Bisphenol-A, also known as BPA, is commonly used as a building block for epoxy and polycarbonate plastics. However, it has been recently identified as a major source of water pollution due to its release into the water from plastic products. BPA-based resins can also contaminate the water with high concentrations of BPA, which can enter the water bodies through production units and wastewater discharge. Photocatalysis, particularly the photo-Fenton process, is an effective method for wastewater treatment and degrading pollutants. Titanium dioxide (TiO2) is usually chosen based on its high photocatalytic properties and high performance. However, its wide band gap energy is a major issue for the photocatalytic process. This means that the catalyst can only exhibit high photocatalytic performance under UV-light irradiation and usually requires an acidic pH, which limits its use. In order to address the aforementioned issues, a visible-light photoactive photo-Fenton reaction has been successfully developed to degrade bisphenol A at natural pH using H2O2. The process was highly efficient, achieving complete degradation of phenol in just three hours of visible light irradiation with Cu-MOF. This environmentally friendly Fenton process has the advantage of occurring at natural pH levels with the presence of H2O2, providing a new perspective for efficient degradation. The photocatalyst was characterized using single X-ray diffraction (SC-XRD), powder X-ray diffraction (PXRD), Fourier Transform Infrared Spectroscopy (FTIR), and UV–vis diffuse reflectance spectroscopy (DRS).

This work describes Ni–Ce–Cu metallic–organic framework (MOF) for the detection of non-essential amino acid l-cysteine. The tri-metallic Ni–Ce–Cu MOF was synthesized via a solvothermal method. The cyclic voltammetry and the differential pulse voltammetry techniques were used to examine the electrochemical detection of l-cysteine. The Ni–Ce–Cu MOF shows an oxidation peak in PB solution at pH 3.0 between the potential range of 0.0 and 0.7 V and strong electro-catalytic activity toward the oxidation of l-cysteine across a wide linear range of 0.1 to 250 nM and low detection limit (LOD) was calculated of 1.56 nM. The analysis of l-cysteine in milk and egg yolk samples showed with recovery range of 96.75–103.5% and 97.78–99.43% with RSD% of 2.3–3.2% and 2.7–7.2%, respectively. These results show the Ni–Ce–Cu MOF has high selectivity for l-cysteine detection in milk and egg samples.

Ammonia is considered a promising hydrogen carrier due to its high hydrogen density and liquefaction temperature. Considering that the energy efficiency generally decreases as chemical conversion is repeated, it is more efficient to directly use ammonia as a fuel for fuel cells. However, catalysts in direct ammonia fuel cells have the critical issues of sluggish ammonia oxidation reaction (AOR) rate and poisoning of reaction intermediates. In particular, the use of precious metal as cathodic catalysts has been limited due to ammonia crossover and poisoning. In this study, we introduce Fe-based single-atom catalysts with selective activity for the oxygen reduction reaction (ORR) even in the presence of ammonia. As the Fe content increased, the single-atom structure of the catalysts changed into Fe nanoparticles or carbides. Among our Fe–N–C catalysts, FeNC-50 with a Fe loading amount of 0.34 wt% showed the highest ORR performance regardless of the ammonia concentration. In particular, the difference in activity between the catalysts increased as the concentration increased. The FeNC-50 catalyst showed remarkable stability after 1000 cycles. Therefore, we believe that single-atom dispersion is an important factor in the development of stable non-precious catalysts with high activity and inactivity for the ORR and AOR, respectively.

In this work, a nanocomposite containing gold (Au) nanofibers decorated iron-metal–organic framework (Fe-MOF) was successfully synthesized for electrochemical detection of acetaminophen (AAP). The as-synthesized Au@Fe-MOF nanocomposite was confirmed by various characterization techniques. Morphological analysis showed that the Au nanofibers with an average size of less than 10 nm were dispersed on the Fe-MOF. Cyclic voltammetric analysis showed that the Au@Fe-MOF nanocomposite showed well-defined redox peaks with higher current than that of GCE and Fe-MOF. The Au@Fe-MOF/ GCE exhibited a linear range, sensitivity, and detection limit of 0.5–18 μM, 4.95 μM/μA/cm2, and 0.12 μM, respectively. The Au@Fe-MOF/GCE showed a very low response for the interference materials. The real sample analysis revealed that the Au@Fe-MOF/GCE showed good recovery towards the AAP in urine and paracetamol. Therefore, the developed sensor can be used for quality control of AAP.

Metal-organic frameworks (MOFs) are widely used in various fields because they make it easy to control porous structures according to combinations of metal ions and organic linkers. In addition, ZIF (zeolitic imidazolate framework), a type of MOF, is made up of transition metal ions such as Co2+ or Zn2+ and linkers such as imidazole or imidazole derivatives. ZIF- 67, composed of Co2+ and 2-methyl imidazole, exhibits both chemical stability and catalytic activity. Recently, due to increasing need for energy technology and carbon-neutral policies, catalysis applications have attracted tremendous research attention. Moreover, demand is increasing for material development in the electrocatalytic water splitting and metal-air battery fields; there is also a need for bifunctional catalysts capable of both oxidation/reduction reactions. This review summarizes recent progress of bifunctional catalysts for electrocatalytic water splitting and metal-air batteries using ZIF-67. In particular, the field is classified into areas of thermal decomposition, introduction of heterogeneous elements, and complex formation with carbonbased materials or polyacrylonitrile. This review also focuses on synthetic methods and performance evaluation.

Abstract In this study, we investigated that the activated carbon (AC)-based supercapacitor and introduced SIFSIX-3-Ni as a porous conducting additive to increase its electrochemical performances of AC/SIFSIX-3-Ni composite-based supercapacitor. The AC/SIFSIX-3-Ni composites are coated onto the aluminum substrate using the doctor blade method and conducted an ion-gel electrolyte to produce a symmetrical supercapacitor. The electrochemical properties of the AC/SIFSIX-3-Ni composite-based supercapacitor are evaluated through cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge tests (GCD). The AC/SIFSIX-3-Ni composite-based supercapacitor showed reasonable capacitive behavior in various electrochemical measurements, including CV, EIS, and GCD. The highest specific capacitance of the AC/SIFSIX-3-Ni composite-based supercapacitor was 129 F g−1 at 20 mV s−1.

나노여과를위한 박막 나노복합체(TFN) 멤브레인 기술의 발전은 천연 자원에서 오염 물질을 제거하는 데 중요하 다. 최근에는 기존의 박막 복합체(TFC) 및 나노복합체 멤브레인에서 불가피한 단점을 극복하기 위해 다양한 금속유기구조체 (MOF) 수정이 테스트되었다. 일반적으로 MIL-101(Cr), UiO-66, ZIF-8 및 HKUST-1 [Cu3(BCT2)]은 용매 투과성 및 용질 제 거 측면에서 막 성능을 현저하게 향상시키는 것으로 입증되었다. 이 리뷰에서는 이러한 MOF가 나노 여과에 미치는 영향에 대 한 최근 연구가 논의될 것이다. 서로 다른 금속유기구조체의 동시 사용 및 고유한 금속유기구조체 레이어링 기술(예: 딥 코팅, 스프레이 사전 배치, Langmuir-Schaefer 필름 등)과 같은 다른 새로운 기능도 멤브레인 성능을 향상시켰다. 이러한 MOF 변 형 TFN 멤브레인은 각각의 TFC 및 TFN 멤브레인에서 분리 성능을 향상시키는 것으로 자주 나타났을 뿐만 아니라 많은 보 고서에서 비용 효율적이고 환경 친화적인 공정에 대한 잠재력을 설명한다.

본 연구에서는 다공성 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료와 “이온젤” 이라고 불리는 고분자 고체 전해질을 이용하여 슈퍼커패시터를 제작 하였으며, 금속유기골격체의 함량에 따른 전기화학적 거동을 관찰하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)으로 분석하였으며, 그 결과로, 다공성 활성탄소 대비 금속유기골격체를 0.5 wt% 첨가 하였을 때 가장 높은 전기용량값을 확인 할 수 있었으며, 0.5 wt% 이상의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며, 이러한 결과를 바탕으로 제조된 다공성 활성탄소/금속유기골격체 복합재료 기반의 슈퍼커패시터는 다양한 분야에 활용이 가능 할 것으로 판단된다.

본 연구에서는 “이온젤” 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전 해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전 고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작 하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특 성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었 다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료 되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다

Current petrochemical product mainly comes from light olefin, such as ethylene and propylene. these olefins can be obtained as mixture form of olefin/paraffin, which is co-product of naphtha cracking process. However, the mixture of light olefin and paraffin is considerably difficult to separate because they have similar physicochemical properties such as density, boiling point, and molecular weight. Cryogenic distillation is currently utilized, but still suffered from high operating cost. Membrane separation with polyimide-based material is a promising alternative due to its lower energy cost and modular operation. Here, we synthesized composite membrane with metal-organic framework (MOF) based on polyimide exhibiting high permeability and selectivity in propylene/propane separation, as well as simple preparation and high stability.