The antioxidative effect of ethanol extract of ginger on mackerel pike(Colorabis saira) flesh was investigated by periodically measuring TBA value and perioxide value(POV) during storage. The ethanol extract of ginger was added to minced mackerel pike flesh and the fish oil by concentration(2%, 4%, 6%, 8%). Then the minced flesh was storaged at -5℃ and the fish oil was incubated at 40℃. The TBA values of minced flesh were approximately increased in inverse proportion to concentration of ginger extract. Peroxide values were attended with the same effect as TBA value in the aggregate. In addition, The relationship between TBA37℃-2hrs of the minced flesh and their lipid oxidation during storage at -5℃ for 4 weeks was observed(r=O.98). TBA37℃-2hrs can be expressed as the susceptibility to lipid oxidation of minced mackerel pike flesh during storage. In the results, the antioxidative effect of alcohol extract of ginger on mackerel pike flesh was observed.

The Hydrolysis kinetics of Benzoyl Styrene Derivatives[I]~[IV] was investigated by ultraviolet spectrophotometery in 5% dioxane-H2O at 40℃. The structure of these compounds were ascertained by means of ultraviolet, melting point, IR and NMR spectra. The rate equations which were applied over a wide pH range (pH 1.0~13.0) were obtained. The substituent effects on Benzoyl styrene derivatives[I]~[IV] were studied, and the hydrolysis were facilitated by electron attracting groups. On the basis of the rate equation and substitutent effect and final product, the plausible hydrolysis reaction mechanism was proposed: At pH 1.0~pH 9.0, not relevant to the hydrogenl ion concentration, neutral H2O molecule competitively attacked on the double bond. By contrary. Above pH 9.0, It was proportional to concentration of hydroxidel ion.

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

The 2-packaged polyurethane coatings were synthesized, blending pheylmodified polyesters(of which synthetic methods were reported in the previous paper), Desmodur L-75(polyisocyanate wide1y used for coatings), wetting-dispersing agent, white pigment. etc. A variety of coating properties were tested for the coating treatment polyurethane coationgs. Compared with conventional 2-packaged polyure-thane coating, abrasion resistance and lightness index difference of the ones synthesized in the present work were somewhat decreased, but the coating properties such as hardness, gloss specular, cross hatch adhesion. etc. were improved. Especially, resistance against chemical reagents and salt were strikingly improved. In addition. the coationgs had short drying time and long pot-life. This shows that the coationgs are appropriate for rapid drying coatings.

In this outline, the stability of solid/liquid dispersion was theoretically investigated the matter from all angles by using the modified DLVO theory. The stability was handled various considerations such as a production and characteristics of electrical double layer, total interaction(VT) that consisting of attractive force(VA) and repulsion(VR). coagulation, the stability ratio(W), critical flocculation concentration (cfc) and zeta potential(ξ) etc. It was possible for us to examine with the stability ratio(W), critical flocculation concentration (cfc) and zeta potential(ξ) that may estimation of stability of solid/liquid dispersion experimentally.

Polyamic acid alkylamine (N, N-dimethylhexadecylamine)(PAAS)염을 합성하여 그 합성여부를 확인하였으며 PAAS염의 Langmuir막의 π-A 등온선 및 표면 전위 특성 등을 조사 하였다. Langmuir-Blodgett법에 의하여 PAAS염의 LB막을 여러종류의 기관에 누적하였으며 누적여부를 자외선 흡수 스펙트럼 및 적외선 투과 스펙트럼을 이용하여 조사하였다. 그리고 PAAS LB막을 열처리에 의하여 이미드(imide)화시켜 폴리이미드 LB막을 제조하였으며 그 이미드화 여부를 자외선 및 적외선 스펙트럼을 이용하여 조사하였다.

Ultra thin films of HDSM-CuPc(Tetra-3-hexadecylsulphamoylcopperphthalocya-nine) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT- IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of ultrathin films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscpies.

MDABM and MDAEW, as a accelerating weight loss agents, were prepared by adding water to myristyldimethylbenzylammonium bromide(MDAB) and myristyldimethylethylammonium ethyl sulfate (MDAE) synthesized. As a result of weight loss finishing of the MDABW and MDAEW with NaOH on PET fiber, the ratio of weight loss of MDABW was very larger than that of MDAEW. This result showed that quaternary ammonium bromide had higher weight loss effect than quaternary ammonium sulfate, and the ratio of weight loss was greatly varied with the kind of quaternary ammonium salts used. In these conditions, proper treatment concentration, treatment time, and treatment bath ratio were about 8g/l, 6O~90min, and 40:1~50:1, respectively.

In order to investigate of the Influence of Mg2+, Ca2+ on α-linolenic acid converted into the eicosapentaenoic acid(EPA) and docosahexaenoic acid(DHA) forming in plasma lipid and in liver microsomes of rabbit, the animals were fed on the perila oil rich α-linolenic acid or sardine oil rich EPA and DBA diet for 4 weeks were examined. In plasma, liver lipid, Mg2+ was influenced on arachidonic acid(AA), EPA, DHA formative from α-linolenic acid in perilla oil, but stearic acid was increased, Ca2+ was Influenced on stearic acid increased and DHA was decreased. In phospholipid, Mg2+, Ca2+ was influenced on stearic acid increased and DHA was decreased in perilla oil.

1-(2-hydroxyethyl)-2-undecyl-2-imidazoline[I] was converted into various types of sulfonated or sulfated amphoteric surfactants as following. 1-(2-hydroxyethyl)-1-(3-sulfonatedpropyl)-2-undecyl-2-imidazolium[III] 1-(2-sulfatedethyl)-1-methyl-2-undecyl-2-imidazolium[IV] 1-dioxylethylene methyl sulfonated-1-methyl-2-undecyl-2-imidazoliun[V] N-[N'-(2-hydroxyethyl)-N-(3-sulfonatedpropylammonio]ethyl dodecanoyl amide[VI] Mono sodium N-[N'-(2-hydroxyethyl)-N'-disulfonatedpropylammonio]ethyl dodecanoyl amide[VII] N-[N'-(2-hydroxyethyl-N'-(2-hydroxypropl-N'(3-sulfonatedpropyl)ammonio] ethyl dodecanoyl amide[VIII] The alkylimidazolines could be readily hydrolyzed to give amidoamines, but by quaternerization, hydrolysis stability of imidazoline and amide type amphoteric surfactantes were increased in the alkali and acid conditions. Also, at least three carbon chains introduce to the main group, water solubility was sparingly increased.

Amphoteric surfactants were synthesized by the cyclization of 1-(2-hydroxyethyl)-2-undecyl-2-imidazoline [I] with acrylic acid ethyl ester. Compound [I] was easily hydrolyzed with water, especially in the presence of a alkali, to afford amidoamines. After [I] was hydrolyzed, the reaction mixture was allowed to react with acrylic acid ethyl ester and then soapoinfied. Only sodium salts of N- -(2-carboxyethyl)-N'-(2-hydroxyethyl)aminoethyl]dodecanoyl amide[III] was obtained. However, when the reacton of [I] with acrylic acid ethyl ester was carried out in the presence of water, followed by soapnification, ring cleavage of [I] occurred at 2, 3 position, different from hydrolysis of [I] where the cleavage occurred at 1, 2 position, to give sodium salts of N-[N'-(2-carboxyethyl)aminoethyl]-N-(2-hydroxyethyl)dodecanoyl amide [IV] and N-[N', N'-bis(2-carboxyethyl)aminoethyl]-N(2-hydroxyethyl)dodecanoyl amide [V] as main products.

Intermediates, 1-benzyl-2-substituted-3-carboxaldehyde[I]-[II], were prepared by the reaction of 2-substituted indole-3-carboxaldehyde with benzyl chloride. Indolylacrylophenone derivatives[III]-[X] were prepared from 1-benzyl-2-substituted-3-carboxaldehyde with acetophenone derivatives. They are as follows; 3-(1'-benzylindole-3'-yl)-1acrylophenone [III] 3-(1'-benzylindole-3-yl)-1(p-methoxy)acrylophenone [IV] 3-(1'-benzylindole-3-yl)-1(p-bromo)acrylophenone [V] 3-(1'-benzylindole-3-yl)-1(p-chloro)acrylophenone [VI] 3-(1'-benzyl-2'-methylindole-3'-yl)-1-acrylophenone [VII] 3-(1'-benzyl-2'-methylindole-3'-yl)-1-(p-methoxy)acrylophenone [VIII] 3-(1'-benzyl-2'-methylindole-3'-yl)-1-(p-bromo)acrylophenone [VIII] 3-(1'-benzyl-2'-methylindole-3'-yl)-1-(p-chloro)acrylophenone [X]

A stability to the spreading solvent, which is acetonitrile, benzene, chloroform and acetonitrile-benzene(1:1, v/v) of (3-Alkyl benzimidazdium)-TCNQ(1:2) complex was investigated by UV-visible spectrometer and was confirmed stabilized on acetonitrile, acetonitrile-benzene (1:1, v/v) for five hours. Using Ultra pure water as subphase for Langmuir-Blodgett(LB) films, it was achived successively to fabricate the Y-type LB films of (3-Alkyl benzimidazolium)-TCNQ(1:2) complex. For the identification of (3-Alkyl benzimidazolium)-TCNQ(1:2) complex, UV-visible spectra was recorded on HP 8452A spectrometer.

A Stability to spreading solvent, which is acetonitrile, dichloromethane, benzene, chloroform, and acetonitrile-benzene (1:1, v/v) of (N-docosyl quinolinium)-TCNQ(1:2) complex was investigated by UV-visible spectrometer and was confirmed stabilized on acetonitrile, dichloromethane, and acetonitrile-benzene(1:1, v/v) for 7 hours. Using buffer solution(ph≑6.0) as subphase for Langmuir-Blodgett(LB) film, it was achieved successively to fabricate the Y type LB films of (N-docosyl quinolinium)-TCNQ(1:2) complex. For the identification of deposition of (N-docosyl quinolinium)-TCNQ(1:2) complex, UV-visible spectra was recorded on HP 8452A spectrometer.

Ultra thin organic films, (3-docosyl benzimidazolium)-TCNQ(1:1)complex, were deposited onto ordinary microscope slide glass substrates with a Langmuir-Blodgett technique. II-A isotherms were studied to find optimum conditions of deposition by varying temperature. Anisotropic de electrical conductivities were measured at room temperature. They are about 5.21×10-12S/cm along the direction of film surface, and (2.73~4.40)×10-16S/cm in the vertical direction.

The metal complexes containing amino acidic ligands were prepared by using 11 kinds of amino acids as ligands and Ni, Cu, Co, Zn, Fe as a central metal. The starting was continued for 4hrs at room temperature. But Bis(D,L-Serine)Ni (II), and (D,L-Serine)Co (II) were prepared by heating method(80℃). In order to investigated reaction activity of Bis(D,L-Aspartato) Metal(II), stirring time was varied and Bis(D,L-Tyrosine ) Metal(II) used different divalent metal salts. We anticipate getting a great value from these prepared complexes as a monomer and a catalyst of polymerization which has peculier characteristics.

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160℃ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.

Vibrio vulnificus에서 lipopolysaccharide(LPS)를 추출하여 지방산 조성을 분석한 후 이 결과를 Escherichia coli LPS와 Salmonella typhimurium LPS의 것들과 비교하였다. Vibrio vulnificus LPS의 주 지방산은 myristic acid(C14:0, 41.37%)이었고 Escherichia coli LPS는 lauric acid(C12:0, 37.03%), Salmonella typhimurium LPS는 capric acid(C10:0, 48.60%)로 서로 달랐으나 이 세가지 지방산이 각 LPS의 주성분이었다(70%이상).