본 연구에서는 사용자로부터 입력받은 이미지를 분석하여 그에 맞는 음악을 생성, 재생하는 방법을 고안 하였다. 단순히 이미지를 청각화 하는 기술적인 의미 뿐 아니라 사용자의 이미지에 담긴 정서와 의도 또한 담아내는 것을 목표로 하였다. 사용자는 본 연구에서 제안된 어플리케이션에 원하는 물체를 그린다. 인공지능을 통해 이미지가 어떤 물체인지 판별 후, 그 물체와 이어질 수 있는 감정을 대응해 해당 멜로디의 감정과 분위기를 맞출 수 있도록 하였다. 정서에 알맞는 음정(key)를 설정한 뒤, 사용자가 이미지를 그릴 때 입력한 획순을 분석해 이를 기준으로 음계를 추출하여 선율을 생성하였다. 향후 이미지의 청각적 표현을 구현하는 것뿐만 아니라 그림에 대한 예술적인 이해와 의미 있는 음악을 만들어내기 위한 화성법 등의 작곡이론을 연구하여 이미지에 담긴 예술성과 의도를 음악에 담아낼 수 있는 한 가지 방향을 제시할 것이다. 또한 그림을 인식하고 판별하기 위한 인공지능 기술과 그림 분석, 음악 생성 등의 예술 분야를 결합해 공학과 예술의 융합이라는 방향으로서 의미 있는 시도가 될 것이다.

The Ground Penetrating Radar(GPR) is a typical non-destructive test equipment which is widely used in seeking a cavity or underground facility. Test results are generally expressed 2D monochrome or color images, distribution of the parabolic waveforms are used to determine the existence of cavity and facility. (Fig. 1) But, an analysis method of image may cause errors depending on the knowledge and experience of analyst. In this study, we analyzed the coefficient of correlation between A-Scan data of GPR to judge the existence of cavity located under the pavement layer. The correlation analysis was performed based on the assumption that the relationship of correlation between a number of A-Scan data passing through a non-cavity section is larger than a small number of A-Scan data passing through a cavity section, and relationship of correlation was visualized using Surfer Program. (Fig. 2) In addition, apart from the correlation analysis, we compared the Power spectrum of the A-scan data for the cavity section and non-cavity section. In other words, assuming that the size of the energy changes depending on the existence of the cavity, PSD (Power Spectrum Density) is obtained for all the B-Scan data, and the tendency of the energy size is confirmed using the 3D wireframe map of the Surfer program. (Fig. 3) As a result, the correlation coefficient shows a small tendency in the cavity section and the PSD shows a large tendency, which is intuitively recognized that the energy attenuation in the cavity section is smaller than other material. But, there are some ambiguous sections to judge the tendency clearly, this is estimated to be noise on the underground facility and it is necessary to take measure of mitigating this.

This study is a duralumin and applying heat to the STS-wide measurement range is used, the surface temperature by using the temperature of studying the non-destructive testing of a new paradigm to estimate the position and size of a structure defect purpose. STS and duralumin which has a structure defect is applied a heat by a heater. Its difference of STS and duralumin surface temperature is measured using IR thermography. The estimated result of the STS and duralumin experiment and that of theoretical analysis of PDE are compared and analyzed to diagnose the STS and duralumin defect. Moreover, this study can save time and money and improve accuracy contrast to the existing ultrasonic NDE experiment. In addition, the new paradigm of NDT/NDE by reverse-engineering is going to be valid if the data of thermal analysis and temperature distribution from the specifications of many materials is accumulated and verified. In this study, the average surface temperature of the STS in the same heating condition was 4.53 ° K higher than that of duralumin and both of the surface temperature showed an inflection point in the defect 2.5mm.The maximum surface temperature difference was formed on the 2.5mm, and the study proves its reliability because the average surface temperature of the STS and duralumin was 0.74°K, 0.45°K higher than the theoretical surface temperature.

PURPOSES : In this study, an image analysis method is used to evaluate the pore structure characteristics and permeability of hybrid concrete. METHODS: The binder weight of hybrid concrete is set to 400 kg/m3, 370kg/m3, and 350 kg/m3, and for each value of binder weight, the pore structure and permeability of concrete mixture is evaluated. The permeability of hybrid concrete is evaluated using a rapid chloride penetration test(RCPT). RESULTS : The concrete pore structure characteristics of hybrid concrete reveals that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. The permeability of the hybrid concrete for all values was measured to be below 1000 C, which indicates a "Very Low" level of permeability relative to the evaluation standard of KS F 2711. Additionally, as the binder weight is decreased, there is a significant increase in the permeability of chloride ions. CONCLUSIONS : In this study, the pore structure characteristics of hybrid concrete at different binder weights shows that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. Consequently, chloride ion penetration resistance of the hybrid concrete is diminished. As a result, it is expected that this will reduce the concrete’s durability.

목 적 : 기존 Single RF source에서는 환자의 해부학적 차이에 따른 영상신호의 불균형으로 인해 dielectric shading artifact가 발생하여 최근 이를 개선하고자 dual RF source를 사용하고 있다. 본 논문은 dual RF source 사용 시 필요한 B1 calibration scan의 호흡방법 변화에 따라 영상에 어떤 영향을 미치는지 알아보고자 한다. 대상 및 방법 : 복부질환이 없는 건강한 지원자 14명을 대상으로 검사장비는 Archieva 3.0T TX(philips medical system, Netherlands)를 사용하였고, 신호수집 코일은 32channel sense cardiac coil을 사용하였다. 검사방법은 호흡을 실제 검사와 동일한 expiration, 변형한 방법인 free breathing과 inspiration하는 방법으로 B1 calibraion scan을 각각 실시하여 호흡방법의 변화에 따라 B1 calibration scan 후 3D dual echo, e-THRIVE sequence/Axial 영상을 획득하였다. 평가방법은 정량적 방법으로 liver를 9개 구역으로 나누어 SNR과 CNR을 비교 측정하였고, 정성적 평가방법은 방사선사 3명이 영상의 homogeneity와 background noise 발생 정도를 3점 척도로 상대평가 하였다. 평가된 값은 Wilcoxon signed rank test(SPSS 18.0K for windows)로 통계처리 하였다. 결 과 : 정량적 평가는 expiration, Free breathing, inspiration 일 때 3D dual echo의 SNR은 251.05/167.07/183.53, e-THRIVE 161.08/117.22/128.38로 나타났고, CNR은 3D dual echo에서 73.68/56.4/55.69, e-THRIVE 62.61/40.34/35로 나타났다. 정성적 평가는 3D dual echo 2.30/1.76/1.94, e-THRIVE 2.56/1.46/1.98로 나타났다. 통계적 분석은 expiration 일 때 통계적으로 유의하였으나(p<0.05), free breathing과 inspiration 사이에서는 통계적으로 유의하지 않았다(p>0.05). 결 론 : 실제 검사와 동일한 호흡방법인 expiration으로 B1 calibration scan을 하였을 때 3D dual echo와 e-THRIVE에서 영상이 제일 우수한 것으로 나타났다. 다른 호흡방법으로 실시한 경우에는 SNR과 CNR이 저하되고 심할 경우 dielectric shading artifact가 발생하여 영상의 질을 감소시킴을 알 수 있었다. 따라서 복부 MRI 검사 시실제 검사방법과 동일한 호흡방법으로 얻은 B1 calibration scan이 보다 진단학적 가치가 높은 영상을 구현함을 확인 할 수 있었다.

IR camera has been used widely for the temperature measurement and fault detection of the moving bodies and rotating bodies. The high-speed performance of the IR camera and a reliable thermal analysis method are required for the condition monitoring of the railway vehicle running at high speed. The effective fault detection method using a thermal image analysis could make a real time monitoring of the high speed train possible. Therefore the investigation of the performance of the thermal image analysis method was performed to find the effective thermal image data analysis method. The results suggested that the comparison of the characteristics of the temperatures obtained at different conditions and a continuous temperature subtraction method could be used as a useful analysis method for detecting abnormal temperature condition and histogram equalization could also help to enhance the fault detectability by increasing the contrast of the thermal image

이 연구에서는 디지털 이미지 분석법을 활용하여 북동태평양 ODP Leg 204 시추 코아 시료에서 산출된 부유성 유공충 Neogloboquadrina pachyderma 권각의 감긴 방향을 컴퓨터 프로그래밍으로 결정하였다. 이것은 유공충 군집 이미지에서 N. pachyderma 개체를 자동 인식하게 한 것이며, N. pachyderma 권각 방향을 컴퓨터 프로그래밍으로 결정할 수 있도록 고안한 것이다. 이 알고리즘을 이용한 새로운 판독 방법을 사용한 결과 유공충 시료에 대한 정량 분석이 빠르게 수행될 수 있게 되었으며, 실제현미경을 통한 관찰 결과와 비교하였을 때 약 90% 만큼 높게 일치하였다. 이 수치는 컴퓨터를 이용한 디지털 이미지 분석이 미고생물학 분야에 성공적으로 적용될 수 있다는 점을 시사하고 있다.

As an efficient method to detect blending of general gravitational microlensing events, it is proposed to measure the shift of source star image centroid caused by microlensing. The conventional method to detect blending by this method is measuring the difference between the positions of the source star image point spread function measured on the images taken before and during the event (the PSF centroid shift, δθc,PSF). In this paper, we investigate the difference between the centroid positions measured on the reference and the subtracted images obtained by using the difference image analysis method (DIA centroid shift, δθc.DIA), and evaluate its relative usefulness in detecting blending over the conventional method based on δθc,PSF measurements. From this investigation, we find that the DIA centroid shift of an event is always larger than the PSF centroid shift. We also find that while δθc,PSF becomes smaller as the event amplification decreases, δθc.DIA remains constant regardless of the amplification. In addition, while δθc,DIA linearly increases with the increasing value of the blended light fraction, δθc,PSF peaks at a certain value of the blended light fraction and then eventually decreases as the fraction further increases. Therefore, measurements of δθc,DIA instead of δθc,PSF will be an even more efficient method to detect the blending effect of especially of highly blended events, for which the uncertainties in the determined time scales are high, as well as of low amplification events, for which the current method is highly inefficient.

In this study, digital image processing was used to estimate the tensile forces of the remote hanger cable using image-based back analysis method. A portable digital camcorder was used as a vision-based system considering convenient and economical aspects for use. The ambient vibration test was performed on a suspension bridge to verify the validity of the image-back analysis method of measuring the hanger cable tensile force.

본 연구에서는 난류 흐름 중에서 모래의 침강속도를 PTV를 이용하여 측정하였다. PTV는 영상해석기법을 이용하여 입자를 추적하는 방법으로 흐름 중의 침강속도를 측정할 수 있는 유일한 방법이라 판단된다. 실험은 흐름이 없는 경우와 흐름이 있는 경우로 나누어 실시하였다. 흐름이 없는 경우에 PTV로 측정한 침강속도를 기존문헌과 비교한 결과 잘 일치하여 기법의 타당성을 입증하였다. 흐름이 있는 경우에는 유속이 증가함에 따라 침강속도가 감소하는 것으로 밝혀졌다