Herein, a new and generic strategy has been proposed to introduce uniformly distributed graphitic carbon into the nanostructured metal oxide. A facile and generic synthetic protocol has been proposed to introduce uniformly distributed conducting graphitic carbon into the Co3O4 nanoparticles ( Co3O4 NPs@graphitic carbon). The prepared Co3O4 NPs@graphitic carbon has been drop casted onto the portable screen-printed electrode (SPE) to realize its potential application in the individual and simultaneous quantification of toxic Pb(II) and Cd(II) ions present in aqueous solution. The proposed Co3O4 NPs@graphitic carbon-based electrochemical sensor exhibits a wide linear range from 0 to 120 ppb with limit of detection of 3.2 and 3.5 ppb towards the simultaneous detection of Pb(II) and Cd(II), which falls well below threshold limit prescribed by WHO.

Activated non-graphitizable hard carbon using orange peel with mesoporous structure has been prepared by pyrolyzation at 700, 800, 900 °C using chemical activation method. The activated orange peel-derived hard carbon has been characterized for its mesoporous and disordered structure. TG-DSC gives the information for the changes about sample composition and thermal stability of the materials. Increasing the carbonization temperature for orange peel precursor using NaOH as activating agent, elevates the pore diameter, which thereby facilitating the insertion of Na+. Raman and X-ray diffraction confirms the presence of disordered carbon. The surface morphology of the material was analyzed by scanning eletron microsope and nitrogen ( N2) adsorption and desorption analysis give the morphology, mesopore size (3.374, 3.39 and 4 nm) and surace area (60.164, 58.99 and 54.327 m2/g) of the orange peel-derived hard carbon. Hence, this work strongly evidences that the biomass-derived hard carbon with good porosity and paves way of superior electrochemical performance for emerging sodium ion batteries.

The effect of heat treatment and vacuum conditions on the textural properties and electrochemical performance of commercially available activated carbons (ACs) was investigated. The AC after post-heat treatment was characterized by nitrogen adsorption–desorption, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy measurements. The ACs treated under vacuum conditions exhibit a higher specific surface area and micropore surface area than those treated under nitrogen atmospheric pressure without significantly affecting the graphite structure of the AC. Under 800 °C temperature and vacuum conditions (AC-V800), the AC with the highest Brunauer– Emmett–Teller surface area of 1951.9 m2 g−1 (16.4% improvement relative to that of the original AC (1677.2 m2 g−1)) was obtained. This is attributed to the removal of oxygen-containing functional groups and volatile matters in the carbon by thermal treatment under vacuum conditions. Consequently, the electric double-layer capacitor using ACs treated under vacuum conditions (1 kPa) at 800 °C (AC-V800) shows considerably improved electrochemical performance in terms of higher specific capacitance and better cycling stability at a high working voltage (3.1 V), compared to the nitrogen-treated and commercial ACs.

This work reveals a modified method for the preparation of activated carbon (P-ACA) using low-cost materials (mix natural asphalt: polypropylene waste). The P-ACA was prepared at 600 °C by assisting KOH and HF. The morphological variations and chemical species of the P-ACA were characterized using SEM–EDX and FTIR. The active surface area, density and ash content of the P-ACA were also investigated. Adsorption properties of P-ACA were used for the thermodynamic and kinetic study of 4-((2-hydroxy naphthalenyl) diazenyl) antipyrine (HNDA), which was prepared as a novel azo dye in this work. The optimal conditions (initial concentration, adsorbent dose, contact time and temperature) of the adsorption process were determined. Adsorption isotherms (Freundlich and Langmuir) were applied to the experimental data. These isothermal constants were used to describe the nature of the adsorption system, and the type of interaction between the dye and the P-ACA surface. The results have indicated that the mixture (Natural asphalt-polypropylene waste) is efficient for the synthesis of P-ACA. The synthesized P-ACA demonstrates the presence of pores on the surface with various diameter ranges (from 1.4 to 4.5 μm). Furthermore, P-ACA exhibits an active surface area of 1230 m2 g−1, and shows a high adsorption capacity for HNDA.

There is a growing interest in exploring attribute non-attendance (ANA) in choice experiments. This study applied Random Response Share (RRS) approach for investigating inattention choice in choice experiments and assessed its out-of-sample predictive performance using 60 months of choice experiment data from 61,592 U.S households. Our results suggest that the RRS is not likely to be a dominant strategy to the conventional multinomial logit model in terms of the out-of-sample forecasting accuracy. However, the RRS could be a way to deal with attribute nonattendance when also considering the socio-economic characteristics of respondents.

Preparation of activated carbon from biomass residue with conventional steam activation was conducted to find the alternative raw materials for meeting the high demand for low-cost porous material in the desiccant application. In this study, activated carbons were produced from dead camphor leaves using two-step methods at different preparation temperatures. The characterization results revealed that the prepared activated carbons have a surface area of 700 m2/g, with 75% of microporosity. The water vapor sorption study reported that the water uptake of camphor leaf-based activated carbons was strongly affected by the pore properties of the materials. Moreover, from the water adsorption kinetics, it was observed that the rate constant of adsorption was varied at each relative pressure, which can be assumed that the water adsorption mechanism is different at each relative pressure. From these results, it was revealed that the prepared camphor leaf-based activated carbons have a promising ability to adsorb water vapor from humid air.

We report the comparative study of electronic and optical properties of (6,1) SWCNT from GGA and DFT-1/2 methods. (6,1) SWCNT is a low-bandgap semiconductor, which falls within ( n1 − n2)/3≠ integer. The calculated bandgaps are 0.371 eV and 0.462 eV from GGA and DFT-1/2, respectively. Thus, DFT-1/2 enhanced the electronic bandgap by 24.52%. From both GGA and DFT-1/2 approaches (6,1) SWCNT exhibits an indirect bandgap along Γ − Δ symmetry. However, the percentage change in direct–indirect bandgap is negligibly small, i.e., 4.1% and 3.7% from GGA and DFT-1/2, respectively. The refractive index measured along x-axis ( n x ) approaches unity, indicating transparent behaviour, while that along z-axis ( n z ) goes as high as ∼3.82 for photon energy 0.0 − 0.15 eV, exhibiting opaque behaviour. Again, the value of n z drops below unity at photon energy ∼0.18 eV and again approaches ∼ 1 for higher energy ranges. The optical absorption is highly anisotropic and active within the infrared region.

Even in an era where 8-meter class telescopes are common, small telescopes are considered very valuable research facilities since they are available for rapid follow-up or long term monitoring observations. To maximize the usefulness of small telescopes in Korea, we established the SomangNet, a network of 0.4{1.0 m class optical telescopes operated by Korean institutions, in 2020. Here, we give an overview of the project, describing the current participating telescopes, its scientic scope and operation mode, and the prospects for future activities. SomangNet currently includes 10 telescopes that are located in Australia, USA, and Chile as well as in Korea. The operation of many of these telescopes currently relies on operators, and we plan to upgrade them for remote or robotic operation. The latest SomangNet science projects include monitoring and follow-up observational studies of galaxies, supernovae, active galactic nuclei, symbiotic stars, solar system objects, neutrino/gravitational-wave sources, and exoplanets.

In the current work, we have developed a new composite catalyst for methanol oxidation based on Ni and/or NiO incorporated in activated carbon (AC) derived from agricultural wastes (Rice straw). The new electrocatalysts based on nickel-activated carbon (Ni/AC) and nickel oxide-activated carbon (NiO/AC) composites were prepared by electroless plating technique. Physico-chemical characteristics of the composites such as structure, composition and morphology were studied by X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and particle size analyzer. The electrochemical activity of the prepared composites towards methanol electrooxidation reaction (MOR) has been evaluated under alkaline conditions by cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. Among the examined electrodes, the electrochemical performance of NiO/AC preceded either Ni/ AC or Ni free AC and showed better stability. The dispersion of different forms of Ni in activated carbon in case of NiO/AC electrode is predicted to give rise to the increase in electrocatalytic activity in the potential range under study and makes it more resistant to poisoning by the byproduct of methanol oxidation. The effect of changing methanol concentrations and scan rates on the electrochemical characteristics of the modified electrode was studied and it was found that the diffusion process is controlled by methanol rather than OH− ions.

Abstract Activated carbon from the shell of the cashew of Para (SCP) was produced by chemical activation with ZnCl using the ratio of SCP: ZnCl2 1.0:1.5 at 700 °C. The prepared activated carbon (SCP700) was used for the removal of two emerging contaminants, 4-bromophenol (4-BrPhOH) and 4-chloroaniline (4-ClPhNH2) that are primarily employed in the industry. Different analytical techniques were used to characterize the activated carbon. From the N2 adsorption–desorption isotherms were obtained the specific surface area of 1520 m2 g− 1 and total pore volume of 0.492 cm3 g−1. The functional groups were identified by the FTIR technique and quantified by modified Boehm titration. The results revealed the bearing of several functional groups on the SCP700 surface, which may utterly influence the removal of the emerging contaminants. The equilibrium experiments showed that the maximum uptaken capacities (Qmax) achieved at 45 °C were 488.2 (4-BrPhOH) and 552.5 mg g−1 (4-ClPhNH2). The thermodynamic parameters demonstrated that the processes of 4-BrPhOH and 4-ClPhNH2 adsorption are exothermic, spontaneous, energetically suitable, and the magnitude of ΔH° is compatible with physisorption. The mechanism of the adsorption of the emerging contaminants onto the carbon surface is dominated by microporous filling, hydrogen bonds, π-stacking interactions, and other Van der Waals interactions. The use of activated carbon for the treatment of industrial synthetic wastewater with several inorganic and organic molecules commonly found in industrial effluents showed a very high percentage of uptaking (up to 98.64%).

Background/Aim: Endoscopic retrograde cholangiopancreatography (ERCP) training requires varying degrees of staff assistance regarding operation of the fluoroscopy machine via a foot pedal. Efficiency is important to acquire during this training due to radiation risks. In this study, we evaluate the effect of controlling endoscopy and fluoroscopy unit on duct cannulation rates (CRs) and total fluoroscopy time (FT) for fellows in training. Methods: 204 patients undergoing ERCP were randomized to one of two groups: 1) “Endoscopist Driven” group in which the endoscopist controlled the foot pedal for fluoroscopy, and 2) “Assistant Driven” group in which attending or fellow controlled the foot pedal while the other team member controlled the endoscope. Various measures including selective duct CR and total FT were recorded. Results: There was no significant difference in mean procedure duration between the two groups (32 minutes vs. 33 minutes, p=0.70). There was also no statistically significant difference in CR (83.7% vs. 77.4%, p=0.25) or FT (3.27 minutes vs. 3.54 minutes, p=0.48). Conclusions: ERCP is a technically challenging procedure which requires extensive supervision. This study demonstrates that CR and FT are not affected by who controls the fluoroscopy.

Gravitational lensing of point sources located inside the lens caustic is known to produce four images in a conguration closely related to the source position. We study this relation in the particular case of a sample of quadruply-imaged quasars observed by the Hubble Space Telescope. Strong correlations between the parameters dening the image conguration are revealed. The relation between the image conguration and the source position is studied. Some simple features of the selected data sample are exposed and commented upon. In particular, evidence is found for the selected sample to be biased in favor of large magnication systems. While having no direct impact on practical analyses of specic systems, our results have pedagogical value and deepen our understanding of the mechanism of gravitational lensing.

Objective: The Modified Barthel Index (MBI) measures individuals’ level of independence in performing activities of daily living. The purpose of this study was to examine the internal consistency and construct validity of the MBI for children with rare disorders. Methods: The study participants are children with rare disorders who have muscle weakness including Barth syndrome and congenital muscular dystrophy (N = 113). The MBI was completed by participants in either an online format utilizing the UF Qualtrics system or a pencil-and-paper format. Statistical analysis was conducted to examine the psychometric properties of the MBI. Results: The MBI showed excellent internal consistency for children with Barth syndrome (Cronbach’s α = .91) and congenital muscular dystrophy (Cronbach’s α = .93). Construct validity was supported by a significant difference in MBI scores among participants grouped by diagnoses. MBI score was significantly different between the unaffected group and congenital muscular dystrophy (p < .0001) as well as between the unaffected group and Barth syndrome (p < .0001). Conclusion: The psychometric properties of the MBI present good reliability and construct validity suggesting suitability for use as an outcome measure for children with rare disorders.