간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 45 No. 4 (2022년 12월) 28건
21.
2022.12
구독 인증기관 무료, 개인회원 유료
Agrophotovoltaic (APV) system is an integrated system producing crops as well as solar energy. Because crop production underneath Photovoltaic (PV) modules requires delicate management of crops, smart farming equipment such as real-time remote monitoring sensors (e.g., soil moisture sensors) and micro-climate monitoring sensors (e.g., thermometers and irradiance sensors) is installed in the APV system. This study aims at introducing a decision support system (DSS) for smart farming in an APV system. The proposed DSS is devised to provide a mobile application service, satellite image processing, real-time data monitoring, and performance estimation. Particularly, the real-time monitoring data is used as an input of the DSS system for performance estimation of an APV system in terms of production yields of crops and monetary benefit so that a data-driven function is implemented in the proposed system. The proposed DSS is validated with field data collected from an actual APV system at the Jeollanamdo Agricultural Research and Extension Services in South Korea. As a result, farmers and engineers enable to efficiently produce solar energy without causing harmful impact on regular crop production underneath PV modules. In addition, the proposed system will contribute to enhancement of the smart farming technology in the field of agriculture.
4,000원
22.
2022.12
구독 인증기관 무료, 개인회원 유료
This paper addresses the maintenance optimization problem in multi-component systems in which parts are connected in series, carrying out several missions interspersed with scheduled finite breaks. Due to limited time or resources, maintenance actions can be only carried out on a limited set of components. The decision maker then has to decide which components to maintain to ensure a pre-specified performance level during next mission. Most of the existing models in the literature usually assume only one system and enough spare parts. However, there are situations in which maintenance is required for multiple systems of the same type. To overcome this restrictive assumption, this study optimizes the maintenance problem considering the lack of repair parts and cannibalism for many identical systems. This study presents two optimization models with different objectives to solve the problem and analyzes the results so that the decision maker can decide. The results of this study are expected to be used for the maintenance of multiple systems of the same type, such as swarm drones.
4,300원
23.
2022.12
구독 인증기관 무료, 개인회원 유료
As the uncertainty of technology development and market needs increases due to changes in the global business environment, the interest and demand for R&D activities of individual companies are increasing. To respond to these environmental changes, technology commercialization players are paying great attention to enhancing the qualitative competitiveness of R&D. In particular, R&D companies in the marine and fishery sector face many difficulties compared to other industries. For example, the R&D environment is barren, it is challenging to secure R&D human resources, and it is facing a somewhat more difficult environment compared to other sectors, such as the difficulty in maintaining R&D continuity due to the turnover rate of researchers. In this study, based on the empirical data and patent status of private companies closely related to the R&D technology status, big data analysis, and simulation analysis methods were used to identify the relative position of individual companies' R&D capabilities and industrial perspectives. In this study, based on industrial evidence and patent applications closely related to the R&D technology status, the R&D capabilities of individual companies were evaluated using extensive data analysis and simulation analysis methods, and a statistical test was performed to analyze if there were differences in capabilities from an industrial point of view. At this time, the industries to be analyzed were based on all sectors, the maritime industry, the fisheries industry, and the maritime industry integration sector. In conclusion, it was analyzed that there was a certain level of difference in the R&D capabilities of individual companies in each industry sector, Therefore when developing a future R&D capability system, it was confirmed that it was necessary to separate the population for each industry and establish a strategy.
4,200원
24.
2022.12
구독 인증기관 무료, 개인회원 유료
The army is concerned about the decrease in enlistment resources due to the low birth rate and the weakening of military combat power due to the shortening of the military service period. Now, the military's quantitative growth is no longer limited and it is a time for qualitative growth. To this end, the Army has been applying the Israeli learning method Havruta to recruit training to improve the quality of training since 2019. After applying Havruta, several scholars have studied the effect of recruit training applying Havruta. As a result, it was verified that recruit training applying Havruta improves the inner motive, creativity, and military service value of trainees. This study investigated how trainees' inner motive, creativity, and military service value affect their satisfaction and achievement. In addition, it was studied whether the effect of recruit training applied with Havruta on achievement differs according to the educational background (high school graduate or higher) and military family (professional soldiers within 4th degree) of the trainees. To this end, a survey was conducted on 472 recruits, and the structural relationship between each variable and the moderating effect were analyzed using the structural equation model. As a result of the study, military service value did not affect training satisfaction. Also, there was a difference in the effect of creativity on training satisfaction according to the educational background of new recruits, and there was a difference in the effect of military service value on training satisfaction and training achievement according to military family members. The purpose of this study is to contribute to the improvement of the army's recruit training development plan and effective training system.
4,000원
25.
2022.12
구독 인증기관 무료, 개인회원 유료
Due to the issue of the sustainability in transportation area, the number of electric vehicles has significantly increased. Most automakers have decided or planned to manufacture the electric vehicles rather than carbon fueled vehicles. However, there are still some problems to figure out for the electric vehicles such as long charging time, driving ranges, supply of charging stations. Since the speed of growing the number of electric vehicles is faster than that of the number of charging stations, there are lack of supplies of charging stations for electric vehicles and imbalances of the location of the charging stations. Thus, the location problem of charging stations is one of important issues for the electric vehicles. Studies have conducted to find the optimal locations for the charging stations. Most studies have formulated the problem with deterministic or hierarchical models. In this paper, we have investigated the fluctuations of locations and the capacity of charging stations. We proposed a mathematical model for the location problem of charging stations with the vehicle routing problem. Numerical examples provide the strategy for the location routing problems of the electric vehicles.
4,000원
26.
2022.12
구독 인증기관 무료, 개인회원 유료
Recently, unmanned logistics delivery systems, such as UAV (Unmanned Aerial Vehicle, written as drone below) and autonomous robot delivery systems, have been implemented in many countries due to the rapid development of autonomous driving technology. The development of these new types of advanced unmanned logistics delivery systems is essential not only to become a leading logistics company but also to secure national competitiveness. In this paper, the application of the unmanned logistics delivery system was investigated in terms of market trends, overall technology level of last mile delivery drone and autonomous delivery robot. The direction of response to changes in the last mile delivery service market was checked through a comparison of the technological level between domestic companies that produce last mile devices and advanced foreign companies. As a result of this technology level analysis, the difference between domestic companies and advanced companies was shown using tables and figures to show their relative levels. The results of this analysis reflect the opinions of experts in the field of last-mile delivery technology. In addition, the technology level of unmanned logistics delivery systems for each country was analyzed based on the number of related technology patents. Lastly, insights for the technology level analysis of unmanned last mile delivery systems were proposed as a conclusion.
4,000원
27.
2022.12
구독 인증기관 무료, 개인회원 유료
The injection molding process is a process in which thermoplastic resin is heated and made into a fluid state, injected under pressure into the cavity of a mold, and then cooled in the mold to produce a product identical to the shape of the cavity of the mold. It is a process that enables mass production and complex shapes, and various factors such as resin temperature, mold temperature, injection speed, and pressure affect product quality. In the data collected at the manufacturing site, there is a lot of data related to good products, but there is little data related to defective products, resulting in serious data imbalance. In order to efficiently solve this data imbalance, undersampling, oversampling, and composite sampling are usally applied. In this study, oversampling techniques such as random oversampling (ROS), minority class oversampling (SMOTE), ADASYN(Adaptive Synthetic Sampling), etc., which amplify data of the minority class by the majority class, and complex sampling using both undersampling and oversampling, are applied. For composite sampling, SMOTE+ENN and SMOTE+Tomek were used. Artificial neural network techniques is used to predict product quality. Especially, MLP and RNN are applied as artificial neural network techniques, and optimization of various parameters for MLP and RNN is required. In this study, we proposed an SA technique that optimizes the choice of the sampling method, the ratio of minority classes for sampling method, the batch size and the number of hidden layer units for parameters of MLP and RNN. The existing sampling methods and the proposed SA method were compared using accuracy, precision, recall, and F1 Score to prove the superiority of the proposed method.
4,000원
28.
2022.12
구독 인증기관 무료, 개인회원 유료
This paper introduces a container loading problem and proposes a theoretical approach that efficiently solves it. The problem is to determine a proper weight of products loaded on a container that is delivered by third party logistics (3PL) providers. When the company pre-loads products into a container, typically one or two days in advance of its delivery date, various truck weights of 3PL providers and unpredictability of the randomness make it difficult for the company to meet the total weight regulation. Such a randomness is mainly due to physical difference of trucks, fuel level, and personalized equipment/belongings, etc. This paper provides a theoretical methodology that uses historical shipping data to deal with the randomness. The problem is formulated as a stochastic optimization where the truck randomness is reflected by a theoretical distribution. The data analytics solution of the problem is derived, which can be easily applied in practice. Experiments using practical data reveal that the suggested approach results in a significant cost reduction, compared to a simple average heuristic method. This study provides new aspects of the container loading problem and the efficient solving approach, which can be widely applied in diverse industries using 3PL providers.
4,000원
1
2
