Dual frequency acoustic pinger(AP) was manufactured to reduce study effect by long-term use of developed single frequency AP to prevent cetacean bycatch. Directivity characteristic of transducer was the omnidirectional pattern which showed less than ±3dB the change range of sensitivity on the beam pattern of right and left. Source power level(SPL) was 1384311pa with epoxy window before casing however after casing 1170B11Pa at sea. Dual frequency Af was tested to identify the avoidance behavior of bottlenose dolphin by its working. However the efficiency of dual frequency AP about the study effect was verified experiment repeatedly using single and dual frequency AP.

As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time (Ht3) and angle between axises of drum centers (Ag) Ht3 : (7.15Hs-0.81) Ag-0.81, when drum was 5 step there was following formula.Ht5 : (6.45Hs-0.75) Ag0.10, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was T=0.08A83-1.60Ag3-0.49Ag+369.56(r=0.99), when drum was 5 step, tension was, T=-0.01Ag3+1.96Ag2-34.05Ag+414.58 (r-0.99), here, T was tension(g).

This study was conducted to survey the catches of vertical bottom longline fisheries in the sea mount of central northern Pacific(30˚-42˚N, 170˚-175˚E), during the period of July 1 to August 25,2004 by commercial fishing vessel. The number of 57 test fishing was carried out in the central northern Pacific during 43 days and the total catches were 21,092.4kg as 19 fish species, CPUE/day and catches/day were 185 baskets and 490.5kg, respectively. Main fish species caught from the experimental fishing were Squalus mitsukurii (66.3%), Coelorhyrchus asperocephaius (11.7%) and Helicolenus avius (9.8%) and, average inside diameter for fish mouth was 4.0cm over. Catch ratio according to each fishing ground was the order of F, D, J, B and C. Catch ratio fur water depth was the order of 450-500m, 350-400m, 300-350m, 400-450m, 1000-1100m and 500-550m and, main species by water depth was Squalus mitsukurii for 300-400m, Etmopterus lucifer for 300-550m, Coelorhyrchus asperocephaius far 1,000m over. Catch ratio according to the kind of hooks was higher at the hook no.6 for Squalus mitsukurii and no. 5 for Etmopterus lucifer and, catch ratio by baits was higher at squid for Squalus mitsukurii, saury and eel for Helicolemus avius and saury for Etmopterus lucifer. Accordingly, it is thought that the extension of fishing hours is needed with the reduction of damage and loss for fishing gears during fishing operation.

This study was conducted in order to the experiment of bottom trawl fisheries in the sea mount of central northern pacific(30˚-40˚N, 170˚-175˚E), during the period of July 1 to August 25, 2004 by commercial trawl ship. Fishing experiment was carried out by bottom trawl, with the codend of 110mm mesh size. The number of 101 test fishing was done in the sea mount of central northern pacific during 56 days and the total catches were 198,593kg as 18 fish species, and CPUE/day and catches/day were 8.3 hours towing time and 3,546kg. Catch ratio according to each fishing ground was higher with the order of B, C, and E, and catches for B was 7,171.0kg during the towing time of 13.2 hours. Main target species were Pseudopentaceros richardsoni and Beryx splendens, there was 14.9% of damage ratio for fishing gears on catching the target fishes inhabiting on the rough sea bottom. Catches by water depth was the order of 300m below, 301-350m, 451-500m and 351-400m. It is thought that there was no problem on the mesh size because most of fishes caught from the experimental fishing was 30cm over.

Al-Zn alloy/MnO2, seawater cell was considered as a primary aqueous cell with an average voltage range from 1.0 to 1.1V, and the electrolyte of seawater was uptaken into the cell. Eventually, the capacity of its usage will be used for long-term. However, the more use of this cell, the higher corrosion phenomenon of the electrode occurred. Due to its corrosion phenomenon, one main default has been observed with gradual decrease during a discharge process. In this research, a common-used active material for anode was LiNiO2. An active material for cathode, ZnXFeS2 was synthesized in high temperature by uptaken a small amount of 1.3 wt% of ZnS into FeS2, one of the transition-metal dichalcogenides in high temperature. Consequently, based on their usages shown above, this secondary aqueous lithium cell could be more developed. This cell was shown as remarkable charge/discharge performance during the charge/discharge processes. This cathode with active material was given a considerable efficiency of inserting Li+ ions. Moreever, in accordance with the characteristic of the crystal structure for ZnxFeS2, a small amount of ZnS was added which made it possible to reduce prominently velocity of corrosion during the charge/discharge cycle. By applying those merits, Al-Zn alloy/MnO2 seawater cell will be used as a fundamental data in order to transform into a secondary aqueous cell.

The size of the ship's turning circle is influenced by various factors, such as block coefficient, underwater side shape, rudder area ratio, draft, trim and Froude's number. Most of them are already fixed on departure from a port. However, the ship's speed and the rudder angle are controllable factors which operations are able to change optionally during sailing. The DGPS measured the turning circles according to the ship's speed and the rudder angle. The maximum advances by slow and full ahead were 302m and 311m, and the maximum transfers were 460m and 452m, respectively. There occurs almost no difference in size of the turning circle by variation of the ship's speeds. When the rudder angles were changed to 10˚, 20˚ and 30˚, the maximum advances were 447m, 271m and 202m, and then also the maximum transfers 657m, 426m and 285m, respectively. The diameter of the tuning circle was decreased exponentially when the rudder angle was increased. The maneuverability was better when the direction of turning and propulsion of propeller are in the opposite direction rather than in the same one togetherm. The distance of the maximum transfer was always bigger than that of the maximum advance.

This study was conducted in order to improve the automatic fishing operation system for anchovy boat seine by comparison with the fishing gear geometry and efficiency using the labor saving nets and the combined type net with midwater trawl. Field experiments were carried out to observe the geometry of nets and improve the fishing operation system by catcher boats. The vertical net opening of fore wing net, square, fore bag net and after bag net of the combined type net were varied in the range of 9.9~12.9. 16.2~28.2, 6.8~12.1 and 9.5~15.2m respectively, when the towing speed was 1.0m/sec and the distance between boats were 100m, 200m, 300m. The vertical net opening of the combined type nets was gradually decreased as function of with increasing the distance between catcher boats. Labor saving net which was maintained the net opening and towing depth stable was more suitable for the automatic hauling operation system by improvement of bag net rather than the combined type nets which was impossible in swallow depth and near to anchovy school. 3 boats hauling operation system of the labor saving net was carried out by crane with power block in 2 catcher boats for improvement of hauling operation and pushing equipment of anchovy cooking system in the processing boat for maintain more anchovy in dry frame. From the results of field experiments, 3 boats hauling operation system with power block and improved cooking system was very 3 boats hauling operation system with power block and improved cooking system was very useful and more practical as hauling time 20~35min and No. of fishermen 12~13 in comparison with the traditional system such as hauling time 30~50 min and No. of fishmen 28~38.

The aim of our study understands the influence of meteorological factors relating to the formation of the red tide, and monitors the red tide by satellite remote sensing. The meteorological factors have directly influenced on red tide formation. Thus, it was possible to predict and apply to red tide formation from statistical analyses on the realtionships between red tide formation and meteorological factors, and also to realize the near real time monitoring for red tide by satellite remote sensing.

We investigated the characteristics of the thermohaline structure and phytoplankton community from the southwestern areas of Jeju to the nothern areas of Taiwan in the Ease China Sea, in June 2004. According to the analysis of a T-S diagram, three characteristic of water masses were identified. We classified them into the mixed water mass by the Chiness continental coastal waters and Yellow Sea cold water (Region A), Chinese continental coastal waters (Region B) and Taiwan warm current (Region C). Region A was characterized by low temperature, low salinity, high density and high Chl-a concentration. Region B was characterized by high temperature, low salinity, low density and high Chl-a and Region C was characterized high temperature, high salinity, low density and low Chl-a concentration. The phytoplankton community identified a total of 56 species belonging to 31 genera. The dominant species was mainly dinoflagellates, Gymnodinium breve, Scrippsiella trochoidea, Ceratium fusus, Prororcentrum triestinum, centric diatoms, Chaetoceros lorenzianus, Leptocylindrus danicus, Proboscia alata, Skeletonema costatum and pennate diatoms, Pseudonitzschia pungens, Cylidrotheca closterium. Standing crops of phytoplakton fluctuated between 0.1×102 cells/L and 5.7×104 cells/L by dominance of dinoflagellates. In the phytoplankton community, the Region A was characterized by the various species composition in 39 species, the dominint species with di-atomes, Pn. pungen, Ch. lorenzianus and standing crops from 6.9 cells/ml to 56.6 cells/ml, Region B by the various species composition in 37 species, the dominant species with dinoflagellates, G.breve, S. trochoidea and standing crops from 4.6 cells/ml to 26.7 cells/ml, and the Region C by low species number with 28 species, the dominant species with one dinoflagellate, S.trochoidea and one diatom, L.danicus and very low standing crops from 0.1 cells/ml to 5.7 cells/ml. Phytoplankton productivity in the East China Sea was controlled by Chinese continental coastal waters which include a high concentrations of nutrients.

The experiments were conducted to fine out the handling characteristics of the FMT(Frame Mideater Trawl) in the southern waters of Korea using a trawler "DONGBAEK" belongs to Yosu National University. The realtionship between the net depth D(m) and the warp length L(m) at the towing speeds of 2.5k't and 3.5k't werw as follows ; D(m) = 0.30L - 1.3(2.5k't), D(m) = 0.16L - 1.5(3.5k't). Therefore, the net depth was 3.0m deeper when the warp length was 10m longer at the towing speed of 2.5k't and was 1.6m deeper for 10m longer at the speed of 3.5k't, respectively. The sinking speed of FMT was 6.5m/min when the warp releasing speed was 24m/min at the towing speed of 2.5k't and was 3.8m/min for 25m/min at the towing speed of 3.5k't, respectively. The rising speed of FMT was 6.9m/min when the warp rewinding speed was 28m/min at the towing speed of 2.5k't and was 5.3m/min for 25m/min at the towing speed of 3.5k't, respectively. The mean elapsed time getting to the stable towing condition was 104sec at the towing speed of 2.5k't and was 105sec at the towing speed of 3.5k't, respectively, and there was no time difference for the towing speed variation. During the towing, the net depth was comparatively stable on the condition of no change for the warp length and the towing speed.

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between 24.7˚ and 26.2˚, though the maximum lift force was at the angle of attack 22˚.

In order to investigate influence of moon light to the fishing of Pacific saury stick-held dip net fishery in the northwestern Pacific Ocean, casting number, catch and CPUE were analyzed between the full moon and the new moon phases. Based on analyses of data taken from 8 vessels during 1992~2002, casting numbers at the full moon phase and the new moon phase were 110.3 and 121.0 times, respectively, and the first was lower than the latter by 8.8%. Catches of the full moon phase were higher than the new moon phase by 12.5% and CPUE expressed in ton/day and ton/haul were also higher by 31.5%, 26.1% respectively.

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

In order to improve the gill nets for croaker, Miichthys miiuy which is proper to the fishermen's income ans fisheries resource management, we had studied to the net height of present gill nets (mesh size 160mm, 50 mesh in depth), experimental gill nets-I(mesh size 150mm, 68 mesh in depth) and experimental gill nets-II(mesh size 142mm, 75 mesh in depth) in wter using the gill nets design ans analysis simulation system, and then investigated and analyzed the catch efficiency of each gill nets through the field fishing experiments. The net height of emperimental gill nets-I and experimental gill nets-II in water were estimated respectively about 1.5 times and 1.3 times higher than present gill nets which the net height is about 3.5m as the results of simulation considering the current of fishing fields. Total number of croakers which were caught by the persent gill nets was 62(body length 300~1,200mm), total catch weight was 398.7kg (mean 0.6kg/sheet). Total number of croakers which were caught by the experimental gill nets- I was 68(body length 600~1,100mm), total catch weight was 391.6kg (mean 1.2kg/sheet). Total number of croakers which were caught by the experimental gill nets-II was 28(body length 400~900mm), total catch weight was 99.2kg (mean 0.3kg/sheet).

The existing fisheries managers ignored the fishery environment changes, have built competitively vessels of efficiency superiority with related corporations, and have captured indisciminately fisheries resourecs. The economical engine horsepower selection model for fishing vessels shorter than 24m is developed. Also, the economical engine horsepower selection model system is verified by the existing vessels, and the optimum vessel scale and engine horsepower classified by the type of fishery and scale are proposed.

The main goal of this work is to study the effects of temperature and volume fraction of fiber on the Charpy impact test with GF/PP composites. The critical fracture energy and failure mechanisms of GF/PP composites are investigated in the temperature range of 60℃ to -50℃ by impact test. The critical fracture energy increased as the fiber volume fraction ratio increased. The critical fracture energy shows a maximum at ambient temperature and it tends to decreases as temperature goes up or goes down. Major failure mechanisms can be classified such as fiber matrix debonding, fiber pull-out and/or delamination and matrix deformation.

연근해 어선에서 사용되는 저가이면서 고정도의 GPS 컴퍼스는 위성 신호의 차단 및 선박이 고속 선회시 선수방위의 산출이 불안정해지는 문제점을 지니고 있어 전자자기 컴퍼스를 이용하여 안정된 선수방위 검출이 가능하도록 고안한 하이브리드 GPS-전자자기 컴퍼스를 시작(試作)하여, 그 성능을 평가하고 고찰한 결과는 다음과 같다. 스텝모터를 이용한 선회각속도별 실험에서 GPS 컴퍼스는 선회각속도 25˚/sec 이하에서는 1회/sec 씩 0.1˚ 단위로 안정된 선수방위를 검출하였으나, 그 이상의 선회각속도에서는 선수방위를 검출하지 못하였다. 한편, 전자자기 컴퍼스는 선회각속도에 상관없이 항상 선수방위를 나타내었으나, 컴퍼스 오차를 내포하고 있어 GPS 컴퍼스에 비해 정밀도는 낮음을 알 수 있었다. 고정점과 차량으로 이동 중에 하이브리드 GPS-전자자기 컴퍼스의 선수방위 정보를 출력한 결과, GPS 컴퍼스가 정상적으로 작동한 경우에는 GPS 컴퍼스의 선수방위 정보가 출력되고, 그렇지 못할 경우에는 선수방위 정보가 출력되고, 그렇지 못할 경우에는 전자자기 컴퍼스의 선수방위에 컴퍼스 오차를 가감하여 출력됨으로써 선수방위가 안정적으로 제공되었다. 또한, GPS 컴퍼스와 전자자기 컴퍼스에 의한 선수방위의 유사성을 검증하기 위하여, 두 데이터의 이동거리에 대한 선수방위를 이용하여 공분산분석을 행한 결과, 두 컴퍼스의 선수방위는 95%의 신뢰수준으로 유사성이 검증되었다.

In spite of many efforts, in the design of high speed fishing vessel the sea-keeping performance improvement without neglection of resistance-propulsion performance by hull form itself has its limitations. In this paper, the development of sea-keeping improving appendage pitching and trim improver for high speed planing hull on behalf of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test and also has been proved the better resistance performance in the model test and full scale test.

어군탐지기, 계량어군탐지기, 바이오텔레메터리등 음향을 이용하여 해중의 어군의 정보를 탐색하는 수산음향계측장치의 탐지범위와 그 음향특성에 대해 검토, 분석할 결과를 요약하면 다음과 같다. 1. 탐지범위는 송 · 수파기 직경, 송파음의 강도의 증가와 함께 저주파로 이동하여 어군탐지기의 경우 20~50kHz, 바이오텔레메터리의 경우 40~80kHz에서 최대치를 나타내었다. 2. 탐지거리는 주파수의 증가와 함께 증가하였지만, 고주파에서는 흡수계수의 영향으로 급격하게 감소하였다. 즉, 송 · 수파기 직경, 송파음의 강도, TS의 증가 효과는 저주파에서는 크고 고주파에서는 적은 경향을 나타내었다. 3. 바이오텔레메터리에서는 어군탐지기와 같은 송파의 지향성 이득을 얻을 수 없기 때문에 탐지체적의 최대치가 수파기의 직경과 함께 미소하게 감소하였다. 4. 탐지범위는 주파수 특성에 의한 어군탐지기의 음향산란신호를 분석하건, 수산음향계측장치의 설계 및 성능평가에 유효하게 사용될 수 있다.

통영 및 장승포 지역에 설치된 인공어초의 침하특성을 조사하기 위해서 중력시추기를 이용한 해저 퇴적물 채취와 탄성파 탐사기 및 측면 주사 음향 탐지기를 이용한 인공어초의 상태를 조사하였다. 퇴적물 시료는 실험실에서 입도 및 전단강도에 대한 측정이 이루어 졌고 탄성파 자료는 음향 특성에 따라 그 특징을 해석하였다. 탄성파 자료를 분석한 결과 연구지역에 광범위하게 분포하고 있는 퇴적층에 인공어초가 어느 정도 침하되어 있음을 알 수 있었다. 또한 측면 주사 음향 탐지기의 영상을 분석한 결과 대부분의 인공어초들은 군집 혹은 서로 중첩되어 분포하고 있는 것으로 나타나서 음향자료를 이용한 인공어초의 상태를 전반적으로 파악할 수 있었다. 획득된 주상시료 분석 결과 평균 입도 5~9Φ이며, 전단강도는 1~5kPa를 보였다. 평균 입도의 경우 정점별로 수직적인 값의 변화는 작은 반면, 전단강도 값은 평균 입도에 비해 깊이가 깊어질수록 증가하는 양상을 보였다. 특히, 전단강도 값은 퇴적층 깊이 약 20~40cm에서 갑자기 증가하는데 이것은 조사 지역에서 실시한 잠수조사 결과를 바탕으로 인공어초의 침하깊이 20~30cm와 거의 일치하는 것으로 나타났다. 따라서 조사 지역의 경우 전단강도 값이 약 2~3kPa 이상을 가지는 곳에서는 침하 현상이 거의 일어나지 않거나 아주 느리게 일어나고 있는 것으로 사료된다. 본 조사 지역과 같이 니질의 함량이 높고 입도가 유사한 경우에도 퇴적 과정 혹은 퇴적물 특성의 차이나 퇴적 후의 속성 작용에 의한 전단강도 값의 증가를 기대할 수 있으며, 또한 인공어초의 종류와 크기, 무게, 형태 등에 따른 해저면의 침하 특성도 다를 수 있기 때문에 향후 보다 종합적인 요인에 대한 분석이 이루어진다면 연약 지반 해역에 대한 인공어초의 시설 대상 범위는 지금보다 더 확대될 것으로 판단된다.