Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

The chemical composition of 86 species of native plants in Korea, including plants to be afforestation, was analyzed. The chemical composition of the species analyzed was different. The species with the highest extractable content was Viburnum dilatatum (3.91%), and the species with the lowest extractable content was Ligustrum lucidum (0.11%). The lignin content ranged from 12 to 39%, with an average of 25%. The species with the highest lignin content was Chaenomeles lagenaria (39.37%). Hemicellulose content ranged from 18 to 52%, with the highest species being Thuja occidentalis (51.22%) and Eucommia ulmoides (48.84%). Cellulose content ranged from 25 to 58%, and the species with the highest content were Prunus serrulata (57.67%), Diospyros kaki (57.14%), Aesculus turbinata (53.29%), Albizia julibrissin (53.02%), and Zelkova serrata (52.29%). The chemical composition was different for each use taxon of 86 plant species. The lignin content was the highest in the fruit group and the lowest in the group other than recommended species for afforestation. Cellulose content was highest in non-reforestation-recommended tree species and lowest in fruit trees. In classification according to tree height, lignin content was higher in shrubs than in tall trees, and cellulose content was highest in tall trees. Between deciduous and evergreen trees, the lignin content was high in deciduous trees (26.46%), and the cellulose content was also high in deciduous trees (44.01%). As a result of analyzing the correlation between each compound, there was a difference. There tended to be a positive correlation between extractives and lignin content. There was a negative correlation between extractives and holocellulose content, hemicellulose and cellulose. The higher extract content affected the cellulose content much more than hemicellulose. Also, the higher the lignin content, the lower the cellulose content. The species with low lignin content and high cellulose content were Diospyros kaki and Prunus serrulata var. spontanea. This result is expected to be primary data for bioenergy, pulp industry and bioindustry.

경상남도농업기술원 화훼연구소에서 2021년 화색이 연황 색이며 화심이 녹색인 미니 절화용 거베라 품종 ‘크림쿠키’ (Cream Cookie)를 육성하였다. ‘크림쿠키’ 품종은 2014년 황색 미니 ‘Sun City’를 모본으로, 백색 미니 ‘Blandy’를 부 본으로 인공교배를 실시하여 육성된 품종이다. 2021년까지 생육 및 개화 특성검정과 기호도 조사를 실시하였으며 ‘크림 쿠키’의 생육 및 개화특성을 대조품종인 ‘Sun City’와 비교하 였다. ‘크림쿠키’는 연황색(RHS 4C) 꽃잎과 녹색 화심을 가진 반겹꽃 거베라 품종이다. 화폭이 7.1cm인 작은 꽃이며, 화경 장은 58.9cm였다. 화경 직경은 상부 0.4cm, 하부 0.7cm 였 다. 외부설상화의 길이는 2.8cm이며 폭은 0.8cm였다. 개화 소요일수는 65.7일로 ‘Sun City’에 비하여 18.8일 빨랐으며, 첫 개화시 엽수는 22.4매였다. 연간 주당 절화수량은 102.3 본으로 ‘Sun City’의 82.0본에 비하여 20.3본이 많았다. 절 화수명은 17.8일로 ‘Sun City’보다 4.1일 더 길었다. ‘크림쿠 키’는 화폭이 7.1cm의 미니 품종으로 연간 주당 100본 이상 절화 생산이 가능하다. 또한 수확 후 꽃 캡 씌우기, 꽃목 보강 등 추가적인 작업을 생략할 수 있어 생산비 절감이 가능하므 로 농가보급 확대가 기대된다.

Nasopharyngeal stenosis is defined as a morphological transition of narrowing at the nasopharyngeal region. A 2-yearold, castrated male, Korean short hair cat was referred to the animal medical center, Gyeongsang National University. According to clinical signs, diagnostic imaging, and physical examination, nasopharyngeal stenosis was diagnosed. The staphylectomy was performed using a CO2 laser, and there were not any post-operative complications. The patient was discharged in two days. This report describes the case of nasopharyngeal stenosis in cat and represents that laser ablation could be a good option for surgical management of the nasopharyngeal region with a low complication rate.

Foot-and-mouth disease (FMD), which affects cloven-hoofed animals, is economically important because of its highly contagious nature. FMD virus (FMDV), the causative agent of FMD, involves seven serotypes (O, A, Asia1, C, and SAT 1-3). Serotype Asia1 is unique to the Asian territory and is subdivided into nine genetic groups (G-I-IX) based on nucleotide variations in the VP1 sequence. Asia1 Shamir, the most representative Asia1 vaccine, is not highly protective against the Asia1/MOG/05 (G-V) lineage found in North Korea in 2007. Therefore, we investigated whether a chimeric virus strain (Asia1/MOG/Shamir), in which the VP4, VP2, and VP3 sequences of Asia1/MOG/05 were combined with the VP1 sequence of Asia1 Shamir, can simultaneously protect against both viruses. We determined the optimal viral growth conditions for the commercial utilization of this chimeric virus strain. Of the three types of cell culture media, the Cellvento medium resulted in the highest amount of antigen in the samples. The chimeric strain was proliferated in a small bioreactor to produce a test vaccine, and its immunogenicity was evaluated in pigs. The virus neutralization (VN) titer against the Asia1 Shamir virus was > 1/100 after the second immunization with the chimeric vaccine in pigs. In addition, a single dose of the test vaccine resulted in a VN titer of > 1/100 against the Asia1/MOG/05 strain. Taken together, our chimeric vaccine strain provided sufficient protection against the Asia1/MOG/05 and Asia1 Shamir viruses, suggesting its potential as a novel vaccine for both these strains.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

The development of existing radioactive waste (RI waste) management technologies has been limited to processing techniques for volume reduction. However, this approach has limitations as it does not address issues that compromise the safety of RI waste management, such as the leakage of radioactive liquid, radiation exposure, fire hazards, and off-gas generation. RI waste comes in various forms of radioactive contamination levels, and the sources of waste generation are not fixed, making it challenging to apply conventional decommissioning and disposal techniques from nuclear power plants. This necessitates the development of new disposal facilities suitable for domestic use. Various methods have been considered for the solidification of RI waste, including cement solidification, paraffin solidification, and polymer solidification. Among these, the polymer solidification method is currently regarded as the most suitable material for RI waste immobilization, aiming to overcome the limitations of cement and paraffin solidification methods. Therefore, in this study, a conceptual design for a solidification system using polymer solidification was developed. Taking into account industrial applicability and process costs, a solidification system using epoxy resin was designed. The developed solidification system consists of a pre-treatment system (fine crush), solidification system, cladding system, and packing system. Each process is automated to enhance safety by minimizing user exposure to radioactive waste. The cladding system was designed to minimize defects in the solidified material. Based on the proposed conceptual design in this paper, we plan to proceed with the specific design phase and manufacture performance testing equipment based on the basic design.

The two-spotted spider mite, Tetranychus urticae Koch, is one of the most important agricultural pests. Therefore, we screened fifteen compounds from natural products for their spatial repellent and oviposition deterrent activities against T. urticae in the laboratory by using two-choice and no-choice tests. In the bridge two-choice test, nine compounds showed the spatial repellent effects on T. urticae at 20 mg dose, resulting in reduced numbers of eggs. Among the nine compounds, at 2 mg dose, two compounds were selected as having more spatial repellent activity than the others. The two compounds also showed spatial repellent and oviposition deterrent effects in the two-choice test from hosts. In the no-choice test from a host, the spatial repellent effects of the two compounds to T. urticae were significantly stronger than that of controls. These results suggest that the findings can be used as potential agents for the prevention and population control of T. urticae in the field.

The cotton aphid, Aphis gossypii glover (Hemiptera: Aphididae), is the world-wide agriculture pest and has the ability to become resistant to many pesticides. Hence, we conducted behavioral tests on apterous and alate aphids for series compounds from natural products by using a two-choice test, a no-choice test, a host choice test and electroantennography (EAG). As a result, we found 3 out of 30 compounds for apterous aphids and 2 out of 15 compounds for alate aphids, both of which showed powerful repellent effects on these aphids. In this study, we suggest that our findings could be useful and eco-friendly spatial repellents for controlling cotton aphid.

Background: The grading of Hanwoo (Korean native cattle) is based on four economic traits, and efforts have been continuously made to improve the genetic traits associated with these traits. There is a technology to predict the expected grade based on the 4 economic genetic SNP characteristics of Korean cattle calves using single nucleotide polymorphism (SNP) technology. Selection of highly proliferative, self-renewing, and differentiating satellite cells from cattle is a key technology in the cultured meat industry. Methods: We selected the Hanwoo with high and low-scored of genomic estimated breeding value (GEBV) by using the Hanwoo 50K SNP bead chip. We then isolated the bovine satellite cells from the chuck mass. We then conducted comparative analyses of cell proliferation, immunocytochemistry, qRT-PCR at short- and long-term culture. We also analyzed the differentiation capability at short term culture. Results: Our result showed that the proliferation was significantly high at High scored GEBV (Hs-GEBV) compared to Low scored GEBV (Ls-GEBV) at short- and long-term culture. The expression levels of Pax3 were significantly higher in Hs-GEBV bovine satellite cells at long-term culture. However, there were no significant differences in the expression levels of Pax7 between Hs- and Ls-GEBV bovine satellite cells at short- and long- term culture. The expression levels of MyoG and MyHC were significantly high at Ls-GEBV bovine satellite cells. Conclusions: Our results indicated that selection of bovine satellite cells by Hanwoo 50K SNP bead chip could be effective selection methods for massive producing of satellite cells.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

This research examines the impact of visualizing virtual luxury products in the metaverse on consumers' perceptions of luxury products in the real world. We explore the metaverse as a marketing platform and investigate the relationship between the quality of visualization of virtual luxury products and consumers’ evaluations of real luxury products. The study hypothesizes that poor visualization quality of virtual luxury products will decrease the evaluation of authentic luxury goods, and this effect will be mediated by decreased perceived authenticity. Additionally, we predict that the negative effect will be mitigated by high-quality visualization.

Blockchain is an immutable ledger that records transactions and tracks assets using a common communication protocol. It stores a copy of the blockchain and implements a consensus function to verify transactions. Blockchain is applied to industries beyond finance, such as retail, to maintain security and transparency. Consumers with knowledge of blockchain technology are likely to be affected when evaluating products with blockchain embedded, impacting their product evaluation. The study investigates the impact of blockchain technology on consumers' product evaluation and how knowledge of blockchain and product quality moderate its effects.

To improve the quality of jujube (Zizyphus jujuba Miller var. hoonensis), which is a fruit of health functional, the effect of polyphenol preparation treatment on the fruit characteristics of two cultivars (cv. Bokjo and cv. Sangwang) of jujube was investigated. There was no difference in the height and breast diameter of jujubes tested between the polyphenol treatments and non treatment. Jujube trees treated with polyphenol preparation produced significantly more fruit than untreated in both cultivars. In cvultivar of Bokjo, the polyphenol preparation treatment increased the fruit's fresh weight and dry weight more than two times, respectively, compared to the untreated treatment. Polyphenol preparation tr eatments also changed the leaf characteristics of jujube trees. In the polyphenol-treated trees, leaf thickness tended to be thickest at the top and thinnest at the bottom. Polyphenol preparation treated jujube trees showed no difference in chlorophyll content. Moisture content was slightly higher in the untreatment than in the treatments. Visually, the polyphenol preparation treatment had a dark green color. Jujubes treated with polyphenol preparations showed differences in polyphenol content in fruits. The polyphenol content in both peel and flesh of the treatments were much higher than that of the untreatment. Reducing sugar was contained more in the peel than in the flesh and was higher in the untreatment than in the polyphenol preparation treatments. Treatment with polyphenol preparation showed differences in fruit appearance. As described above, it was found that the treatment of polyphenol preparation changed the leaves, fruit shapes and components of jujube trees. In particular, jujubes treated with polyphenol preparations are expected to contribute significantly to eco-friendly and highly functional jujube cultivation, as they appear to produce many fruits and increase the content of polyphenols and sugars.

Porous carbons are considered promising for CO2 capture due to their high-pressure capture performance, high chemical/ thermal stability, and low humidity sensitivity. But, their low-pressure capture performance, selectivity toward CO2 over N2, and adsorption kinetics need further improvement for practical applications. Herein, we report a novel dual-templating strategy based on molten salts (LiBr/KBr) and hydrogen-bonded triazine molecules (melamine–cyanuric acid complex, MCA) to prepare high-performance porous carbon adsorbents for low-pressure CO2. The comprehensive investigations of pore structure, microstructure, and chemical structure, as well as their correlation with CO2 capture performance, reveal that the dual template plays the role of porogen for multi-hierarchical porous structure based on supermicro-/micro-/meso-/ macro-pores and reactant for high N/O insertion into the carbon framework. Furthermore, they exert a synergistic but independent effect on the carbonization procedure of glucose, avoiding the counter-balance between porous structure and hetero-atom insertion. This enables the preferred formation of pyrrolic N/carboxylic acid functional groups and supermicropores of ~ 0.8 nm, while retaining the micro-/meso-/macro-pores (> 1 nm) more than 60% of the total pore volume. As a result, the dual-templated porous carbon adsorbent (MG-Br-600) simultaneously achieves a high CO2 capture capacity of 3.95 mmol g− 1 at 850 Torr and 0 °C, a CO2/ N2 (15:85) selectivity factor of 31 at 0 °C, and a high intra-particle diffusivity of 0.23 mmol g− 1 min− 0.5 without performance degradation over repeated use. With the molecular scale structure tunability and the large-scale production capability, the dual-templating strategy will offer versatile tools for designing high-performance carbon-based adsorbents for CO2 capture.