This study was conducted to evaluate maize downy mildew resistance using spreader row technique in Cambodia. A total of forty maize lines were used in this experiment. Seven Korean varieties and seven breeding lines showed high infection rates (80~100%) and highly susceptible (HS) to downy mildew disease in both spring and fall. Also most of nested association mapping (NAM) parent lines were highly susceptible (HS). Meanwhile three inbred lines, Ki3, Ki11, and CML228, showed highly resistant (HR) or resistant (R) in spring and moderately resistant (MR) in fall. These three lines were already known as resistant inbred lines against downy mildew disease. It appears that spreader row technique was suitable for selection of maize downy mildew resistance in Cambodia. The incidence of downy mildew was influenced by weather conditions, especially relative humidity and temperature. Among several inoculation methods to screen for downy mildew resistance, this spreader row technique is effectively and easily used in the field of Southeast Asia.

초단기 홍수예보를 위한 주요자료로서 최근 기상레이더의 중요성이 크게 부각되고 있다. 기상레이더는 넓은 지역에 걸쳐 실시간으로 강우현상 감시가 가능하며 지상우량계로는 파악이 불가능한 미계측유역을 통과하는 강우장의 이동 및 변화 파악이 가능한 장점이 있다. 본 연구는 강우장의 공간적 분포와 레이더 강우세포를 추적하는 강우장 예측 해석방안을 수립하였다. 이를 위해 강우장의 공간적인 이동을 고려하기 위해 강우장의 바람장 이류(advection) 패턴을 추출하여 각 강우세포가 가지는 이동방향 및 속도를 고려한 강우장 추적기법을 통하여 강우장을 예측하였다. 본 연구를 통하여 개발된 기상레이더 강우장 상관분석 기법을 활용한 초단기강우예측 결과는 집중호우시 홍수 예·경보를 위한 수문모형의 입력자료 로 활용이 가능할 것으로 사료된다.

Construct2는 영국 게임 엔진 제작 회사 Scirra에서 개발한 Html5을 기반으로 한 2D 게임 엔진이다. 전 세계적으로 사용하는 Construct2 게임 엔진은 2D 게임 엔진에서 가장 뛰어난 기 술력과 인지도가 높은 엔진으로 성장했다. 이러한 엔진을 바탕으로 제작 된 ‘콩빈&도미노’는 물 리기술을 활용한 도미노 방식의 캐쥬얼 게임으로 애플 앱스토어 및 구글 플레이 스토어에 출시 하여 상용화 된 모바일 게임이다. ‘콩빈&도미노’의 제작 과정의 사례와 함께 게임 엔진 품질 평 가를 진행하여 더 좋은 콘텐츠 생산에 기여할 수 있는 게임 엔진 활용 연구를 진행하였으며, 향후 본 연구를 통해 다양한 게임 콘텐츠 제작에 더 용이할 수 있는 게임 개발 프로세스를 지 원하여 게임 산업 발전에 기여하고자 한다.

본 연구에서는 실측자료를 기반으로 한 새로운 면적강우량 산정기법인 ‘레이더 폴리곤 기법(Radar polygon Method, PRM)’을 제시하였다. RPM은 (1) 강우공간분포의 실측자료인 기상레이더 자료를 이용하여 지점관측소가 위치한 곳에서의 강우강도와 주변지역의 강우강도를 비교하여 유사강우 발생지도 작성; (2) 위의 단계를 관측소별로 반복하여 각 관측소별 유사강우 발생 확률 지도 작성; (3) 주어진 격자에서의 각 관측소의 유사강우 발생 확률의 비교를 통한 지배범위 결정의 알고리즘으로 관측소별 가중치를 결정하는 방법이다. RPM 방법을 안성천 유역에 적용하여 Thiessen법과 결과를 비교하였 다. 안성천 유역의 경우 RPM과 Thiessen방법에 근거한 다각형의 공간적 형태는 관측소 위치의 강우 특성에 따라 차이를 보였으나 관측소별 가중치 값의 차이는 크지 않았다. 본 연구는 관측기간 및 정확도의 문제로 인하여 제한적으로 활용되어 온 레이더 강우관측자료의 새로운 활용분야를 개척하였다는 점에서 큰 의미를 찾을 수 있다.

3D 게임에서 오브젝트의 위치를 파악하거나 사실감을 높이기 위하여 광원의 시점에서 정점 의 깊이 값을 계산하는 그림자 매핑 기법이 많이 사용된다. 그림자 맵의 깊이 값은 월드 좌표 를 통해 계산되기 때문에 월드 좌표가 변하지 않는 정적 오브젝트는 깊이 값을 갱신할 필요가 없다. 본 논문에서는, (1) 렌더링 속도를 향상시키기 위하여 한번만 저장하는 정적 오브젝트 깊 이 값과 매번 갱신하는 동적 오브젝트의 깊이 값을 다중 렌더 타겟을 이용하여 따로 관리한다. 또한 (2) 쿼터 뷰 기반 3D 게임에서 동적 오브젝트 그림자 품질을 높이기 위하여 광원의 위치 가 카메라를 따라다니며 동적 오브젝트에 가깝게 변동한다. 제안하는 방법의 효율성을 3D 게임 의 다양한 정적 및 동적 오브젝트 구성에 따른 실험을 통하여 검증하였다.

In this paper, we propose an image-based measurement method of structure dynamic characteristics to assess the damage of structure in a more cost-effective way than traditional structure health monitoring system.

Recently, demand for systematic and scientific management system is increasing as national consciousness of safety improved. Various studies on monitoring and management techniques of important facilities are being carried out, but it is difficult to conduct swift countermeasures in case of real disasters. Specially, damage inflicted by disasters would be preventable when stability of construction sites as in downtown area or tunnel construction sites where human and material damage is expected to be high can be identified promptly. This study developed a scene visualization measurement sensor using LED and applied on the safety management of structures. The scene visualization measurement technique can change the paradigm of existing measurement methods. The technique will allow users to determine safety of structures promptly and easily in real time without professional help. Also, it will reduce professional manpower for structure management during or after completing the construction, and it can minimize damage from disaster occurrence through quick response when unusual symptoms occur.

To evaluate the compressive characteristics of concrete with high strain rate, SHPB(Split Hopkinson Pressure Bar) test is typically used. To verify the applicability and reliability of SHPB test for concrete, direct displacement image analysis with high speed camera was performed using plain concrete and UHPC.

The damage cases by debris flow and each investigation techniques used by the institutes associated with debris flow were analysed. It was concluded that considering urban debris flow characteristics and the purpose of investigation is essential to establish reasonable debris-flow damage investigation technique.

This study started with two questions. The first question is ‘Why does organic agriculture want to be linked with cooperative?’ The second is ‘What is the charac-teristics of the mutual relationship between organic agriculture and cooperative?’, especially in Wonju. Up to now, there have been various kinds of discussion about cooperation between organic agricultural campaign and cooperative in Wonju. But there are few concrete data showing what role cooperative plays in the cyclical process of production -distribution-consumption of organic agriculture. Thus, we conducted a survey applying the Delphi technique to the 35 organic agricultural specialists active in Wonju. First, small-scale family farm producers established a social economic cooperative network in around 2003 to perform ‘the activities of innovators’ through forming an organization. Producers moved from the stage in which they were supported one-sidedly by consumers to the stage where they could ‘lead’ cooperation. Each farm organization built a vertical integration, and horizontal cooperative systems with other farm organizations. But, practical cooperative activities have remained in the doldrums. They tend to show trends deviating from the principles of organic agriculture and cooperative. Second, the relationship between producers and consumers in Wonju can be described as ‘producer-consumer cooperative type’. In Wonju, the producers’ organization is not a sub-contractor which simply deliver organic agricultural products to producers’ cooperative, but is an equal subject which creates its own value chain. The cooper-ative (cooperative organization) leads distribution and consumption of organic agricultural products and mutual communication. But, the closeness between pro-ducers and consumers has got loosened. And, it is problematic that the proportion of local food consumption in Wonju is very low. There is a very strong tendency to ride the central distribution system of producers’ cooperative coalition. Conse-quently, it is necessary for producers’ cooperatives in Wonju to run a local food distribution system based on the ‘cooperative system among cooperatives’.

The objective of this study was to investigate non-point sources (NPS) pollution and prioritize management areas affected by NPS pollution in the Saemangeum Watershed. AHP (Analytical Hierarchy Process) technique was selected to prioritize sub-watersheds for effectively managing NPS pollution in this study areas. Generation properties of NPS pollution, discharge properties of NPS pollution, and runoff properties of NPS pollution were selected and set for AHP. Weighted descriptors including indicators like numbers of livestock, land- and livestock-system loads, rainfall, and impervious area ratio were generalized from 0 to 1 and multiply each index based on screened 17 survey data. The results were visualized as maps which enable resource managers to identify sub-watersheds for effective improving water quality. The sub-watersheds located in Gongdeok-Myeon, Yongji-Myeon, Hwangsan-Myeon of Gimje-Si were selected for managing NPS pollution control areas. This result presented that these sub-watershed are more affected by the pollution from livestock-system than from land-system. The finding from this study can be used to screen sub-watersheds that need further assessment by managers and decision-makers within the study area.

콘크리트 표면의 상태에 따라 염화물은 증가 또는 감소하게 되며 이는 철근부식 및 내구수명에 매우 중요한 인자가 된다. 콘크리트의 내구성 저하를 방지하기 위해 표면함침과 같이 많은 표면강화 기술이 개발되었으나 이중 콘크리트 구조와 확산계수의 시간의존성을 고려한 염화물 해석방법은 매우 제한적이다. 본 논문에서는 표면 강화된 이중구조 콘크리트에 대해 시간의존성 확산계수를 도입하여 염화물 해석기법을 제안하였으며, 역해석을 통하여 기존의 실험결과와 비교하였다. 2년간 비말대, 해수중, 조석대 상태에 노출된 표면 함침된 콘크리트 시편에 대해 표면염화물량과 확산계수를 도출하고 Life-365에서 제안한 확산계수 식과 비교 분석하였다. 시간의존성을 고려한 결과 비말대 시편의 오차는 0.28에서 0.20 수준으로, 조석대 시편은 0.29에서 0.11 수준으로, 해수중에서는 0.54에서 0.40 수준으로 오차가 감소함을 알 수 있었다. 또한 Life365에서 사용되는 확산계수식을 사용할 경우, 과다한 확산계수로 인해 상대오차가 커지고 높은 침투깊이(e)와 낮은 확산계수비(D1/D2)를 필요로 함을 알 수 있다.

Urbanization can be significantly affected the hydrologic cycle by increasing flood discharge and heat flux. In order to mitigate these modifications in urban areas, Low Impact Development (LID) technique has been designed and applied in Korea. In order to estimate runoff reduction rate using SWMM LID model, the characteristics of five LID techniques was firstly analyzed for water balance. Vegetated swale and green roof were not reduce flood discharge nor infiltration amount. On the other hand, porous pavement and infiltration trench were captured by infiltration function. The flood reduction rate with LID is substantially affected by their structures and properties, e.g., the percentage of the area installed with LID components and the percentage of the drainage area of the LID components.

식도암은 병변의 길이가 길고 깊이의 불균질성으로 인하여 방사선의 균일한 선량분포를 얻기 어렵다. 이러한 문제점을 개선해 보고자 Half beam 법을 이용하여 선량분포의 균질성을 극복해 보고자 환자의 영상을 바탕으로 하여 Normal beam과 Half beam을 이용하여 각각 치료계획을 세워 표적체적포함율과 선량체적곡선, 일치성지수와 균질성지수를 상호 비교하고, 인접정상장기인 심장, 척수, 폐를 비교해 보고자 한다. 실험결과 Half beam을 이용한 치료계획이 표적체적포함율과 선량체적곡선 그리고 일치성지수와 균질성지수가 우수하였으며 정상조직 보호측면에서도 미미하지만 우수한 것으로 나타났다. 하지만 정확한 환자자세가 확보되지 않으면 부작용이 발생할 수 있다. 따라서, 기하학적으로 정확한 환자의 위치잡이를 수반한 Half beam의 적용은 선량적으로 유용할 수 있을 것으로 사료된다.

기포가 포함된 다상흐름의 측정은 중요함에도 불구하고 많은 제약이 있었다. 특히, 공극률이 높은 다상 흐름은 밀도차의 급격한 변화와 두꺼운 공기-물 경계면으로 인해 측정이 매우 어렵다. 본 연구에서는 공극률에 상관없이 기포흐름을 측정할 수 있는 기포영상유속측정법과 다발 광섬유유동측정계를 소개하고자 한다. 기포영상측정기법의 경우, 화상측정시 발생하는 원근에 의한 오차를 최소화하고 추정할 수 있는 피사계 심도에 대한 계산방법을 제시하여 정도 분석을 위한 방안을 제시하였다. 다발 광섬유유동측정계는 얇은 광섬유의 특성을 이용해 다발로 제작하여 측정률을 증가시키고자 하였다. 제시된 두 기법을 기포플룸에 적용하여 신뢰도를 검토하였으며 잘 일치하는 것을 확인하였다. 소개된 기법으로 대표적인 하천 다상흐름인 도수흐름을 측정하여 그 적용성을 검토하였다.

Anthocyanin, a group of purple or reddish flavonoids, have been recognized as health-promoting functional food ingredients due to antioxidant activity. For this reason, plant breeders are trying to increase the anthocyanin contents using methods such as classical breeding and biotechnological approaches. To broaden the mutants population, seeds of colored wheat variety (K4191) were irradiated by using 250 Gy gamma irradiation. Individual 968 M4 plants were grown in Korea Atomic Energy Research Institute field. Many mutant phenotypes were shown: seed color variation, abnormal spike shape, awning formation, heading and ripening time, plant height, ripening period, super dwarf, etc. To identify the inheritance traits of colored-wheat, individual lines were maintained the spike base classified by generation. Characteristics per spike and plant were piled up to construct for mutant database. In the future, fixed descent will be analyzed the anthocyanin contents or other phytonutrients by ultra-performance liquid chromatography (UPLC). Expression of seed color-related transcription factors and anthocyanin biosynthetic pathway genes will be examined.

In the mountain streams in Jeju Island, strong turbulence and roughness usually made it nearly impossible to utilize most of intrusive instrumentation for streamflow discharge measurements. Instead, a non-intrusive fixed electro-magnetic wave surface velocimetry (fixed EWSV: Kalesto) became alternatively popular in many representative streams to measure stream discharge seamlessly. Currently, Kalesto has shown noteworthy performance with little loss in flood discharge measurements and also has successfully provided discharge for every minute. However, Kalesto has been operated to regard its measured one-point velocity as the representative mean velocity for the given cross-section. Therefore, it could be highly possible to potentially encompass discharge measurements errors. In this study, we analyzed the difference between such Kalesto discharge measurements and other alternative concurrent discharge measurements such as Acoustic Doppler Current Profiler (ADCP) and mobile EWSV which were able to measure velocity in multi-points in the cross-section. Consequently, Kalesto discharge deviated from ADCP discharge in amount of 48% for relatively low flow, and more than 20% difference for high flow compared with mobile EWSV discharge measurements. These results indicated that the one-point velocity measured by Kalesto should be used as a cross-sectional mean velocity, rather it should be accounted for as an index-velocity in conjunction with directly measured cross-sectional mean velocity by using more reliable instrumentations. After inducing Kalesto Discharge Correction Coefficient (KDCC) that actually means relationship between index velocity and cross-sectional mean velocity, the corrected discharge from Kalesto was significantly improved. Therefore, we found that index velocity method should be applied to obtain better accuracy of discharge measurement in case of Kalesto operation.

This study was performed to select the performance-based evaluation items of concrete retaining wall. This study used Delphi Technique. As a result of survey, this study gained 17 condition assessment items and 7 safety evaluation items at final round. The results will be utilized as the basis for the performance-based evaluation.

The monitoring technique using acoustic emission(AE) and microseismicity(MS) are recently used in domestic geotechnical structures. Since AE amd MS rapidly increase before the large-scale failure of geotechnical structures, they can be used as an indicator of failure symptoms. This study shows case studies, especially applied to the rock slope and tunnel.

The expression 'Resistance capacity' in bridge engineering indicates the certain qualitative level of important characteristics that a bridge possesses, against the various types of action or load. Even if the bridges are constructed with similar feature, the resistance capacities evaluated from these bridges are different due to the uncertainties. This study focuses on presenting a resistance capacity model of bridge which considers the uncertainties caused from the statistical characteristics of bridge members. The developed model is applied to evaluate the lifetime safety/reliability of a bridge. Based on the result of this evaluation, this study aims to improve the effectiveness of bridge maintenance works.