Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

The development of existing radioactive waste (RI waste) management technologies has been limited to processing techniques for volume reduction. However, this approach has limitations as it does not address issues that compromise the safety of RI waste management, such as the leakage of radioactive liquid, radiation exposure, fire hazards, and off-gas generation. RI waste comes in various forms of radioactive contamination levels, and the sources of waste generation are not fixed, making it challenging to apply conventional decommissioning and disposal techniques from nuclear power plants. This necessitates the development of new disposal facilities suitable for domestic use. Various methods have been considered for the solidification of RI waste, including cement solidification, paraffin solidification, and polymer solidification. Among these, the polymer solidification method is currently regarded as the most suitable material for RI waste immobilization, aiming to overcome the limitations of cement and paraffin solidification methods. Therefore, in this study, a conceptual design for a solidification system using polymer solidification was developed. Taking into account industrial applicability and process costs, a solidification system using epoxy resin was designed. The developed solidification system consists of a pre-treatment system (fine crush), solidification system, cladding system, and packing system. Each process is automated to enhance safety by minimizing user exposure to radioactive waste. The cladding system was designed to minimize defects in the solidified material. Based on the proposed conceptual design in this paper, we plan to proceed with the specific design phase and manufacture performance testing equipment based on the basic design.

Graphite Isotope Ratio Method (GIRM) can be used to estimate plutonium production in a graphite-moderated reactor. This study presents verification results for the GIRM combined with a 3-D polynomial regression function to estimate cumulative plutonium production in a graphite-moderated reactor. Using the 3-D Monte-Carlo method, verification was done by comparing the cumulative plutonium production with the GIRM. The GIRM can estimate plutonium production for specific sampling points using a function that is based on an isotope ratio of impurity elements. In this study, the 10B/11B isotope ratio was chosen and calculated for sampling points. Then, 3-D polynomial regression was used to derive a function that represents a whole core cumulative plutonium production map. To verify the accuracy of the GIRM with polynomial regression, the reference value of plutonium production was calculated using a Monte-Carlo code, MCS, up to 4250 days of depletion. Moreover, the amount of plutonium produced in certain axial layers and fuel pins at 1250, 2250, and 3250 days of depletion was obtained and used for additional verification. As a result, the difference in the total cumulative plutonium production based on the MCS and GIRM results was found below 3.1% with regard to the root mean square (RMS) error.

흑연 동위원소 비율법(GIRM)은 비핵화 검증 도구로써 흑연감속로의 플루토늄 생산량을 예측하는데 사용된다. 원자로가 가동되면 238U의 중성자 포획 반응에 의해 플루토늄이 생성되어 축적되고 동시에 흑연 내 불순물도 핵반응을 통해 다른 핵종 으로 바뀌기 때문에 플루토늄의 생성량과 불순물의 농도는 일정한 상관 관계를 갖는다. 이러한 상관관계에도 불구하고 어느 특정 시점에서의 불순물의 농도는 불순물의 초기 농도에 의존하기 때문에 불순물의 초기 농도가 알려지지 않으면 불순물의 절대 농도만으로 플루토늄 생산량을 예측하는 것은 불가능하다. 그러나 불순물의 초기 동위원소 비율은 초기 불순물 농 도에 상관없이 알려져 있기 때문에 불순물의 동위원소 비율과 플루토늄 생산량의 관계는 흑연감속로에서 플루토늄 생성량을 예측하는 유용한 도구가 될 수 있다. 흑연동위원소 비율법의 지표 원소로 Boron, Lithium, Chlorine, Titanium, Uranium 등이 이용되는 것으로 알려져 있다. 위 지표원소의 동위원소 비와 플루토늄 생성량 사이의 상관 관계가 초기 불순물 농도에 의존하지 않는지를 네 가지 다른 흑연 불순물 조성을 이용하여 평가하였다. 10B/11B, 36Cl/35Cl, 48Ti/49Ti, 235U/238U은 흑연의 초기 불순물 농도에 상관없이 누적 플루토늄 생성량과 일관된 상관 관계를 갖는다. 이러한 원소들은 다른 원소의 핵반응에 의해 해당 원소의 동위원소가 생성되지 않기 때문이다. 반면 6Li/7Li과 플루토늄 생성량의 상관관계는 흑연 내 불순물의 초기 농도에 의존한다. 7Li은 6Li의 중성자 포획 반응에 의해서 생성되기도 하지만 10B의 (n, α)반응으로도 생성되는 것이 더 지배 적이기 때문에 10B의 초기 농도가 7Li의 생성량에 영향을 미치는 것이다. 따라서 Lithium은 흑연 동위원소 비율법을 위한 지표 원소로 적절하지 않음을 알 수 있다.

Hydroxyapatite (HA), which is an important calcium phosphate mineral, has been applied in orthopedics, dentistry, and many other fields depending upon its morphology. HA can be synthesized with different morphologies through controlling the synthesis method and several parameters. Here, we synthesize various morphologies of HA using two simple methods: hydrothermal combustion and solution combustion. The phase purity of the synthesized HA is confirmed using X-ray diffractometry. It demonstrates that pure phased hydroxyapatite can be synthesized using both methods. The morphology of the synthesized powder is examined using scanning electron microscopy. The effects of pH and temperature on the final powder are also investigated. At 140 oC, using the hydrothermal method, nano-micro HA rods with a hexagonal crystal structure can be synthesized, whereas using solution combustion method at 600 oC, a dense cubic morphology can be synthesized, which exhibits monoclinic crystal structures.

배경/목적: 2012년 급성췌장염의 애틀랜타 분류 개정안이 발표되었고 이후 널리 이용하고 있다. 본 연구는 1992년 애틀랜타 분류와 2012년 개정안을 이용하여 급성췌장염 환자를 분류한 후 임상경과를 비교하였다. 방법: 2012년 1월부터 2013년 7월 사이 대구경북지역 6개 대형 병원에 입원한 총 574명의 급성췌장염 환자를 대상으 로 후향적 연구를 시행하였다. 1992년 애틀랜타 분류와 2012 년 개정안을 이용하여 중등도 평가를 시행하고 인구 통계 자료, 장기부전, 국소합병증, 입원기간, 임상경과 등을 분석하였다.결과: 대상 중 377명(65.7%)이 남성이었다. 연령의 중간값 은 55.4세였다. 급성췌장염의 2대 원인은 음주(238명, 41.5%)와 담석(193명, 33.6%)이었다. 2012년 개정안에 따르 면 경증췌장염은 356명(62%), 중등췌장염은 197명(34.3%), 중증췌장염은 21명(3.7%)이었다. 입원기간은 중증도 증가에 따라 통계학적으로 유의하여 증가하였다(경증 5.9일, 중 등 8.3일, 중증 13일, p <0.001). 모든 경증 및 중등췌장염 환자는 임상적으로 호전되었다. 하지만, 호전을 보이지 않은 11명은 모두 중증췌장염에 속했다. 결론: 애틀랜타 분류 개정안이 급성췌장염의 임상경과를 예측하는 데 있어 좋은 방법이다.

Popular 3D printers as a new industrial revolution attract public attention. 3D printing will radically convergence many of the business models that companies take for granted today. And recently they were trying to convergence with the game industry. In this respect, this study is designed to figure out the current situations of board game and to suggest its convergence service model. To achieve this, this paper is to analyse board game cases of domestic and foreign relate to 3D printing. Finally, we suggest new service model to make on-off line contents of board game industry using 3D printing.

The cultivation methods of Acanthopanax in Korea need to be optimized. Hence, this study investigated the effect of different fertilizer ratios and planting dates on the growth and acanthoside D content of two (2) Acanthopanax species. The current recommended fertilizer rate of 10.5-8.5-8.5 kg/ha- (N-P2O5-K2O, respectively) produced the best plant growth of Acanthopanax. For the first year, the acanthoside D content resulting from the 2P (2x phosphate) rate was higher than that from the other fertilizer ratios, yet there were no significant differences resulting from the various treatments for either Acanthopanax divaricatus or Acanthopanax koreanum. Similarly, for the second year, there were no significant differences in the acanthoside D content resulting from the various fertilizer ratios, although for both species the acanthoside D content resulting from the 2P rate was slightly higher than that from the other treatments. Therefore, the results indicated that doubling the amount of phosphate increased the acanthoside D content. Plus, the optimum planting date with respect to growth and productivity for Acanthopanax divaricatus was identified as April 15. The cultivation methods of Acanthopanax in Korea need to be optimized. Hence, this study investigated the effect of different fertilizer ratios and planting dates on the growth and acanthoside D content of two (2) Acanthopanax species. The current recommended fertilizer rate of 10.5-8.5-8.5 kg/ha- (N-P2O5-K2O, respectively) produced the best plant growth of Acanthopanax. For the first year, the acanthoside D content resulting from the 2P (2x phosphate) rate was higher than that from the other fertilizer ratios, yet there were no significant differences resulting from the various treatments for either Acanthopanax divaricatus or Acanthopanax koreanum. Similarly, for the second year, there were no significant differences in the acanthoside D content resulting from the various fertilizer ratios, although for both species the acanthoside D content resulting from the 2P rate was slightly higher than that from the other treatments. Therefore, the results indicated that doubling the amount of phosphate increased the acanthoside D content. Plus, the optimum planting date with respect to growth and productivity for Acanthopanax divaricatus was identified as April 15. The cultivation methods of Acanthopanax in Korea need to be optimized. Hence, this study investigated the effect of different fertilizer ratios and planting dates on the growth and acanthoside D content of two (2) Acanthopanax species. The current recommended fertilizer rate of 10.5-8.5-8.5 kg/ha- (N-P2O5-K2O, respectively) produced the best plant growth of Acanthopanax. For the first year, the acanthoside D content resulting from the 2P (2x phosphate) rate was higher than that from the other fertilizer ratios, yet there were no significant differences resulting from the various treatments for either Acanthopanax divaricatus or Acanthopanax koreanum. Similarly, for the second year, there were no significant differences in the acanthoside D content resulting from the various fertilizer ratios, although for both species the acanthoside D content resulting from the 2P rate was slightly higher than that from the other treatments. Therefore, the results indicated that doubling the amount of phosphate increased the acanthoside D content. Plus, the optimum planting date with respect to growth and productivity for Acanthopanax divaricatus was identified as April 15. The cultivation methods of Acanthopanax in Korea need to be optimized. Hence, this study investigated the effect of different fertilizer ratios and planting dates on the growth and acanthoside D content of two (2) Acanthopanax species. The current recommended fertilizer rate of 10.5-8.5-8.5 kg/ha- (N-P2O5-K2O, respectively) produced the best plant growth of Acanthopanax. For the first year, the acanthoside D content resulting from the 2P (2x phosphate) rate was higher than that from the other fertilizer ratios, yet there were no significant differences resulting from the various treatments for either Acanthopanax divaricatus or Acanthopanax koreanum. Similarly, for the second year, there were no significant differences in the acanthoside D content resulting from the various fertilizer ratios, although for both species the acanthoside D content resulting from the 2P rate was slightly higher than that from the other treatments. Therefore, the results indicated that doubling the amount of phosphate increased the acanthoside D content. Plus, the optimum planting date with respect to growth and productivity for Acanthopanax divaricatus was identified as April 15. The cultivation methods of Acanthopanax in Korea need to be optimized. Hence, this study investigated the effect of different fertilizer ratios and planting dates on the growth and acanthoside D content of two (2) Acanthopanax species. The current recommended fertilizer rate of 10.5-8.5-8.5 kg/ha- (N-P2O5-K2O, respectively) produced the best plant growth of Acanthopanax. For the first year, the acanthoside D content resulting from the 2P (2x phosphate) rate was higher than that from the other fertilizer ratios, yet there were no significant differences resulting from the various treatments for either Acanthopanax divaricatus or Acanthopanax koreanum. Similarly, for the second year, there were no significant differences in the acanthoside D content resulting from the various fertilizer ratios, although for both species the acanthoside D content resulting from the 2P rate was slightly higher than that from the other treatments. Therefore, the results indicated that doubling the amount of phosphate increased the acanthoside D content. Plus, the optimum planting date with respect to growth and productivity for Acanthopanax divaricatus was identified as April 15.

Background : Korean mountain ginseng (Panax ginseng C.A. Meyer) are difficult to industrially apply because of its scarcity and high cost. Advances in plant biotechnology have made it possible to produce mountain ginseng on a large scale using adventitious root cultures in bio-reactors. This study was conducted to develop a cosmetic emulsion using ginsenoside and physiological activity - enhanced raw materials by fermentation process. Methods and Results : Wild ginseng adventitious roots were fermented with Pediococcus pentosaceus HLJG 0702 (KACC 81017BP). ginsenoside contents was analysed by using HPLC. Antioxidant activity was measured by DPPH and ABTS radical scavenging activity and whitening effect was measured by tyrosinase inhibitory activity. After microfluidizer processing was performed to prepare emulsions with homogenized particles, particle size and distribution were measured through a transmission electron microscop e(TEM). Particle stability compares pH, viscosity, light and zeta potential. When fermented with Pediococcus pentosaceus HLJG 0702, the highest change rates of Rg3, Rk1 and Rg5 were shown and the antioxidant activity was increased. The whitening effect was 73.2 ± 0.9% when treated at 100 ㎍/㎖, 1.5 times higher than the control. The optimum particle size and distribution were shown to be 418.0 ± 14.9 ㎚ for 6 times treatment with 0 - 10 times microfluidizer treatment. Stability was about 3% in pH, viscosity and light test. the zeta potential was found to be homogeneous at –33.33 mV. Conclusion : Pediococcus pentosaceus HLJG 0702 Fermented Wild ginseng adventitious roots were found to have effective ingredients and improved physiological activity. We have also developed emulsions that exhibit optimal particle size and distribution

Background : The minor saponins produced by the hydrolysis of a major saponins sugar. The minor saponins has high absorption and efficacy compared to major saponin. The acid treatment, heat treatment and fermentation with minor saponin research has been actively conducted. This study was performed in order to investigate the bioconversion of ginsenoside Rg5 of fermented wild ginseng adventitious roots by using lactic acid bacteria. Methods and Results : 20g adventitious roots of ginseng was added to water (10-fold v/w). 10% (v/v) of lactic acid bacteria (Pediococcus pentosaceus HLJG0702[KACC 81017BP]) were inoculated with wild ginseng adventitious roots. For the fermentation process the inoculated samples were transferred to culture room for 1, 3 and 5 days. The fermented samples were dried at room temperature and extracted with 70% ethanol. Extract was concentrated completely at 50 ℃ and Rg5 was analysed by using HPLC. Results showed no significant difference the dry weight of non-fermented and fermented wild ginseng adventitious roots. During the fermentation process, the pH changed from 5.7 to 4.2. HPLC analysis showed higher ginsenoside Rg5 (39.588 mg/g) at 3 days. Conclusion : The fermentation of ginseng root can increase the Rg5 contents and minor saponin composition. This process may be used to enhance the minor saponin thereby increasing in fermented property of wild ginseng adventitious roots.

This study investigated possible involvement of photoperiodic regulation in reproductive endocrine system of female olive flounder. To investigate the influence on brain-pituitary axis in endocrine system by regulating photoperiod, compared expression level of Kisspeptin and sbGnRH mRNA in brain and FSH-β, LH-β and GH mRNA in pituitary before and after spawning. Photoperiod was treated natural photoperiod and long photoperiod (15L:9D) conditions from Aug. 2013 to Jun. 2014. Continuous long photoperiod treatment from Aug. (post-spawning phase) was inhibited gonadal development of female olive flounder. In natural photoperiod group, the Kiss2 expression level a significant declined in Mar. (spawning period). And also, FSH-β, LH-β and GH mRNA expression levels were increasing at this period. However, in long photoperiod group, hypothalamic Kiss2, FSH-β, LH-β and GH mRNA expression levels did not show any significant fluctuation. These results suggest that expression of hypothalamic Kiss2, GtH and GH in the pituitary would change in response to photoperiod and their possible involvement of photoperiodic regulation in reproductive endocrine system of the BPG axis.

Olive flounder (Paralichthys olivaceus) is one of the commercial important flatfish species in Korea. The ocular signal transduction pathway is important in newly hatched flounders because it is closely involved in the initial feeding phase thus essential for survival during the juvenile period. However, the study of gene expression during ocular development is incomplete in olive flounder. Therefore we examined the expression analysis of specifically induced genes during the development of the visual system in newly hatched flounders. We searched ocular development-involved gene in the database of expressed sequence tags (ESTs) from olive flounder eye and this gene similar to arrestin with a partial sequence homology. Microscopic observation of retinal formation corresponded with the time of expression of the arrestin gene in the developmental stage. These results suggest that arrestin plays a vital role in the visual signal transduction pathway of the retina during ocular development. The expression of arrestin was strong in the ocular system during the entirety of the development stages. Our findings regarding arrestin have important implications with respect to its biological role and evolution of G-protein coupled receptor (GPCR) signaling in olive flounder. Further studies are required on the GPCR-mediated signaling pathway and to decipher the functional role of arrestin.

One-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis (1D SDS-PAGE) was used to determine whether it would provide improved resolving power of hordein proteins concomitant with improved identification of Korean barley cultivars and germplams. This system gave rapid and reproducible separations of hordein polypeptides. Total fourteen of clear and easily scorable subunits were identified in Korean barley cultivars and germplasms and their polymorphic constitutions could provide biochemical genetic information in progeny analysis and endosperm quality improvement in barley breeding programs. Each hordein polypeptides residing in B, C, and D hordein pattern designations were scored to prepare a cultivar catalogue of protein patterns. On the basis of this character, 7 hordein polypeptide patterns were constructed from 108 barley cultivars and experimental lines. The molecular weight of hordein subunits in Korean barley cultivars and experimental lines varied in the range of 98 to 48 kDa. In contrast, less polymorphic hordein polypeptides were found in the low protein barley lines including malting barleys than those found in Korean barley cultivars and experimental lines