This study presents a rapid and sequential radiochemical separation method for Pu and Am isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin and TRU resin. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the sample was allowed to evaporate to dryness after filtering the leaching solution with 0.45 micron filter. The Pu isotopes were separated in HNO3 medium with anion exchange resin. For leaching solution passed through anion exchange column, the Am isotopes were separated with TRU resin. The purified Pu and Am isotopes were measured by alpha spectrometer, respectively, after micro-precipitation of neodymium. The sequential radiochemical separation of Pu and Am isotopes in radioactive waste samples using anion exchange resin and TRU resin was validated with ICP-MS system.

Heavy water (deuterium oxide, D2O) is water in which hydrogen atoms (1H, H), one of the constituent elements of water molecules, have been replaced with deuterium (2H, D), a heavier isotope. Heavy water is used in a variety of industries, including semiconductors, nuclear magnetic resonance, infrared spectroscopy, neutron deceleration, neutrino detection, metabolic rate studies, neutron capture therapy, and the production of radioactive materials such as plutonium and tritium. In particular, heavy water is used as a neutron moderator or coolant in nuclear reactors and as a fuel for nuclear fusion energy, methods for measuring heavy water are becoming increasingly important. There are methods with density, mass spectrometry, and infrared (IR) spectroscopy. In this study, Fourier transform infrared spectroscopy (FT-IR) was used, which is commonly used in IR spectroscopy because of its relatively high analytical sensitivity, low operating costs, and easy online analysis. Heavy water was identified in the range of 2,300-2,600 cm-1 wavenumber (O-D) and the range of 1,200-1,300 cm-1 wavenumber (D-O-D), which are known to be the range with strong infrared absorption. As a result, the linearity of infrared absorbance for each heavy water concentration was confirmed within the relative expansion uncertainty (k=2).

In this study, we introduce the validation of the analysis guidelines through preliminary experiments of the draft analysis guidelines before analyzing waste materials (non-combustible). This validation data was applied the accuracy and efficiency of the separation and analysis for the waste such as steel generated from NPP. Steel (non-flammable) was leached the mixed acid and the leaching solution was separated by using the separation guidelines. Steel was corroded with radioactive RM (Co-60, Cs-137) and mixed acid. After drying, the corroded steel was measured the initial radioactivity by a HPGe detector (10,000 seconds). The sample was inserted in a beaker and leached with mixed acid (10 M HNO3 + 4 M HCl) for 2 hours. In this solution, it added 2 ml of H2O2 to increase the leaching effect. The ultrasonic device was adjusted so that the temperature does not exceed 60°C. After elution, the surface of the sample was washed with pure water. The weight of the sample was measured accurately, and recorded the weight loss rate after infiltration. The leaching sample was measured radioactivity by a HPGe detector (10,000 seconds). It was calculated the recovery rate based on the difference in total radioactivity before and after leaching. Before the test, radioactive RM (Co-60, Cs-137) was radioactive deposited by corrosion, but Cs- 137 was not detected in the initial gamma measurement and only Co-60 nuclides were deposited. The recovery rate test results were confirmed to be about 100%.