Honeybee winter failure and mortality are a big issue in korea, especially from 2021 to 2023. Traditionally, honeybee winter failure has been estimated as Approximately 10-20%. However, for last 2 years, we had more than 35% of winter failure which impacted not only beekeeping sectors but also agriculture and the whole society as well. Primary factor was ascribed as honeybee mite resistance development to conventional acaricudes. Coinhabitance of tropilaelaps mite in honeybee complicated the mite problem. Further threat of vespa hornets especially in fall season would exerbate the wintering condition. More important is that the more frequent abnormal weather condition in fall and winter season could affected the winter bee production and maintenance of honeybee overwintering physiology. On these situation, we also observed some diseases were associated to the death of bees.

Honeybee winter failure and mortality are a big issue in korea, especially from 2021 to 2023. Traditionally, honeybee winter failure has been estimated as Approximately 10-20%. However, for last 2 years, we had more than 35% of winter failure which impacted not only beekeeping sectors but also agriculture and the whole society as well. Primary factor was ascribed as honeybee mite resistance development to conventional acaricudes. Coinhabitance of tropilaelaps mite in honeybee complicated the mite problem. Further threat of vespa hornets especially in fall season would exerbate the wintering condition. More important is that the more frequent abnormal weather condition in fall and winter season could affected the winter bee production and maintenance of honeybee overwintering physiology. On these situation, we also observed some diseases were associated to the death of bees.

This study aims to present a method to evaluate the relative risk of failure due to liquefaction of domestic small to medium-sized earthfill dams with a height of less than 15 m, which has little information on geotechnical properties. Based on the results of previous researches, a series of methods and procedures for estimating the probability of dam failure due to liquefaction, which calculates the probability of liquefaction occurrence of the dam body, the amount of settlement at the dam crest according to the estimation of the residual strength of the dam after liquefaction, the overtopping depth determined from the amount of settlement at the dam crest, and the probability of failure of the dam due to overtopping was explicitly presented. To this end, representative properties essential for estimating the probability of failure due to the liquefaction of small to medium-sized earthfill dams were presented. Since it is almost impossible to directly determine these representative properties for each of the target dams because it is almost impossible to obtain geotechnical property information, they were estimated and determined from the results of field and laboratory tests conducted on existing small to medium-sized earthfill dams in previous researches. The method and procedure presented in this study were applied to 12 earthfill dams on a trial basis, and the liquefaction failure probability was calculated. The analysis of the calculation results confirmed that the representative properties were reasonable and that the overall evaluation procedure and method were effective.

후쿠시마 원전사고 발생으로 다수기의 지진안전성에 관한 연구의 필요성이 부각되었다. 한 부지에 건설된 원자력발전소의 경우 유 사한 지진응답을 보이기 때문에 적게나마 원자력발전소 SSCs간의 지진손상에 대하여 상관성이 존재하므로 합리적 지진안전성 평가 를 위하여 지진손상 상관성을 고려하여야 한다. 본 연구에서는 쌍둥이 호기의 필수전원상실사건에 대하여 확률론적 지진안전성 평가 를 수행하였다. 적절한 지진손상 상관계수를 도출하기 위하여 확률론적 지진응답해석을 수행하여 적용하였다. External Event Mensuration System 프로그램을 활용하여 다수기의 필수전원상실사건의 고장수목을 구성하여 지진취약도 및 지진리스크를 분석하 였다. 또한 SSCs간의 지진손상 상관성을 완전독립 및 완전종속으로 고려하여 비교 분석을 수행하였다.

The seismic safety of nuclear power plants has always been emphasized by the effects of accidents. In general, the seismic safety evaluation of nuclear power plants carries out a seismic probabilistic safety assessment. The current probabilistic safety assessment assumes that damage to the structure, system, and components (SSCs) occurs independently to each other or perfect dependently to each other. In case of earthquake events, the failure event occurs with the correlation due to the correlation between the seismic response of the SSCs and the seismic performance of the SSCs. In this study, the EEMS (External Event Mensuration System) code is developed which can perform the seismic probabilistic safety assessment considering correlation. The developed code is verified by comparing with the multiplier n, which is for calculating the joint probability of failure, which is proposed by Mankamo. It is analyzed the changes in seismic fragility curves and seismic risks with correlation. As a result, it was confirmed that the seismic fragility curves and seismic risk change according to the failure correlation coefficient. This means that it is important to select an appropriate failure correlation coefficient in order to perform a seismic probabilistic safety assessment. And also, it was confirmed that carrying out the seismic probabilistic safety assessment in consideration of the seismic correlation provides more realistic results, rather than providing conservative or non-conservative results comparing with that damage to the SSCs occurs independently.

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

The likelihood of failure by the corrosion of high temperature H2S/H2, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and H2S concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of H2S.

The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels

Failure risk investigation of any structure in a seismic zone can be done by the seismic probabilistic risk assessment (SPRA), which became a very attractive area of research in terms of safety measurement. This paper introduces such kind of concept to identify which magnitude in a specific seismic zone will contribute more vulnerable failure point in a structure. Here, for implement this idea a case study on a concrete gravity dam has been carried out. In order to make a correlation between the magnitude and failure risk contribution based on different damage stage, a combination of seismic hazard analysis and the probability of structural collapse is adopted. Therefore, the deaggregation of the mean annual frequency of failure risk by magnitude is used in this study to quantify four different limit stages of failure identification criteria. Consequently, from analyzing the result, in case of concrete gravity dam, this deaggregation approach shows the tensile crack in the base looks more vulnerable damage stage for the specific seismic zone.

본 연구에서는 하천제방의 침식, 침투영향을 고려한 위험도 및 통합위험도를 산정하였다. 이를 위해 추계학적 강우변동 생성기법을 이용하여 생성된 태풍기와 장마기별 유량 및 수위수문곡선을 활용하여 하천제방에 대한 침식, 침투 그리고 통합 위험도를 산정하였다. 침식에 대한 하천제방의 위험도는 허용 소류력을 이용하여 평가하였고 침투류 해석은 각 제방별로 대표 제방단면을 선정 후 SEEP/W 모형을 통해 해석을 실시하였으며 한계동수경사법을 이용한 MFOSM 분석을

수공구조물의 위험도에 관한 불확실성을 검토하기 위하여 본 연구에서는 빈도해석을 통하여 추정되는 설계홍수량의 분산량을 고려한 불확실성 해석을 실시하였다. Gumbel 분포형을 기본 분포형으로 가정하였으며, 모멘트법, 최우도법, 확률가중모멘트법을 이용하여 각 매개변수 추정방법별로 추정된 설계홍수량에 대한 이론적인 분산량을 산정하였다. 이론적으로 유도한 분산량의 특성을 규명하기 위하며 다양한 표본크기와 설계연한, 비초과확률 및 변동계수조건에 대하여 Monte