운 제안으로 패킹부를 구성하여 패킹과 패킹지지부, 패킹 연결지지체의 메카니즘 분석과 구조 해석을 통하여 패킹부 소재 선정의 타당성을 확인하여 하향 분사식 미니스프링클러의 낙수방지 메카니즘을 개발하고, 제품을 제작하여 살수특성 실험을 수행한 결과는 다음과 같다. 낙수방지를 위하여 삽입되는 패킹부의 재료는 구조해석결과, 압력변화에 대응할 수 있는 재질로서 패킹재는 천연고무(ASTM; NR), 패킹지지체는 폴리프로필렌(PP)이 적합함을 확인하였다. 성능시험 결과, 미니스프링클러의 접속관에 용수를 공급할 때와 중단되는 과정의 대기압과 평형상태에서 선정된 패킹 및 패킹지지체는 압력제어 기능을 정확히 수행하여 낙수가 거의 발생하지 않고, 압력변화에도 민감하게 대응함을 확인하였다. 작용압력별 살수특성 성능을 분석한 결과, 유효살수반경, 유효살수면적, 평균살수심, 최대살수심, 유효최대살수심은 작용압력이 증가함에 따라 모두 증가하는 것으로 나타났다. 살수높이별 살수특성 성능을 분석한 결과, 유효살수반경과 유효살수면적은 살수 높이가 0.2m일 때 가장 낮은 값을, 0.3m일 때 가장 높은 값을 보였고, 그 이상 살수 높이가 높아지면 반대로 감소하였으며, 평균살수심은 살수높이가 높아질수록 감소하였다. 제안된 하향 분사식 미니스프링클러는 패킹부의 영향으로 압력이 증가함에 따라 살수성능이 유연성 있게 변화하여 급격한 변화를 나타내지 않았고, 용수압력이 감소될 때에는 작용압력이 1.1kgf/cm2이상의 범위에서만 살수되었으며, 그 이하에서는 제안된 패킹부에 의해 하향 분사식 미니스프링클러 본체로 공급되는 용수가 차단되어, 대기압과 평형상태에 있는 물의 자중과 중력작용에 의한 자유낙하를 방지함으로서 물방울의 형성 및 낙수 발생의 예방을 확인하였다.

An experimental study of the fire protection performance of water mist spray subjected to thermal radiation was presented. Downward-directed water mist sprays to interact with an under. gasoline pool fire were experimentally investigated in underground environment. The mass mean diameters of water mist droplet were measured by PMAS under various flow conditions. The developed water mist spray nozzle was satisfied to the criteria of NFPA 750. The mechanism of the fire extinguishment by water mist spray was concluded to be cooling of the fire surface which lead to suppressed of' file1 evaporation. It was proved that the water mist spray system under. lower pressures could be applied to underground fire protection system.

To slove the problems by the scum, which causes operational and water quality problems in water treatment plants, several researches were conducted based on the site investigations on twelve large water treatment plants, biological and chemical analysis of scum, analyzing raw water quality data. Two types of scum, which are from scum and floe scum, can be classified based on the analysis and site investigations. The major parameter generating floe scum was indicated as fine bubbles dissolved in the water. The fine bubbles dissolved in the water can be generated by over-saturated air in the water, adding aluminum surface as the coagulant, conducting the break point pre-chlorination and so on. The water spray method, which is one of the physical treatment methods for removing scum, was selected for conducting experiments on the removal efficiency in the flocculation basin of the real water treatment plant. The water spray method was successfully applied for removing scum with the advantages of using spiral nozzles in case of using the raw water rather than the cleaned water.

산업화, 도시화로 인해 수자원의 오염이 악화 되면서 기존에 염소를 이용한 정수처리 방법으로는 깨끗한 물을 공급하는데 어려운 실정이다. 이에 오존을 이용한 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 기존의 방수⋅방식 공법으로 사용되는 에폭시계 방수⋅방식제 및 스테인리스는 오존의 강력한 산화력으로 인해 열화되어 박리 등 문제 발생하였으며, 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 이에 따라 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 에 따른 내오존성 평가를 실시하였으며, 실제 하수처리장 환경에서의 전기화학적 안정성능 평가를 실시하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타났으며, 하수처리장 환경에서의 전기화학적 안정성능 평가 결과 용사금속 Ti가 403.83k∙ Ω∙cm2의 가장 높은 분극저항을 나타남으로써 높은 수준의 내구성을 확보하는 것을 확인할 수 있었다.

기존의 정수처리 방법으로는 제거되지 않는 물질이 발생함에 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 오존을 이용한 고도정수처리 시설의 내부 방수·방식재는 오존의 산화력에 의해 열화되며 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속용사 공법을 이용하여 수처 리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 및 피막의 표면처리 방법에 따른 내오존성 평가를 실시하였으며, 오존처리 후의 부착강도를 평가하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타 났으며 표면처리 방법으로는 테프론계 봉공처리제를 사용하여 마감하는 것이 내오존성 및 부착성능 확보에 가장 적합한 방법이라 판단된다.

Recently, Advanced water treatment facilities with Ozone are being introduced domestically. However, waterproofing/corrosion prevention construction method of concrete structure for existing advanced water treatment makes waterproofing/corrosion prevention materials and concrete deteriorated because of strong oxidation of ozone. Therefore, in this study, It was evaluated in Permeability Evaluation of metal spraying coating.

Recently, Advanced water treatment facilities with Ozone are being introduced domestically. However, waterproofing/corrosion prevention construction method of concrete structure for existing advanced water treatment makes waterproofing/corrosion prevention materials and concrete deteriorated because of strong oxidation of ozone. Therefore, in this study, It was evaluated in ozone resistance and bond strength of metal spraying coating.

A New spary chrysanthemum (Dendranthema grandiflorum) cultivar ‘ater Fog’was bred by open pollination of ‘ngaesoguk’ Its characteristics were investigated three times from 2004 to 2006 under forcing culture in spring and retarding culture in autumn. The natural flowering time of ‘ater Fog’was 24 October, but year-round production was possible by shading and lighting. It had flower diameter of 2.3 cm, 46.5 petals and 34.4 flowers per stem in autumn. The petal was narrow(0.4cm) and the color of petal was white with presence of green at flower center. Days to flower from short-day start for ‘ater Fog’ was about 48 in spring. ‘ater Fog’showed the vase life of 22.6 days in autumn. This cultivar was registered for a commercialization in 2007. ‘ater Fog’would be cultured under greenhouse and rain shelter condition in Korea.