Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

The development of existing radioactive waste (RI waste) management technologies has been limited to processing techniques for volume reduction. However, this approach has limitations as it does not address issues that compromise the safety of RI waste management, such as the leakage of radioactive liquid, radiation exposure, fire hazards, and off-gas generation. RI waste comes in various forms of radioactive contamination levels, and the sources of waste generation are not fixed, making it challenging to apply conventional decommissioning and disposal techniques from nuclear power plants. This necessitates the development of new disposal facilities suitable for domestic use. Various methods have been considered for the solidification of RI waste, including cement solidification, paraffin solidification, and polymer solidification. Among these, the polymer solidification method is currently regarded as the most suitable material for RI waste immobilization, aiming to overcome the limitations of cement and paraffin solidification methods. Therefore, in this study, a conceptual design for a solidification system using polymer solidification was developed. Taking into account industrial applicability and process costs, a solidification system using epoxy resin was designed. The developed solidification system consists of a pre-treatment system (fine crush), solidification system, cladding system, and packing system. Each process is automated to enhance safety by minimizing user exposure to radioactive waste. The cladding system was designed to minimize defects in the solidified material. Based on the proposed conceptual design in this paper, we plan to proceed with the specific design phase and manufacture performance testing equipment based on the basic design.

Physical and electrochemical qualities were analyzed after KOH activation of a direct methanol fuel cell using needle coke as anode supporter. The results of research on support loaded with platinum-ruthenium suggest that an activated KOH needle coke container has the lowest onset potential and the highest degree of catalyst activity among all commercial catalysts. Through an analysis of the CO stripping voltammetry, we found that KOH activated catalysis showed a 21% higher electrochemical active surface area (ECSA), with a value of 31.37 m2/g, than the ECSA of deactivated catalyst (25.82 m2/g). The latter figure was 15% higher than the value of one specific commercial catalyst (TEC86E86).

The mammary gland is a complex organ, made up of various cell types that work together for mil synthesis. A previous study had established a clonal cell line from primary bovine mammary alveolar cells (MAC-T) for the study of bovine milk production and synthesis. In this study, we transplanted MAC-T bovine alveolar cell line to BALB/C nude mice for regeneration of bovine mammary gland alveolar ducts. The MAC-T cells were suspended with matrigel and injected into the dorsal tissue of 8 weeks old male BALB/C nude mice. After 6 weeks, the injected cells were showed typical morphology of the tubuloalveolar female glands by histological analysis. It was made the branching ducts that were surrounded by smooth muscle with small alveoli budding off the ducts. In addition, the epithelial markers CK14 and CK18 were expressed within the duct-like structure. Prolactin was detected in the duct interior in these CK14 and CK18 positive cells but not in the non-transplanted MAC-T cells. These results showed that duct-like tissue had been successfully formed after 6 weeks of transplantation of the CK14 and CK18 positive MAC-T cells into mice dorsal tissue. This mouse model will be a useful tool for further research on the bovine mammary gland.

Insect pollinators of the endanger orchid Cypripedium japonicum were surveyed and identified during two years, as a part of a conservation project of the orchid at Jukyeup-san and Hwaak-san (Mt.), South Korea. In total 40 individuals of 16 species in 4 families were identified. The dominant family was Halictidae, and Lasioglossum exiliceps Vachal visited the most frequently C. japonicum during the surveys. The average visiting frequency was 2.5 individuals per hour and the highest 4.3, from 12:00 – 13:00 in a day. After 15:00 insects did not visit the flowers at all. However, all of the visiting insects were found to not carry a pollinium or pollens of the orchard on their bodies; pollen carryover by any of the visiting insects did not occur at all. The orchid seems to require certain pollinators in particular body thickness due to its unique pollination mechanism. The orchid has two exit route openings, around 1 cm in diametre, where the entrapped insects can exit and an anther is situated just in front of each opening. It was inferred that a pollen carrier should be around 1 cm in body thickness. Therefore, the candidate species as the proper pollen carriers can be Tetralonia nipponensis Perez, Xylocopa appendiculata circumvolans Smith and Bombus consobrinus Dahlbom among the surveyed visitors.

Polyhedrin is the major component of the nuclear viral occlusions produced during replication of the baculovirus Autographa californica multicapsid nucleopolyhedrovirus (AcMNPV). To enhance the production efficiency of foreign protein in baculovirus expression system, the effects of various polyhedrin fragments were investigated by fusion expressing them with the enhanced green fluorescent protein (EGFP). Recombinant viruses were generated to express EGFP fused with polyhedrin fragments based on the previously reported minimal region for self-assembly and the KRKK nuclear localization signal (NLS). The marked increase of EGFP by these fusion expressions was confirmed through protein and fluorescence intensity analyses. Among the fusion-expressed protein in nucleus and cytoplasm, the most hyper-expression was observed in the fusion of amino acids 19 to 110 and 32 to 59 of polyhedrin. Also these fragments, some degradation of only the fused polyhedrin was observed in the fusion of amino acids 19 to 85 and 32 to 85. The production of E2 protein, which is a major antigen of classical swine fever virus, was dramatically increased by fusion expression with polyhedrin amino acids 19 to 110, and its preliminary immunogenicity was verified using experimental guinea pigs. The production of luciferase was approximately two folds increased by fusion expression with polyhedrin amino acids 32 to 59, and its activity was measured using Luminometer. This study suggests a new option for higher expression of useful foreign recombinant protein using the partial polyhedrin fusion expression in baculovirus.

Flexible transparent conducting films (TCFs) were fabricated by dip-coating single-wall carbon nanotubes (SWCNTs) onto a flexible polyethylene terephthalate (PET) film. The amount of coated SWCNTs was controlled simply by dipping number. Because the performance of SWCNT-based TCFs is influenced by both electrical conductance and optical transmittance, we evaluated the film performance by introducing a film property factor using both the number of interconnected SWCNT bundles at intersection points, and the coverage of SWCNTs on the PET substrate, in field emission scanning electron microscopic images. The microscopic film property factor was in an excellent agreement with the macroscopic one determined from electrical conductance and optical transmittance measurements, especially for a small number of dippings. Therefore, the most crucial factor governing the performance of the SWCNT-based TCFs is a SWCNT-network structure with a large number of intersection points for a minimum amount of deposited SWCNTs.

To enhance the production efficiency of foreign protein in baculovirus expression system, the effects of polyhedrin fragments were investigated by fusion expression them with the enhanced green fluorescence protein (EGFP). Recombinant viruses were generated to express EGFP fused with polyhedrin fragments based on the minimal region for self-assembly and the KRKK nuclear localization signal (NLS). The increase of EGFP production by fusion expressions was confirmed through protein and fluorescence intensity analyses. The importance of nuclear localization for enhanced production of EGFP was shown by the mutation of the NLS within the fused polyhedrin fragment. Among the fusion expressed protein in cytoplasm, the most hyper-expression was observed in the fusion of amino acids 32 to 59 of polyhedrin. Polyhedrin fragment fusion expression with classical swine fever virus E2 protein also resulted hyper-enhanced expression of E2 protein. However, the fusion expression of porcine circovirus ORF2 with polyhedrin fragment did not show significant enhance of ORF2 production. These results suggested that the enhancement of foreign protein production when fused with polyhedrin is caused by the enhanced stability of expressed protein.

Pluripotent stem cells can be derived from both pre- and post-implantation embryos. Embryonic stem cells (ES cells), derived from inner cell mass (ICM) of blastocyst are naïve pluripotent and epiblast stem cells (EpiSCs) derived from post-implantation epiblast are primed pluripotent. The phenotypes and gene expression patterns of the two pluripotent stem cells are different each other and EpiSCs thought to be in a more advanced pluripotent (primed pluripotent state) than mouse ES cells (naïve pluripotent state). Therefore, we questioned whether EpiSCs are less potential to be differentiated into specialized cell types in vitro. EpiSCs were isolated from 5.5～6.5 day post coitum mouse embryos of the post-implantation epiblast. The EpiSCs could differentiate into all tree germ layers in vivo, and expressed pluripotency markers (Oct4, Nanog). Interestingly, EpiSCs also were able to efficiently differentiate into neural stem cells (NSCs). The NSCs differentiated from EpiSCs (EpiSC-NSCs) expressed NSC markers (Nestin, Sox2, and Musasi), self-renewed over passage 20, and could differentiate into two neural subtypes, neurons, astrocytes and oligodendrocytes. Next, we compared global gene expression patterns of EpiSC-NSCs with that of NSCs differentiated from ES cells and brain tissue. Gene expression pattern of brain tissue derived NSCs were closer to ES cell-derived NSCs than EpiSC-NSCs, indicating that the pluripotent stem cell-derived somatic cells could have different characteristics depending on the origin of pluripotent stem cell types. * This work was supported by the Next Generation Bio-Green 21 Program funded by the Rural Development Administration (Grant PJ 008009).

True hermaphrodites are animals of equivocal sex in which both male and female gonads develop simultaneously. The frequency of true hermaphroditism is higher in pigs than in other domestic animals. Two Korean pigs were diagnosed with true hermaphroditism showing ovotestes, epididymes, penes, and uteri. Histomorphologically, the testicular tissues consisted of Sertoli cells that were devoid of spermatogenic germ cells and showed proliferation of interstitial cells. However, the uteri were of normal architecture and had well-developed uterine endometrial glands. The samples were 38, XX female karyotype without the sex-determining region Y (SRY) gene. The findings of this study could contribute to the understanding of true hermaphroditism in the Korean pig industry. * This work was supported by a grant (Code# PJ008148) from BioGreen21 Program, Rural Development Administration, Republic of Korea.

The aim of this study was to examine the effect of acteoside (the cyclin-dependent kinase inhibitor) on the SCNT efficiency with adult fibroblasts in dog. Canine adult fibroblasts were obtained from muscle and cell cycle of fibroblasts was synchronized by culturing to confluency, serum starvation and treating with 30 μM acteoside for 48 h. Cell cycle stages, cell cytotoxicity (apoptosis) and, prduction of reactive oxygen species (ROS) were analyzed using flow cytometry. The canine cells, prepared by confluent-cell culture or treating with 30 μM acteoside for 48 h, were injected into enucleated in vivo matured oocytes, the couplets were electrical fused and activated by calcium ionomycin. SCNT embryos using acteoside-treated fibroblasts were surgically transferred into oviducts of estrus cycle synchronized recipient dogs. In cell cycle synchronization (G0/G1), there was no significant difference between serum starvations (83.9%) and acteoside treated groups (81.3%) that were higher than confluent group (78.5%). In production of apoptosis, confluent and acteoside treated groups (4.3 and 4.5%, respectively) were generated less than serum starvation group (21.8%). In case of ROS, serum starvation group was induced a significantly higher than other groups. After synchronization of the donor cell cycle, either confluent or acteoside treated, cells were placed with enucleated in vivo-matured dog oocytes, fused by electric stimulation, activated, and transferred into naturally estrus-synchronized surrogates. Fusion and cleavage rate of acteoside treated group were 64.1 and 41.5%, which were higher than those of confluent group (53.9 and 20.6%, respectively). The reconstructed embryo development rates to 4-cell and 8-cell in acteoside treated group were 29.5 and 14.8%, respectively, while confluent group showed 11.1 and 3.2%, respectively. Total 54 SCNT embryos using acteoside-treated fibroblasts were transferred into oviducts of 2 recipient dogs and one recipient finally delivered one puppy, whereas din`t detected pregnancy on transfer of cloned embryos reconstructed with confluent cells in 6 surrogate dogs. In conclusion, the results of the current study demonstrated that canine fibroblasts could be successfully arrested at the G0/G1 stage with reduced the formation of ROS and apoptosis after acteoside treatment. This results may contribute to improve the effi-ciency of canine SCNT. * This research was supported by iPET (Grants 110056-3), Ministry for Food, Agriculture, Forestry and Fisheries, Republic of Korea.

Acteoside acts as an anti-oxidative activity and anti-apoptosis in the cells. But, it has been not studied on maturation and development of porcine oocytes. The aims of the present study were to examine the effects of acteoside on the morphological progress of meiosis, developmental competence, and ROS in porcine oocytes. Oocytes were matured in tissue culture medium-199, supplemented with acteoside at various concentrations: 0 (control), 10, 30 and 50 μM. The oocytes maturation rates of groups supplemented with acteoside were no significantly different (81.13, 85.96, 82.95 and 83.68%, respectively). Level of ROS was significantly decreased in acteoside treated group. Furthermore, the parthenogenetic blastocyst rate was significantly improved in 10 μM acteoside treated group compared with control group (44.83 vs. 27.75%). And we investigated effect of acteoside on the oocytes condition represented by cytoplasmic maturation by homogeneous distribution and formation of cytoplasmic organelles and regulation of apoptosis-related genes. In the results. during IVM, 10 μM acteoside treated oocytes showed that the mitochondria and lipid droplet were smaller and homogeneous distribution in cytoplasm compare with control oocytes. And reverse transcription polymerase chain reaction (RTPCR) of parthenogenetic blstocysts revealed that acteoside increased the anti-apoptotic genes (Mcl-1, Bcl-2 and Bcl-xL), whereas reduced the expression of pro-apoptotic genes (Bax and Bak). In conclusion, based on the results, the effect of acteoside on IVM was not attractive. However, in acteoside treated group, cytoplasmic maturation seemed to be improved with morphologically uniform distribution of cytoplasmic organelles. Furthermore, embryonic development in acteoside treated group was significantly highly increased than that of non-treated group. Our results represents that addition of acteoside to the IVM medium has a beneficial effect in physiology of porcine oocytes, providing a improved method for porcine oocytes in vitro. * This work was supported by a grant (Code# PJ008148) from BioGreen21 Program, Rural Development Administration, Republic of Korea.

The objective of the current study was to describe in vitro embryo production in Hanwoo, analyzing oocytes yield and embryo production. The effects of oocytes production and the number of OPU procedures per animal on embryo production were also evaluated. OPU was done every 3～4 days during experimental period and collected oocytes were fertilized in vitro in both OPU and needle puncture groups. First, we compared the recovery rate of oocytes based on OPU session (Experiment 1). The average of collected oocytes was calculated from every 10 session. The average number of total oocytes recovered per animalonsessionwas 5.16 (mean). Second, we compared the recovery rate base on collection period of OPU (Experiment 2). The following results show the difference of the number of recovered oocytes in every month during the procedure between the months of session. Every animal shows the constant number of recovered oocytes for the first 5 months. However, the recovery rate of oocytes was decreased from month 6 to 8. Third, we compared the developmental rate to blastocyst in two groups (Experiment 3). Oocytes by needle puncture were fertilized with frozen-thawing semen; the cleavage rate 24～48 h after in vitro fertilization (IVF) was 75.8% and blastocyst development rate was 18.8% in needle puncture group. Even though there is lower cleavage rate after IVF in OPU group (61.1%), blastocyst development rate was higher compared with needle puncture group (28.4%). In conclusion, Blastocyst developmental rate could be increased by OPU than classical method of needle puncture. Improvement of bio- technique in collecting oocytes could be applied to understand the reproductive physiology in cattle, expecially Hanwoo. Therefore, further investigation should be done to clarify the efficiency and advantage of OPU involved in reproduction in animals and human being.

The objective of this study was to evaluate in vitro production of bovine embryos in Hanwoo. Oocytes were collected by ovum pick up (OPU) from ovaries of genetically high-value Hanwoo or by needle puncture from ovaries of slaughtered cattle. OPU was done every 3 4 days duing experimental period and collected oocytes were fertilized in vitro in both OPU and needle puncture groups. First, We compared the in vitro maturation rate in two groups (Experiment 1). 545 oocytes were recoverd from 4 females by 32 trials of OPU and then 433 oocytes were shown MⅡ stage after in vitro maturation (79.4%). In case of needle puncture group, 1905 oocytes were collected and then 1420 oocytes were matured to MⅡ stage during in vitro culture(74.5%). Second, we compared the developmental rate to blastocyst in two groups (Experiment 2). 1420 oocyte by needle puncture were fertilized with frozen-thawing semen; the cleavage rate 24 48 h after in vitro fertilization (IVF) was 88.6% and blastocyst development rate was 20.5% in needle puncture group. Even though there is lower cleavage rate after IVF in OPU group (84.8%), blastocyst development rate was higher compared with needle puncture group (26.4%). In conclusion, Blastocyst developmental rate could be increased by OPU than classical method of needle puncture. Improvement of bio-technique in collecting oocytes could be applied to understand the reproductive physiology in cattle, expecially Hanwoo. Therefore, further investigation should be done to clarify the efficiency and advantage of OPU involved in reproduction in animals and human being. This research was suppoted by Imsil-gun agricultural technology service center.

Porcine Circovirus Type2 (PCV2), a single-stranded DNA virus associated with Postweaning multisystemic wasting syndrome(PMWS) of swine, has two major open reading frames, ORF1 and ORF2. The genomic size and molecular weight of ORF2 is respectively 699bp, 28kDa. ORF2 encodes the capsid protein (structural protein) that has type-specific epitopes and is very immunogenic and associated with the induction of neutralizing antibodies, suggesting its potential use in diagnostic assays as well as vaccine development. For efficient production of the capsid proteins, we expressed the PCV2 ORF2 gene with baculovirus in the insect cells. In this study, PCV2 ORF2 was appropriately ligated into the baculovirus transfer vector, pBacPAK9 and pB9-Acpol19-110-EK. Sf21 cells were transfected with a mixture of the purified recombinant transfer vector and bAcGOZA. We generated and purified recombinant viruses containing PCV2 ORF2, and named rAc-B9-PCV2ORF2 and rAc-B9-19-110-EK-PCV2ORF2, respectively. Expression levels of capsid fusion proteins with a partial polyhedrin region of AcNPV more increased than recombinant proteins from non-fusion expressed. Also, expression efficiency increased over time and differed at MOI. As a results, fusion expression of porcine circovirus type2 ORF2 using baculovirus could be utilized as an alternative expression method to produce recombinant antigen against PCV2 infection and is worthy of further investigation.

Polyhedrin is the major component of the nuclear viral occlusions produced during replication of the baculovirus Autographa californica multicapsid nuclear polyhedrosis virus (AcMNPV). To enhance the expression level of baculovirus vector system, we constructed several fusion vectors using various fragments of the polyhedrin. The polyhedrin fragments were genetically fused to the enhanced green fluorescent protein (eGFP) under the control of polyhedrin promoter, and their expressions were analyzed in Sf21 insect cells. Expression of the fusion protein was identified by SDS-PAGE and Western blot analysis using anti-GFP and anti-Polyhedrin. The expression level of eGFP was markedly increased by the fusion of partial polyhedrin. Also, the fluorescence intensity of fusion proteins was higher than that of non-fusion protein. Confocal laser scanning microscopy demonstrated that fusion proteins were localized to the cytosol or nucleus of insect cells. In additional, the glycoprotein E2 (gE2) of classical swine fever virus (CSFV) expressed by the these vectors was dramatically increased and its immunogenicity was proofed using experimental animal guinea pigs that were immunized with the partial polyhedrin containing gE2. This study provides a new option for the higher expression of useful foreign recombinant protein by using the partial polyhedrin in BEVS.

Background : Management of air temperature are known to primarily affecting on physiological properties and yield in plant. Methods and Results : The effect of air temperature on characteristics of photosynthesis and chlorophyll fluorescence in Schisandra chinensis Baillon were investigated under controlled temperature using growth chamber. Net photosyntheis rate, transpiration was measured at 1,000 μmol m-2 s-1 of photon flux density and chlorophyll fluorescence was analyzed by OJIP method. Net photosyntheis rate and transpiration rate was higher in treatment of 25℃. As results of chlorophyll fluorescence by OJIP analysis, maximum quantum yield (Fv/Fm) of photosystem II (PSII) and PIabs was higher in treatment of 25℃ which reflects the relative reduction state of PSII. But in treatment of 35℃ the relative activities per reaction center such as ABS/RC, DIo/RC were higher than in treatment of 25℃ which implied that the relative reduction of electron transport at PSI and increasement of photo inhibition at reaction center. Conclusion : This result implies that 25℃ of air temperature may be a adequate temperature to improving the efficiency of photosynthesis through controlling a photosystem in Schisandra chinensis Baillon.