Prepreg is an abbreviation of Preimpregnated Materials. It is a sheet-type product in which a matrix is ​​impregnated with reinforced fiber. The prepreg has very different properties depending on the orientation of the fibers and the weaving method, and the orientation of the fibers plays an important role in determining the mechanical strength of CFRP. Short and randomly oriented reinforcing fibers show isotropy, while long, unidirectional reinforcing fibers exhibit anisotropic behavior and are strongest when the applied load is parallel to the reinforcing fibers. Classification by the direction of the fiber is divided into unidirectional, orthogonal, multiaxial, and the like. Uni-directional refers to a state in which almost all fibers in the fabric are aligned in one direction. When the fibers used as reinforcing materials are aligned in one direction, the fibers are used in a straight line without twisting during the fabric production process, and there is an advantage in that the amount of fibers used as a whole can be minimized. A uni-directional prepreg exhibits different cutting forces depending on the stacking orientation angle. In this experiment, the optimal cutting conditions for a uni-directional prepreg 45 degree orientation angle specimen are presented.

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9–12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

In this paper, the dynamic response was analyzed by performing linear dynamic analysis using historic earthquake loads on twisted-shaped structures and fixed structure among free-form high-rise structures with atypical elevation shape following prior studies. In addition, the dynamic characteristics of the analysis models according to the plane rotation angle of the twisted structure were compared and analyzed. As a result of the analysis, as the plane rotation angle of the twisted structure increased, the interlayer deformation rate increased in the high-rise part of 50th floors or more. The story shear force and the story absolute acceleration were similar in the entire structure. In the case of the story shear force, the response of the twisted shape model was rather reduced in the middle part. As a result of analyzing the dynamic response, the vulnerable layer where the response amplification of the twisted structure occurs was found to be 31st story.

Background: Based on the understanding of the muscle activation relationship between the infraspinatus and posterior deltoid muscles to according to the angle of motion during external rotation on glenohumeral joint, effective shoulder joint strengthening exercise for the prevention and rehabilitation of shoulder injury due to muscle strength imbalance can be performed by achieving the ideal muscle activity ratio during exercise. Objectives: To compare and analyze the muscle activation changes and activity ratio of the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle. Design: Quasi-randomized trial. Methods: The study included 48 healthy male and female adults who provided informed consent for participation in the study. All the subjects performed isometric glenohumeral external rotation by setting the angle of motion to 30°, 45°, and 60° using a 5 kg resistance weight pulley. On surface electromyography, the differences in muscle activation and activity ratio between the infraspinatus and posterior deltoid muscles were investigated. Results: A significant difference in muscle activation was found in the comparison between the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle (P<.05). The muscle activation levels of the infraspinatus and posterior deltoid muscles were highest at the external rotation angles of 30° and 60°, respectively. The muscle activity ratio between the infraspinatus and posterior deltoid muscles also showed a significant difference (P<.05) and was highest at the shoulder external rotation angle of 30°. Conclusion: The findings of this study suggest that muscle activity is the highest at the shoulder external rotation angle of 30° in healthy individuals.

Background: Alignment of the lower limb is an important factor, influencing balance and gait in kinematics and kinetics, in patients with and without a flat arched foot. Flat arched foot are associated with the range of motion (ROM) of the hip and alignments of the knee joints, is strongly influenced. Objects: The purpose of this research was to investigate the relationship between hip joint ROM and quadriceps angle (Q-angle), by dividing them into two groups according to the presence or absence of flat feet, using a navicular drop test (NDT) and resting calcaneal stance position (RCSP). Methods: Forty elderly patients were allocated to the experimental group (flat foot group, n1=20) or the control group (non-flat group, n2=20). Universal and digital goniometer, tractograph and tape measure were used to determine the related changes in the hip ROM, Q-angle, NDT and RCSP. joint (right, r=.803, p<.001), (left, r=.951, p<.001) were highly correlated with NDT, and also, was moderately correlated with Q-angle (right, r=.562, p=.019), (left, r=.757, p<.001). Passive internal ROM of the hip joint (right, r=.742, p=.001), (left, r=.922, p<.001) were highly correlated with NDT, and also, was moderately correlated with RCSP (right, r=-.530, p=.029) and with Q-angle (right, r=.710, p=.001), (left, r=.698, p=.002) in the flat foot group. However, no strong correlation among the hip ROM, NDT, RCSP and Q-angle were found in the non-flat foot group. Conclusion: This research may provide evidence of the correlations between hip internal ROM and flat foot.

Displacement response of structure is valuable information for monitoring an structure integrity. However, measuring the displacement response is difficult than other structure responses, such as acceleration, strain, and angle. So, previous researches have focused on displacement estimation technique using measured acceleration. The displacement estimation methods also have weakness that filtering noise of measured data is so complicate. The estimated displacement might be diverged because of the measuring noise. Because of these reasons, this study focused on rotation angle. This study developed a algorithm for estimating displacement and structure deformed shape using rotation angle.

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles (0°, 20°, 40°) with a 30° hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both 40° (p=.006) and 20° (p=.010) compared to a 0° hip external rotation angle. G Med muscle activity increased significantly at 20° (p=.013) compared to a 40° hip external rotation angle. The G Max/HAM activity ratio increased significantly at both 40° (p=.004) and 20° (p=.014) compared to a 0° hip external rotation angle. The G Med/HAM activity ratio increased significantly at 20° (p=.013) compared to a 40° hip external rotation angle. In conclusion, 40° and 20° hip external rotation angles are recommended to increase G Max activity, and 20° hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and 30° hip abduction in healthy subjects.

The purpose of this study was to assess the intra-rater test-retest reliability of tibial external rotation angle measurement using a smartphone-based photographic goniometer, DrGoniometer (DrG) compared to a three-dimensional motion analysis system (Vicon). The current study showed an interchangeable method using DrG to measure the tibial external rotation angle in standing knee flexion at . Twelve healthy subjects participated in this study. A rest session was conducted 30 minutes later for within-day reliability and five days later for between-day intra-rater test-retest reliability. To assess the validity of the measurement using DrG, we used a three dimensional motion analysis system as a gold standard to measure the angle of tibial external rotation. Intra-class correlation coefficient (ICC) and the standard error of measurement (SEM) values were used to determine the within- and between- day intra-rater test-retest reliability of using DrG and a three dimensional motion analysis system. To assess validity, Pearson correlation coefficients were used for two measurement techniques. The measurement for tibial external rotation had high intra-rater test-retest reliability of within-day (ICC=.88) and between-day (ICC=.83) reliability using DrG and of within-day (ICC=.93) and between-day (ICC=.77) reliability using a three-dimentional motion analysis system. Tibial external rotation angle measurement using DrG was highly correlated with those of the three-dimensional motion analysis system (r=.86). These results represented that the tibial external rotation angle measurement using DrG showed acceptable reliability and validity compared with the use of three-dimensional motion analysis system.

The purpose of this study was to compare EMG activity for pectoralis major muscle during shoulder movement with various abduction angle and rotation position in supine position. Fifteen healthy subjects were recruited for this study. All subjects performed shoulder horizontal adduction holding a 2 kg dumbbell in shoulder abduction 40˚, 70˚, 90˚, 130˚, 160˚ with shoulder neutral, internal rotation (IR), and external rotation (ER). Surface EMG activity was recorded from pectoralis major clavicle part and pectoralis major sternum part for 5 seconds and EMG activity was normalized to the value of maximal voluntary isometric contraction (%MVIC). Dependent variables were examined with 3 (Neutral, IR, ER) 5 (40˚, 70˚, 90˚, 130˚, 160˚) analysis of variance with repeated measures. The EMG activity of pectoralis major muscle was significantly different between shoulder abduction angles and between shoulder rotation positions (p<.05). The highest value of EMG activity of pectoralis major clavicle part among shoulder abduction angles was in 70˚ and, 90˚ in that order. The highest value of EMG activity of pectoralis major sternum part among shoulder abduction angles was in and 130˚, 90˚ in that order. According to the rotation degree, shoulder ER showed the highest value and IR showed the lowest value in both muscle parts. These results suggest that shoulder abduction 70˚, 90˚, 130˚ will be effective during manual muscle testing (MMT) and strengthening exercise for pectoralis major muscle. It is also supposed that shoulder ER is the efficient posture for strengthening of pectoralis major muscle.

어깨뼈 검사는 일상생활, 스포츠 활동 시에 어깨관절의 후측부나, 후외측부에 강한 외력이 가해서 발생하는 직접외 상에 의한 경우와 상완부에 주로 외전, 신전, 외회전력이 가해져 어깨관절 탈구 등 병변의 유무를 관찰하는데 유용하게사용되고 있다. 본 연구의 목적은 어깨관절 후전사방향촬영(shoulder PA oblique projection, scapula Y-view)의 촬영각도에 따른 영상의 왜곡을 방지하고 방사선학적 진단에 가장 유용한 촬영 각도를 알아보고자 하였다. 어깨뼈체부와봉우리(acromion) 및 부리돌기(coracoid process)는 Y자를 이루게 되는데 10°에서는 어깨뼈와 봉우리사이의 각도가협착되어 나타나고, 20°~25°에서는 Y자에 위팔뼈머리가 겹쳐 보이며, 어깨관절과의 위치도 적절해 보였다. 35°에서는위팔뼈머리가 Y자에 겹쳐 보이지만, 위팔뼈머리와 어깨관절이 왜곡되어 보였다. 환자체위는 45° 거상시킬 때 가장 적합한 측면상을 관찰되며, 봉우리(acromion) 및 부리돌기(coracoid process)도 Y 자를 이루었다.