Background: Floor sit-to-stand (FSTS) places a higher load on the knees than chair sit-to-stand (CSTS). It is difficult to experimentally measure the maximum knee joint force during sit-to-stand motion. Objectives: This study's objectives were twofold: firstly, to quantify the differences in knee joint force between FSTS and CSTS, and secondly, to identify the angles at which the maximum knee joint force occurs during these motions. Design: Computer simulation study. Method: This study was conducted on 4 adult male subjects in their 20s. The FSTS and CSTS motion trajectories of the subjects were acquired using 3- dimensional motion analysis equipment. Using these, the human body mass model of the program was modified according to the subject, and the knee joint force was calculated. Also, the knee angle at which the maximum knee joint force occurs was found. Results: When the subjects performed the FSTS motion, a knee joint force that was up to about 160% higher than that of the CSTS motion occurred, and the angle at which the maximum knee joint force occurred was different between the sitting sequence(FSTS motion: 56~58 degree, CSTS motion: 78~82 degree) and the standing sequence(FSTS motion: 98~100 degree, CSTS motion: 70~74 degree). Conclusion: By comparing FSTS motion with CSTS motion, it is expected that it can be used as a quantitative guide for the effect of motion similar to FSTS motion on the knee when prescribing exercise for the elderly or patients with knee-related lesions.

This study examined the efficacy of various chlorinating agents in partitioning light water reactor spent fuel, with the aim of optimizing the chlorination process. Through thermodynamic equilibrium calculations, we assessed the outcomes of employing MgCl2, NH4Cl, and Cl2 as chlorinating agents. A comparison was drawn between using a single agent and a sequential approach involving all three agents (MgCl2, NH4Cl, and Cl2). Following heat treatment, the utilization of MgCl2 as the sole chlorinating agent resulted in a moderate separation. Specifically, this method yielded a solid separation with 96.9% mass retention, 31.7% radioactivity, and 44.2% decay heat, relative to the initial spent fuel. In contrast, the sequential application of the chlorinating agents following heat treatment led to a final solid separation characterized by 93.1% mass retention, 5.1% radioactivity, and 15.4% decay heat, relative to the original spent fuel. The findings underscore the potential effectiveness of a sequential chlorination strategy for partitioning spent fuel. This approach holds promise as a standalone technique or as a complementary process alongside other partitioning processes such as pyroprocessing. Overall, our findings contribute to the advancement of spent fuel management strategies.

The thermal integrity of spent nuclear fuels has to be maintained during their long-term dry storage. The detailed temperature distributions of spent fuel assemblies are essential for evaluating the integrity of their dry storage systems. In this study, a subchannel analysis model was developed for a canister of a single fuel assembly using the COBRA-SFS code. The thermal parameters affecting the peak cladding temperature (PCT) of the spent fuel assembly were identified, and sensitivity analyses were performed based on these parameters. The subchannel analysis results indicated the presence of a recirculation flow, based on natural convection, between the fuel assembly and downcomer region. The sensitivity analysis of the thermal parameters indicated that the PCT was affected by the emissivity of the fuel cladding and basket, convective heat transfer coefficient, and thermal conductivity of the fluid. However, the effects of the wall friction factor of the canister, form loss coefficient of the grid spacers, and thermal conductivities of the solid materials, on the PCT were predominantly ignored.

Land monitoring involves systematically understanding changes in land use, leveraging spatial information such as satellite imagery and aerial photographs. Recently, the integration of deep learning technologies, notably object detection and semantic segmentation, into land monitoring has spurred active research. This study developed a web service to facilitate such integrations, allowing users to analyze aerial and drone images using CNN models. The web service architecture comprises AI, WEB/WAS, and DB servers and employs three primary deep learning models: DeepLab V3, YOLO, and Rotated Mask R-CNN. Specifically, YOLO offers rapid detection capabilities, Rotated Mask R-CNN excels in detecting rotated objects, while DeepLab V3 provides pixel-wise image classification. The performance of these models fluctuates depending on the quantity and quality of the training data. Anticipated to be integrated into the LX Corporation's operational network and the Land-XI system, this service is expected to enhance the accuracy and efficiency of land monitoring.

Silene fissipetala Turcz., which is native to Continental China and Taiwan, was newly found in Chungcheongnam-do, Korea. S. fissipetala is similar to the related taxa S. antirrhina L., S. armeria L., and S. koreana Kom. in that it has glutinous zones. However, S. fissipetala is distinguished from the congeneric species by the presence of laciniate at the petals. The species grows on slopes and roadsides, suggesting that it is likely to have been introduced through the installation of green sites and road construction. A precise description, photographs, voucher specimens and a key to related taxa are provided.

It is widely known that forage corn is one of the most important crops in the production of silage and green chops during the summer months. In this study, the characteristics and the productivity of Kwangpyeongok, AGR 41, and Nero IT corn cultivars were evaluated in the regions of Jeju and Cheonan, Korea between 2021 and 2022. In each year, different corn cultivars were sown in different parts of the country on April 7 in Jeju and May 3 in Cheonan. The yield of three cultivars, Kwangpyeongok, AGR 41, and Nero IT were measured at the yellow-ripening stage, including the leaves and stems (Stover) and corn grain. Kwangpyeongok stover and total dry matter (DM) yields were slightly higher in Cheonan than in Jeju over the past two years. The quantity of corn cultivated in all cultivated areas was similar. The average yield of AGR 41, corn quantity and total DM were slightly higher in Jeju than in Cheonan. In terms of stover yield, and total dry matter content of the Nero IT cultivar cultivated in Jeju had a slightly higher yield than the cultivar cultivated in Cheonan. Based on this study, all cultivars can show some variations but not too much in terms of growth productivity and distinct characteristics depending on their location. Overall, AGR 41, and Nero IT cultivars in Jeju exhibit slightly higher levels of productivity than the same cultivars in Cheonan.

Background: The grading of Hanwoo (Korean native cattle) is based on four economic traits, and efforts have been continuously made to improve the genetic traits associated with these traits. There is a technology to predict the expected grade based on the 4 economic genetic SNP characteristics of Korean cattle calves using single nucleotide polymorphism (SNP) technology. Selection of highly proliferative, self-renewing, and differentiating satellite cells from cattle is a key technology in the cultured meat industry. Methods: We selected the Hanwoo with high and low-scored of genomic estimated breeding value (GEBV) by using the Hanwoo 50K SNP bead chip. We then isolated the bovine satellite cells from the chuck mass. We then conducted comparative analyses of cell proliferation, immunocytochemistry, qRT-PCR at short- and long-term culture. We also analyzed the differentiation capability at short term culture. Results: Our result showed that the proliferation was significantly high at High scored GEBV (Hs-GEBV) compared to Low scored GEBV (Ls-GEBV) at short- and long-term culture. The expression levels of Pax3 were significantly higher in Hs-GEBV bovine satellite cells at long-term culture. However, there were no significant differences in the expression levels of Pax7 between Hs- and Ls-GEBV bovine satellite cells at short- and long- term culture. The expression levels of MyoG and MyHC were significantly high at Ls-GEBV bovine satellite cells. Conclusions: Our results indicated that selection of bovine satellite cells by Hanwoo 50K SNP bead chip could be effective selection methods for massive producing of satellite cells.

Degenerative arthritis is a common joint disease that affects many elderly people and is typically diagnosed through radiography. However, the need for remote diagnosis is increasing because knee pain and walking disorders caused by degenerative arthritis make face-to-face treatment difficult. This study collects three-dimensional joint coordinates in real time using Azure Kinect DK and calculates 6 gait features through visualization and one-way ANOVA verification. The random forest classifier, trained with these characteristics, classified degenerative arthritis with an accuracy of 97.52%, and the model's basis for classification was identified through classification algorithm by features. Overall, this study not only compensated for the shortcomings of existing diagnostic methods, but also constructed a high-accuracy prediction model using statistically verified gait features and provided detailed prediction results.

Background: Copy number variation (CNV) can be identified using next-generation sequencing and microarray technologies, the research on the analysis of its association with meat traits in livestock breeding has significantly increased in recent years. Hanwoo is an inherent species raised in the Republic of Korea. It is now considered one of the most economically important species and a major food source mainly used for meat (Hanwoo beef). Methods: In this study, CNVs and the relationship between the obtained CNV regions (CNVRs) can be identified in the Hanwoo steer samples (n = 473) using Illumina Hanwoo SNP 50K bead chip and bioinformatic tools, which were used to locate the required data and meat traits were investigated. The PennCNV software was used for the identification of CNVs, followed by the use of the CNV Ruler software for locating the different CNVRs. Furthermore, bioinformatics analysis was performed. Results: We found a total of 2,575 autosomal CNVs (933 losses, 1,642 gains) and 416 CNVRs (289 gains, 111 losses, and 16 mixed), which were established with ranged in size from 2,183 bp to 983,333 bp and 10,004 bp to 381,836 bp, respectively. Upon analyzing the restriction of minor alleles frequency > 0.05 for meat traits association, 6 CNVRs in the carcass weight, 2 CNVRs in the marbling score, 3 CNVRs in the backfat thickness, and 2 CNVRs in the longissimus muscle area were related to the meat traits. In addition, we identified an overlap of 347 CNVRs. Moreover, 3 CNVRs were determined to have a gene that affects meat quality. Conclusions: Our results confirmed the relationship between Hanwoo CNVR and meat traits, and the possibility of overlapping candidate genes, annotations, and quantitative trait loci that results depended on to contribute to the greater understanding of CNVs in Hanwoo and its role in genetic variation among cattle livestock.

Tulsi (Ocimum sanctum), commonly known as Holy Basil is a revered herb with a rich history in traditional medicine systems, particularly in Southeast Asia. For its medicinal properties, Tulsi has been regarded as an “Elixir of Life” and has been used to treat various ailments. However, the comprehensive investigation of Tulsi extracts and their potential pharmacological benefits, specifically in relation to antioxidant activity remains limited. Hence, the objective of this study was to evaluate the antioxidant activity of Tulsi leaf and stem extract using various screening methods. We investigate the antioxidant activity exhibited by the extract using three different methods involved the utilization of the total polyphenol content assay, the ferric reducing power assay and 2, 2-diphenyl-1-14 picrylhydrazyl (DPPH) assays. The results revealed that the Tulsi leaf extract (TLE) exhibited significantly higher antioxidant activity when compared to the Tulsi stem extract (TSE) in all the performed assays. The higher content of phenolics in TLE may have contributed to its superior antioxidant activity. The HPLC (high performance liquid chromatography) analysis of TLE revealed the presence of eugenol, active compound for several therapeutic properties. These findings provide an understanding of the bioactive compounds present in Tulsi extracts and their potential antioxidant benefits.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

This study was conducted to assess the genetic variability and correlation of phenotypic characteristics in 12 tomato (Solanum lycopersicum L.) genotypes including 11 WorldVeg and one commercial variety (Pusa Ruby) in Terai (plain) region of Nepal in 2021–2022. This experiment was laid out in a randomized complete block design with three replications. The phenotypic traits, including days to 50% flowering, plant vigor and height, fruit number/plant, fruit yield, fruit weight and diameter, fruit firmness and fruit pericarp thickness, and total soluble solids (TSS) content of the fruits, were studied. Analysis of variance revealed significant differences among the genotypes for all the traits except for plant vigor. The genotype of AVTO1705 resulted the highest fruit yield (2.9 kg/plant) than Pusa Ruby, a commercial check (0.5 kg/plant). The phenotypic coefficient of variation (PCV) was higher than the genotypic coefficient of variation (GCV) for all the traits and PCV values were maximum for the number of fruits, fruit yield, and fruit weight. High PCV, GCV, and genetic advance (GA) were observed for yield, fruit weight, and plant height, respectively, indicating the additive gene effect. High heritability for fruit yield/plant and plant height inferred the phenotypic selection for their genetic improvement. Fruit yield was significantly (P<0.05) positively correlated with the fruit number and fruit weight, and direct selection of these traits are reliable for yield improvement in tomato.

Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

Mucosa-associated lymphoid tissue (MALT) lymphoma (ML) is a type of non-Hodgkin’s lymphoma involving MALT, commonly the stomach or salivary glands, although virtually any mucosal site can be affected. ML originates from B cells in the marginal zone of MALT, and is also called extranodal marginal zone B cell lymphoma. It is a slow-growing cancer that usually responds well to treatment. A 59-year-old female presented with a 1-day history of quadriparesis and dysarthria. Up arrival at the hospital, motor power in the right upper and lower extremities was grade 3/5 according to the Medical Research Council scale, while that in the left leg was 4/5. The patient had been diagnosed with gastric ML 1 year prior, and had received antibiotics during the previous 2 weeks. The emergency magnetic resonance imaging of the brain performed at the time of presentation showed multifocal embolic infarction in the cerebral hemisphere bilaterally, which did not have a cardiac origin. Magnetic resonance angiography revealed no stenotic or occlusive lesions. Secondary prophylaxis with daily administration of 300 mg aspirin was prescribed. The patient was discharged with residual right hemiparesis 2 weeks after the onset of symptoms. Herein, we present a rare case of multifocal cerebral infarction in a gastric ML patient.

Collagen peptides have garnered significant attention as functional foods across multiple fields due to their capacity to regulate physiological and hormonal processes, offering numerous advantages. However, despite their broad range of applications, comprehensive research on the potential toxicity of these substances remains lacking. Therefore, this study sought to assess the acute oral toxicity of a collagen peptide derived from skate (Raja kenojei) skin (CPSS) in both rats and dogs. In the rat model, CPSS was orally administered at doses of 300 and 2,000 mg/kg to Sprague-Dawley rats. An escalating single-dose oral toxicity assessment at doses of 500, 1,000, and 2,000 mg/kg was carried out in beagle dogs with 3-day intervals between doses. Throughout the 14-day post-administration assessment period, clinical signs, mortality rates, changes in body weight, and necropsy observations were closely monitored. After oral administration, no signs of toxicity associated with CPSS were observed in either rats or dogs. Therefore, the oral LD50 (approximate lethal dose for 50% mortality) for CPSS in rats was determined to exceed 5,000 mg/kg, and the maximum tolerated dose for dogs was estimated to be above 2,000 mg/kg. Consequently, this study offers safety data on the use of CPSS in functional foods and medicinal applications.

Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.