EU taxonomy requires to solve problems for safe management of radioactive waste and disposal of spent fuel, which is a precondition for growing demand for nuclear power plant. Currently, Korea manages about 18,000 tons of high-level radioactive waste at temporary storage facilities in nuclear power plant sites, but such temporary storage facilities are expected to become saturated sequentially from 2031. Therefore, it is necessary to secure a permanent disposal facility to safely treat high-level radioactive waste. In accordance with the second basic plan for high-level radioactive waste management in 2021, it is necessary to establish requirements for regulatory compliance for the site selection and site acquisition, investigation and evaluation, and construction for the establishment of a deep geological disposal facility. In this study, we analyzed the regulatory policies and cases of leading foreign countries related to deep geological disposal facilities for high-level radioactive waste disposal waste such as IAEA, USA, Sweden, and Finland using data analysis methodology. To analyze a large amount of textbased document data, text mining is applied as a major technology and a verification standard that secures validity and safety based on the regulatory laws described so far is developed to establish a regulatory base suitable for domestic deep geological disposal status. Based on the collected data, preprocessing and analysis with Python were performed. Keywords and their frequency were extracted from the data through keyword analysis. Through the measured frequency values, the contents of the objects and elements to be regulated in the statutory items were grasped. And through the frequency values of words co-occurring among different sections through the analysis of related words, the association was obtained, and the overall interpretation of the data was performed. The results of analyzing regulations of major foreign countries using text mining are visualized in charts and graphs. Word cloud can intuitively grasp the contents by extracting the main keywords of the contents of the regulations. Through the network connection graph, the relationship between related words can be visually structured to interpret data and identify the causal relationship between words. Based on the result data, it is possible to compare and analyze the factors to be supplemented by analyzing domestic nuclear safety case and regulations.

This research examines the impact of visualizing virtual luxury products in the metaverse on consumers' perceptions of luxury products in the real world. We explore the metaverse as a marketing platform and investigate the relationship between the quality of visualization of virtual luxury products and consumers’ evaluations of real luxury products. The study hypothesizes that poor visualization quality of virtual luxury products will decrease the evaluation of authentic luxury goods, and this effect will be mediated by decreased perceived authenticity. Additionally, we predict that the negative effect will be mitigated by high-quality visualization.

Blockchain is an immutable ledger that records transactions and tracks assets using a common communication protocol. It stores a copy of the blockchain and implements a consensus function to verify transactions. Blockchain is applied to industries beyond finance, such as retail, to maintain security and transparency. Consumers with knowledge of blockchain technology are likely to be affected when evaluating products with blockchain embedded, impacting their product evaluation. The study investigates the impact of blockchain technology on consumers' product evaluation and how knowledge of blockchain and product quality moderate its effects.

Since high-level radioactive wastes contain long-lived nuclides and emit high energy, they should be disposed of permanently through a deep geological disposal system. In Korea, the first (2016.07) and the second (2021.12) basic plans for the management of high-level disposal systems were proposed to select sites for deep geological disposal facilities and to implement business strategies. Leading countries such as Finland, Sweden and France have developed and applied safety cases to verify the safety of deep geological disposal systems. By examining the regulatory status of foreign leading countries, we analyze the safety cases ranging from the site selection stage of the deep geological disposal system to the securing of the permanent disposal system to the investigation, analysis, evaluation, design, construction, operation, and closure. Based on this analysis, we will develop safety case elements for long-term safety of deep geological disposal systems suitable for domestic situation. To systemically analyze data based on safety cases, we have established a database of deep geological disposal system regulations in leading foreign countries. Artificial intelligence text mining and data visualization techniques are used to provide database in dashboard form rather than simple lists of data items, which is a limitation of existing methods. This allows regulatory developers to understand information more quickly and intuitively and provide a convenient interface so that anyone can easily access the analyzed data and create meaningful information. Furthermore, based on the accumulated bigdata, the artificial intelligence learns and analyzes the information in the database through deep learning, and aims to derive a more accurate safety case. Based on these technologies, this study analyzed the legal systems, regulatory standards, and cases of major international leading countries and international organizations such as the United States, Sweden, Finland, Canada, Switzerland, and the IAEA to establish a database management system. To establish a safety regulation base suitable for the domestic deep geological disposal environment, the database is provided as data to refer to and apply systematic information management on regulatory standards and regulatory cases of overseas leading countries, and it is expected that it will play a key role as a forum for understanding and discussing the level of safety of deep geological disposal system among stakeholders.

Kori-1, the nuclear power plants in South Korea, first started operation in April 1978 and was suspended permanently in 2017. The saturation rate time of spent nuclear fuel generated by major nuclear power plants operating in Korea are getting closer. If we fail to dispose spent nuclear fuel, which is equivalent to high-level radioactive waste, the nuclear power plants will have to be shutdown. High-level radioactive waste is permanently disposed through a deep geological disposal system because it contains long-term half-life nuclides and emits high energy. To select the deep geological disposal site and construct the disposal facilities, it is necessary to establish appropriate regulatory policies accordingly. The status of database construction in OECD-NEA, NRC, SITEX, and IAEA, which provides safety regulations for deep geological disposal system, stipulates each requirement for dismantling nuclear power plants. However, details such as specific figures are not specified, and guidelines for the disposal of high-level radioactive wastes are not clearly distinguished. In Korea, the CYPRUS program, an integrated database system, has been developed to support comprehensive performance evaluation for high-level waste disposal. However, due to several difficult situations, maintenance and upgrades have not been performed, so the research results exist only in the form of raw data and the new research results have not been reflected. Other than that, there is no preemptive basis for regulating the deep geological disposal system. With real-time database, we can develop a regulatory system for the domestic deep disposal system by systematically analyzing the regulatory condition and regulatory case data of international organizations and foreign leading countries. The database system processed and stored primary data collected from nuclear safety reports and other related data. In addition, we used relational database and designed table to maximize time and space efficiency. It is provided in the form of a web service so that multiple users can easily find the data they want at the same time. Based on these technologies, this study established a database system by analyzing the legal systems, regulatory standards, and cases of major foreign leading countries such as Sweden, Finland, the United States, and Japan. This database aims to organize data for each safety case component and further prepare a safety regulatory framework for each stage of development of disposal facilities suitable for the domestic environment.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.

The (Ga1-xZnx)(N1-xOx) solid solution is attracting extensive attention for photocatalytic water splitting and wastewater treatment owing to its narrow and controllable band gap. To optimize the photocatalytic performance of the solid solution, the key points are to decrease its band gap and recombination rate. In this study, (Ga1-xZnx)(N1-xOx) nanofibers with various Zn fractions are prepared by electrospinning followed by calcination and nitridation. The effect of the composition and crystallinity of electrospun oxide nanofibers on the morphology and optical properties of the obtained solid-solution nanofibers are systematically investigated. The results show that the final shape of the (Ga1-xZnx) (N1-xOx) material is greatly affected by the crystallinity of the oxide nanofibers before nitridation. The photocatalytic properties of (Ga1-xZnx)(N1-xOx) with different Ga:Zn atomic ratios are investigated by studying the degradation of rhodamine B under visible light irradiation.

In this study, (GaN)1-x(ZnO)x solid solution nanoparticles with a high zinc content are prepared by ultrasonic spray pyrolysis and subsequent nitridation. The structure and morphology of the samples are investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The characterization results show a phase transition from the Zn and Ga-based oxides (ZnO or ZnGa2O4) to a (GaN)1-x (ZnO)x solid solution under an NH3 atmosphere. The effect of the precursor solution concentration and nitridation temperature on the final products are systematically investigated to obtain (GaN)1-x(ZnO)x nanoparticles with a high Zn concentration. It is confirmed that the powder synthesized from the solution in which the ratio of Zn and Ga was set to 0.8:0.2, as the initial precursor composition was composed of about 0.8-mole fraction of Zn, similar to the initially set one, through nitriding treatment at 700oC. Besides, the synthesized nanoparticles exhibited the typical XRD pattern of (GaN)1-x(ZnO)x, and a strong absorption of visible light with a bandgap energy of approximately 2.78 eV, confirming their potential use as a hydrogen production photocatalyst.

Bismuth vanadate (BiVO4) is considered a potentially attractive candidate for the visible-light-driven photodegradation of organic pollutants. In an effort to enhance their photocatalytic activities, BiVO4 nanofibers with controlled microstructures, grain sizes, and crystallinities are successfully prepared by electrospinning followed by a precisely controlled heat treatment. The structural features, morphologies, and photo-absorption performances of the asprepared samples are systematically investigated and can be readily controlled by varying the calcination temperature. From the physicochemical analysis results of the synthesized nanofiber, it is found that the nanofiber calcines at a lower temperature, shows a smaller crystallite size, and lower crystallinity. The photocatalytic degradation of rhodamine-B (RhB) reveals that the photocatalytic activity of the BiVO4 nanofibers can be improved by a thermal treatment at a relatively low temperature because of the optimization of the conflicting characteristics, crystallinity, crystallite size, and microstructure. The photocatalytic activity of the nanofiber calcined at 350oC for the degradation of RhB under visible-light irradiation exhibits a greater photocatalytic activity than the nanofibers synthesized at 400oC and 450oC.

The kidney is a highly complex organ, and acute or chronic renal diseases can occur with various complications such as diabetes and hypertension. So far, no target specific treatment is available in acute or chronic renal failure, necessitating the development of alternative therapeutic strategy. Recent experimental findings suggest that the renal function and structure can be restored after being treated with various sources of stem/progenitor cells. In this review, we discuss up-to-date findings of the potential of renal progenitor/stem cells in alleviating renal injuries with a focus on preclinical studies. We also review cellular mechanisms underlying the therapeutic function of these cells.

Acute kidney injury (AKI) is a disorder that is manifested by a sudden decrease of renal function within several hours, and AKI remains a significant cause that can lead to increasing morbidity and mortality. Although AKI has been extensively studies in animal models, translating the results from animal studies into clinical use has not been successful due to various factors including basal etiology of kidney deficiency and comorbidities and the complexity of this pathology. As a golden parameter, measuring serum creatinine (SCr) and blood urea nitrogen (BUN) has been conventionally used for determining the renal function, however, these biomarkers has been regarded suboptimal to identify renal injuries in early stages. In this study, we attempted to screen other serum biomarkers in early AKI event using cynomolgus monkeys. Two male monkeys, aged 60 months, were subjected to ischemic injury by unilateral clamping of renal pedicles for forty five minutes and then subsequently reperfused; the unclamped kidney was regarded as non-injured controls. Compared with control kidneys, we have found that the concentration of several inflammatory proteins including MCP1, TGFα, GSTα, were higher in the renal vein of injured kidney compared with control side after 24 and 48 hours of AKI. However, changes of serum level of KIM-1, which is one of the most-widely studied marker in rodent studies, were not different after AKI. Our results provide an useful information while developing a novel marker in AKI.

Bi0.5Na0.5TiO3 (BNT) based ceramics are considered potential lead-free alternatives for Pb(Zr,Ti)O3(PZT) based ceramics in various applications such as sensors, actuators and transducers. However, BNT-based ceramics have lower electromechanical performance as compared with PZT based ceramics. Therefore, in this work, lead-free bulk 0.99[(Bi0.5Na0.5)0.935Ba0.065](1-x)LaxTiO3-0.01SrZO3 (BNBTLax-SZ, with x = 0, 0.01, 0.02) ceramics were synthesized by a conventional solid state reaction The crystal structure, dielectric response, degree of diffuseness and electric-field-induced strain properties were investigated as a function of different La concentrations. All samples were crystallized into a single phase perovskite structure. The temperature dependent dielectric response of La-modified BNBT-SZ ceramics showed lower dielectric response and improved field-induced strain response. The field induced strain increased from 0.17% for pure BNBT-SZ to 0.38 % for 1 mol.% La-modified BNBT-SZ ceramics at an applied electric field of 6 kV/mm. These results show that Lamodified BNBT-SZ ceramic system is expected to be a new candidate material for lead-free electronic devices.

We previously reported Pear Pest Forecasting Management System (PPFMS) for the Improvement of pass ratio of Korean exporting pears. It is consisted of regular field forecasting by pear farmers, meteorological data obtained by automatic weather station (AWS), an internet web page (http://pearpest.jnu.ac.kr/) as information collecting and providing ground, and information providing service. Currently, we are expanding this system to the area, Cheonan and Ansung, where pear orchards are organized into exportation-specific group. Further, the information obtained from field forecasting and AWS were up-loaded to under-constructing upgraded webpage (http://www.kpear.kr), with several pest/disease-related information. We hope this pest forecasting management system increases the pass ratio of Korean exporting pears throughout establishment of farmer-oriented forecasting, inspiring farmers’ effort for the prevention and forecasting of diseases and pests occurring at pear orchards.

Ameloblastomas are benign odontogenic tumor and the most common neoplasm in jaws and they have locally invasive property and high recurrence rate. Four typical subtypes ameloblastomas are plexiform, follicular, granular cell and acanthomatous type, but their developmental states during tumorigenesis are uncertain. And thus authors studied about developing states of four types of ameloblastomas by immunohistochemical staining for cytokeratin 8/18 which was an intermediate filament of epithelial cell origin and for vimentin which was an intermediate filament of mesenchymal cell origin, and then by comparative analyses of the results. Authors selected seven cases for every four types of ameloblastomas, and then performed immunohistochemcial staining for cytkeratin 8/18 and vimentin to all selected specimen by using monoclonal antibodies about cytoleratin 8/18 and vimentin, LSAB(Labelled StreptoAvidin Biotin) reactant and HRP(Horse Radish Peroxidase) system. Labelling indices of cytokeratin 8/18 of plexiform and follicular types of ameloblastomas were significantly high values in the group of ameloblast-like cells and labelling indices of cytokeratin 8/18 of all types of ameloblastoma were high values in the group of transformed cells, but their differences were not significant. Labelling index of vimentin of plexiform ameloblastoma was significantly high value in the group of ameloblast-like cells and others showed comparatively lower values. Labelling index of vimentin of granular cell type of ameloblastoma in the group of transformed cells was significantly high value and others showed comparatively lower values. Consequently the most primitive form of ameloblastoma was plexiform, and more differenciated form was follicular type and granular cell type and acanthomatous type were most differenciated form of ameloblastomas

In this study, the cytotoxicity of commonly used local anesthetics was evaluated on odontoblasts which are essential for pulpal homeostasis in vitro. Local anesthetics, such as articaine, bupivacaine, levobupivacaine, lidocaine, mepivacaine, prilocaine, and procaine, were tested on the odontoblast cell line, MDPC-23. The concentration-and time-dependent cytotoxic effects of local anesthetics on odontoblasts were measured by MTT assay. Among local anesthetics treated for 18 h, only bupivacaine significantly showed cell death in a concentration-(LC50=1.2mM) and time-dependent manner. To confirm cell death induced by bupivacaine, the observation of cell morphology and FACS using Annexin V and propidium iodide (PI) staining were performed. As a result of Annexin V and PI staining, as well as the morphological change, only bupivacaine induced apoptotic cell death on odontoblasts when compared with levobupivacaine and lidocaine. These results suggest that bupivacaine might affect normal pulpal integrity even after uneventful local anesthesia.

Al t hough substance P(SP) , a potent pro- inflammatory peptide, is involved in inflammation and immune responses‘ t he eff'ect of SP on t he expression of macrophage inflammatory protein 3a (MIP- 3α CCL20) in periodontal liga ment(PDL) cell s a re unknown, Equally as enigmatic is the link between SP, t he stress protein heme oxygenase- l(HO-l) ‘ and CCL20 procluction, We investigated whether SP induces the release of chemokine CCL20 from immortal ized PDL(IPDL) ceJJ s‘ and fur ther c l a꺼 SP mediated pathways, We also examined the relationship between HO-l a ncl CCL20 by t reating PDL cells with SP, Incubating IPDL cells with SP increased expression of CCL20 mRNA a nd CCL20 protein in a dose-time dependent manner Highly selective p38 and ERKl/2 inhibitors abrogated SP-induced expression of CCL20 in IPDL cell s, SP is a lso responsible for ini t iating phosphorylation of I/C B, degradation of Iκ B‘ ancl activat ion of NF'-/C B, SP induced expression of HO-l in both a concentration- and time-dependent man nel ‘ and CCL20 refl ected s imilar patterns, The inductive effects o[ SP on HO- l and CCL20 wer e enhanced by HO- j inducer hemin and the membrane-permeable cGMP analog 8-bromo-cGMP, Conversely, this pathway was inJübited by t he 1-10난 inhi bitor zinc protoporphyrin IX(ZnPP IX) and the selective inl뼈itor of guanylate cyc1ase‘ lH-[l , 2, 4Joxad iazole[4‘ 3-aJquinoxal in-l-one (ODQ) , We report herein the pathway that connects SP along with other modulators 。f neuroimmunoregulationto the induction of HO-l and t he inflammatory mediator MIP-3a /CCL20 in IPDL cell s‘ which play an important role in the development 01' periodontitis or inflamrnation during orthodontic tooth movem