Root-knot nematode (RKN), Meloidogyne incognita, inflicts significant greenhouse crop damage, causing over 40% economic losses. While chemical agents effectively control RKN, they leave harmful residue in soil and crops. To address this issue, we investigated soil-derived entomopathogenic fungi (EPF) in this study. We assessed the nematicidal impact of ten EPF species through in vivo and in vitro tests. Beauveria bassiana JEF-503 exhibited nematicidal effectiveness exceeding 65% in both experimental settings. In a semi-field test using greenhouse pots, we experimented with the application of B. bassiana JEF-503 suspension during tomato growth, which is an uncommon practice in comparison to chemical treatments due to residue concerns. B. bassiana JEF-503 was applied during transplantation, and the same application was repeated four weeks later. JEF-503 One-time and abamectin treatments were used as control groups. The JEF-503 two-time application notably reduced root damage compared to single JEF-503 or abamectin treatment. In conclusion, JEF-503 offers a promising, residue-free, and environmentally friendly alternative to chemical agents for RKN management.

리튬 덴드라이트의 효과적인 억제를 위해 유/무기 복합체를 리튬메탈 전극의 보호층으로 사용하였다. 유기물로는 PVDF-HFP가 사용되었으며 무기물로는 TiO2가 사용되었다. 유기물로 사용된 PVDF-HFP는 높은 유연성을 가지는 고분자로서 무기물의 matrix 역할을 하며, 무기물로 사용된 TiO2 나노입자는 보호막의 기계적 강도와 이온전도성을 향상시켜주는 역할을 하였다. 합성된 보호막은 SEM, AFM, XRD를 통하여 PVDF-HFP matrix에 TiO2가 잘 분산되어 있는 형태인 것을 확인할 수 있 었다. 또한 전기화학적 분석 결과, 향상된 기계적 물성과 이온전도성으로 인해 polymer-inorganic composite은 비교 샘플(untreated 와 PVDF-HFP 보호층) 대비 100번째 사이클까지 80%의 높은 쿨롱 효율 및 20 mV 미만의 낮은 과전압을 나타내었다.

Pine tree, a dominant species in the flora of Korea is the most beloved tree in Korea. However, recent outbreak of pine wilt disease caused by the pine wood nematode (PWN) Bursaphelenchus xylophilus threatens the vegetation of Pinus species seriously. Furthermore, Pinus densiflora and P. thunbergii, the predominant species in Korea forest are highly susceptible to PWN. Therefore, there has been an urgent demand for the development of a new nematocidal compounds to control PWN, which spurred the national research for the development of new compounds. To find novel sources for nematocidal agents, we used various plant resources for the development. In addition to the foreign plant extracts themselves, we also used the extracts of endophytes composed of over 300 endophytic fungi and 1,000 endophytic bacteria from plants which was reported to contain nematocidal activity. Several extracts of endophytes and plant extracts contained strong nematocidal activity, and the resources are analyzed to identify the active nematocidal compounds. These integrated approach of finding effective nematocidal compounds from plants could be a novel way to elucidate the sources for brand-new nematocidal agents.

A membrane module including grid was designed and introduced to MBR (membrane bio-reactor) for the purpose of better control of membrane fouling. It could be anticipated that the grid enhances the shear force of fluid-air mixture into the membrane surface by even-distributing the fluid-air to the membrane module. As MLSS concentration, packing density which is expressed in the ratio of the housing and the cross-sectional area of membrane fibers (Am/At) and air-flow rate were changed, membrane foulings were checked by monitoring fouling resistances. The total fouling resistance (Rc+Rf) without grid installation (i.e., control) was 2.13×1012 m-1 , whereas it was reduced to 1.69×1012 m-1 after the grid was installed. Regardless of the grid installation, the Rc+Rf increased as the packing density increased from 0.09 to 0.28, however, the increment of resistance for the grid installation was less than that of the control. Increase in the air flow rate did not always guarantee the reduction of fouling resistance, indicating that the higher air flow rate can partially de-flocculate the activated sludge flocs, which led to severer membrane fouling. Consequently, installation of grids inside the housing have brought a beneficial effect on membrane fouling and optimum air flow rate is important to keep the membrane lowering fouling.

MBR공정에서 물리적 세정방법인 공기폭기(Aeration)는 장기간 막성능을 유지시키기 위한 주요 핵심 방법으로, 기존의 연구들은 산기관의 성능을 극대화시켜 공기세정을 최적화시키려 하였다. 분리막의 효율적인 슬러지 탈리를 위해 폭기위 치⋅시간⋅균일 배출성 및 데드존(Dead Zone) 감소 등에 대한 다양한 연구들이 진행되어 왔으나, 이를 통한 더 이상의 성능향상은 기대하기 어려운 상황이다. 본 연구에서는 기존의 분리막 모듈을 개량하여 공기폭기의 효과를 극대화 하는 연구를 진행하였다. 선행연구로 진행된 Lab-scale실험을 기반으로, Pilot-scale 장치를 세팅하여 장기평가 및 분석 등을 진행하였다. 동일 site에서 개량모듈한 것과 그렇지 아니한 것에 대하여 비교분석하였다.

고농도의 MBR처리공정에서 물리적 세정방법인 공기폭기(Aeration)는 장기간 막성능을 유지시키는기 위한 주요 방법으로, 기존의 연구들은 산기관의 성능을 극대화시켜 공기세정을 최적화시키는 연구를 주로 하였다. 효율적인 슬러지 탈리를 위해 폭기위치⋅시간⋅균일 배출성 및 데드존(Dead Zone) 감소 등 다양한 연구들이 진행되어 왔으며, 이를 통한 더 이상의 성능향상은 기대하기 어려운 상황이다. 산기관 최적화 이외에 막성능을 장기간 유지하기 위해서는 막모듈 전체에 공기에 의한 슬러지 탈리가 일어나야 하며, 이는 모듈의 구조적인 문제를 개선함으로써 해결책을 찾을 수 있다. 본 연구에서는 기존의 분리막 모듈과 구조가 변경된 모듈의 오염(fouling)에 따른 분리막 성능을 비교하고자 한다.

A multi-input single-output (MISO) semi-active control systems were studied by many researchers. For more improved vibration control performance, a structure requires more than one control device. In this paper, multi-input multi-output (MIMO) semi-active fuzzy controller has been proposed for vibration control of seismically excited small-scale buildings. The MIMO fuzzy controller was optimized by multi-objective genetic algorithm. For numerical simulation, five-story example building structure is used and two MR dampers are employed. For comparison purpose, a clipped-optimal control strategy based on acceleration feedback is employed for controlling MR dampers to reduce structural responses due to seismic loads. Numerical simulation results show that the MIMO fuzzy control algorithm can provide superior control performance to the clipped-optimal control algorithm.

본 논문에서는 스마트폰에서 체감을 유발할 수 있는 조작 방법을 체계화하고자 한다. 먼저, 기존의 체감형 조작에 대한 연구를 살펴보고 가정용 콘솔 기기 및 휴대용 콘솔기기에서 체감을 유발하는 방식을 정리한다. 이를 기반으로 스마트폰에서 체감 유발 방식을 체계화하고자 한다. 본 논문의 연구 결과는 스마트폰 환경에서 체감형 게임을 제작하는데 필요한 디자인 가이드라인을 제공함으로써 체계적인 체감형 게임 개발에 유용하게 사용될 것으로 예상된다.

Benzylideneacetone (BZA) is a compound derived from culture broth of an entomopathogenic bacterium, Xenorhabdus nematophila (Xn). Its immunosuppressive activity is caused by its inhibitory activity against eicosanoid biosynthesis. This BZA is being developed as an additive to enhancc control efficacy of other commercial microbial insecticides. This study was focused on the enhancement of the immunosuppressive activity of BZA by generating its chemical derivatives toward decrease of its hydrophobicity. Two hydroxylated BZA and one sugar-conjugated BZA were chemically synthesized. All derivatives had the inhibitory activities of BZA against phospholipase A<SUB>2</SUB> (PLA<SUB>2</SUB>) and phenoloxidase (PO) of the diamondback moth, Plutella xylostella, but BZA was the most potent. Mixtures of any BZA derivative with Bacillus thuringiensis (Bt) significantly increased pathogenicity of Bt. BZA also inhibited colony growth of four plant pathogenic fungi. However, BZA derivatives (especially the sugar-conjugated BZA) lost the antifungal activity. These results indicated that BZA and its derivatives inhibited catalytic activities of two immune-associated enzymes (PLA2 and PO) of P. xylostella and enhanced Bt pathogenicity. We suggest its use to control plant pathogenic fungi.

Bacillus thuringiensis (Bt) is effective to control the diamondback moth, Plutella xylostella. However, its relative slow and unstable control efficacy limits its wide use by farmers. To facilitate pathogenic rate of Bt, a bacterial mixture technique has been developed in this study. Two entomopathogenic bacteria, Xenorhabdus nematophila (Xn) and Photorhabdus temperata temperata (Ptt), possess high immunosuppressive activity against several lepidopteran insects. The mixture treatments using Bt + Xn or Bt + Ptt significantly enhanced Bt pathogenicity in median lethal concentration and time. Though live Xn and Ptt bacterial cells gave significant effect on the pathogenicity, their 48 h culture broth after removing the bacterialcells still possessed the synergistic effect on the Bt pathogenicity. The larvae fed with the bacterial culture broth suffered significant immunosuppression in response bacterial to infection

The most effective methods against pine wilt disease (Bursaphelenchus xylophilus, PWD), black pine bast scale (Matsucoccus thunbergianae), pine needle gall midge (Thecodiplosis japonensis) is the trunk injection of insecticides. The period of trunk injection that was considered with ecology and physiology of pests such as pine wilt disease, black pine bast scale and pine needle gall midge, was applied from Dec. to next Feb. and June, Dec. respectively. And there are differences in quantities of being injected chemicals to pine trees by the period of trunk injection. Thus, we investigated to prevent the effect of insecticides, to estimate the effect under the trunk injection of insecticides for pine trees against pests by the injecting period and time, boring site, opening and shutting of injection site. On Pinuns thunbergii, it was examined to figure out the effect of insecticides by the injecting period, twice a month on a sunny day around 10 AM from January to September. Injecting of insecticides was tested at a dose of 5ml per cm dbh of a pine tree after boring with hand drill at 50 cm high from the ground. As a result, abmectin 1.8% EC and phospamidon 50% SL were injected over 90% of mortalities from the end of January to the middle of March but as time goes by, injecting insecticides tended to decrease. To compare the volume of injecting insecticides in a day, between 10 AM and 2 PM on February 23rd, abamectin 1.8% EC was injected at a dose of 5ml per pine trees with micro pipette after boring with a drill machine at 50 cm high from the ground. As a result, injecting insecticide of a pine which was injected around 10 AM was completely injected and about 90% of the insecticide was injected in case of a pine that was injected around 2 PM. Trunk injection of insecticides was examined to figure out differences of the volume of injected insecticides before and after rain. There was no difference not only the rainfall but also the bored direction.

The objective of this study was to evaluate the effective inoculation position of Neoseiulus californicus for control of Tetranychus urticae on apple branch. This study was conducted under green house conditions. N. californicus was inoculated at different position (Top, Middle and Bottom) of apple branch with a 20:1 ratio (T. urticae:N. californicus). Overall, N. californicus significantly reduced T. urticae numbers in the treatment branches than in the control branch. At 10th day, the T. urticae population was most significantly reduced in the treatment ‘Top’ in which N. californicus were inoculated on the leaf positioned in the top of a branch than in other treatments. At 20th day, most of T. urticae were exterminated in all treatment branches. The daily movement of N. californicus and T. urticae,and their coexistence on apple branch was monitored. Adult N. californicus disappeared from the branch as soon as T. urticae were exterminated in the treatment branches. The result indicates that N. californicus disperse downwards more than upwards in the tree, and the most effective inoculation position for N. californicus for control of T. urticae is the leaves positioned in the top of a branch.

It is an important and urgent issue to improve process capability in quality control. Process capability refers to the uniformity of the process. The variability in the process is a measure of the uniformity of output. A simple, quantitative way to express process capability, the degree of variability from target in specification is defined by process capability index(PCI). Almost process capability indices are defined under normal distribution. However, these indices can not be applied to the process of non-normal distribution including reliability. We investigate current research on the process of non-normal distribution, and advanced method and technology for developing more reliable and efficient PCI. Finally we suggest the perspective for future study.