지금까지 저점도 메이크업 유중수형 에멀전을 함침재에 침적시켜 휴대 간편성과 사용 편리성을 높인 화 장품이 개발되어 왔다. 종래에는 주로 경도가 높고 다공의 망상구조를 갖는 폴리우레탄 스펀지가 함침재로서 사용되어 왔으며, 이러한 스펀지는 구조적인 특성상 화장료 함침이 잘 되기 때문에 제조가 용이하다는 장점을 가지고 있지만, 초기 토출량이 높고, 사용 횟수에 따라 토출량의 감소가 큰 특징을 가지고 있었다. 본 연구에서는 이러한 문제를 해결할 수 있는 새로운 발포형태의 스펀지를 개발하고 이를 활용한 다양한 특징을 갖는 메이크업 유중수형 에멀전에 관하여 연구하고자 한다. 우선 상기 목적에 맞는 다양한 소재를 조사하고, 이를 토대로 natural rubber (NR)와 styrene butadiene rubber (SBR)의 조합을 통해 성형성이 우수하며 화장료 조성물의 적절한 흡수 및 배출 능력을 가지는 새로운 물질을 개발하였다. 이러한 함침재는 고무와 같은 탄성성질의 부드러 움과 높은 신율 및 균일한 토출력을 가지는 특징을 확인할 수 있었다. 화장료 조성물로 사용되는 여러 종류의 오일의 극성도(polarity)에 따른 신규 스펀지의 특성을 이해하고, 메이크업 유중수형 에멀전의 점성을 조절하여 메이크업 제품 개발이 가능함을 확인하였으며, 향후 새로운 특성을 갖는 화장료 함침재로써의 가치가 매우 높을 것으로 기대된다.

This research proposed MPC (Magnesia Phosphate Composite) mortar as a rapid repair material. But because this rapid reactivity inherently has issues related to microcracking caused by expansion and reaction heat, retarder and fibers are proposed to be used to control the hardening rate and cracking

In this study, it modeled the ground proper to geotechnical site characteristics in Korean urban area, compared geotechnical site characteristics of the selected 158 grounds in Korean urban areas with characteristics of the ground in the western part of the United States and performed earthquake responses to improve the decision method of the design earthquake force. Based on the amplification factor from the analysis results, the response spectra of each ground were developed and analyzed with the design response spectra presented in the seismic design criteria.

Grape cultivar “Campbell Early” account for 70% of table grape in Korea and Leaf Spot Disease caused by Pseudocercospora vitis is one of a major disease in greenhouse and field grown area during late summer season in both of organic and conventional grape farm. Leaf spot disease can cause lowing of sugar content in fruit and vine growth and very difficult to control especially in organic field. Photosynthesis ability and chemical components are compared between leaf spot disease infected leaves with degree of necrotic area. With increase of disease necrotic area, CO2 differential value, water use efficiency and CO2 assimilation and respiration ratio are decreased proportionally and on the other hand, stomatal conductance value is not affected by disease necrotic area. Chlorophyll contents are also decreased by 50% in heavily infected leaves and imply decrease of chlorophyll contents is a major source of photosynthesis ability decline. With increase of disease necrotic area in leaves, total nitrogen and phosphate contents are decreased and on the other side, total carbon, potassium, calcium and magnesium contents are increased. From this research, we can infer that not only chemical control program is important in control of leaf spot disease but also fertilizing program is significant especially in organic agronomical control of fungal disease in grape cultivar “Campbell Early”.

제주용암해수는 미네랄과 영양염류가 풍부한 물로 제주만이 보유한 지하수자원이다. 본 연구의 목적은 제주용암해수의 피부 보습효과를 확인하기 위한 것이다. 피부의 건조함을 막고 수분을 유지하기 위해서는 표피 층의 장벽기능이 정상적으로 기능하고, 표피층 내 수분의 유지와 이동이 원활히 이루어져야 한다. 제주용암해수 를 각질형성세포에 처리한 결과 표피층의 분화과정과 natural moisturizing factor (NMF) 생성과정에 관여하 는 유전자인 필라그린과 caspase-14 유전자의 발현양이 증가되는 것을 확인할 수 있었다. 또한 막관통 단백질 로 수분의 이동을 조절하는 aquaporin 3 (AQP3) 유전자 발현양과 단백질 발현양도 제주용암해수 처리에 의해 증가하였다. 인공피부를 이용한 실험에서 제주용암해수를 배지에 처리하고 배양한 결과 hyaluronic acid (HA) 의 수용체인 CD44의 발현양이 증가하였다. 본 연구를 통해 제주용암해수는 피부 보습과 관련된 인자들의 발현 양을 증가시켜 피부의 보습기능에 도움을 주는 것으로 사료되었다.

‘Jungmo1038', a mid-late maturing, high dry matter yielding rice (Oryza sativa L.) cultivar with glabrous leaf and hull, was developed for whole crop silage (WCS) use. It was derived from a cross between ‘SR24592-HB2319’ with high biomass, smooth leaf and hull and good germinability in low temperature and new plant type (NPT), ‘IR73165-B-6-1-1‘ which had low tillering trait, large panicle, dark green leaf, thick and sturdy stem and vigorous root system. This cultivar had about 125 days growth period from seeding to heading, 99㎝ culm length, 20㎝ panicle length, 13 panicles per hill, 119 spikelets per panicle and 1,000-grain weight of 23.3 g as brown rice in central plain region, Suwon. This hairless WCS rice variety was weak to cold stresses similar to ‘Nokyang’ but was resistant to lodging in the field, strong to viviparous germination and good to low temperature germination. In addition, ‘Jungmo1038’ was resistant to leaf and neck blast but susceptible to bacterial blight, rice stripe virus and brown planthopper. Its average dry matter yield for three years reached 17.2 MT/ha, 21% higher than that of ‘Nokyang’. This glabrous cultivar had 6.6% crude protein and 62.4% total digestible nutrients a little low compared to ‘Nokyang’. In Korea peninsular, 'Jungmo1038' grows well in central and southern plain and is good to harvest between 15 to 30 days after heading to improve its feeding value and digestion rate of livestock(Grant No. 5634).

The rice recombinant inbred lines derived from Milyang23 and Gihobyeo cross were used in genetic mapping and QTL analysis studies. In this study, we developed a new 101 CAPS markers based on the SNPs in the whole genome region between these varieties. As a result, the total genetic distance and average distances were 1,696.97 cM and 3.64 cM, respectively. In comparison to the distance of the previous genetic map constructed based on 365 DNA markers, the new genetic map was found to have a decreased distance. The map was applied for the detection of QTLs on all seven traits relevant to diameter of stem internode, length of culms, length of panicles and the number of panicles including the correlation analysis between each trait. The QTLs results were similar to the report in previous studies, whereas the distance between the markers was narrowed and accuracy increased with the addition of 101 CAPS markers. A total of 9 new QTLs were detected for stem internode traits. Among them, qI1D-6 had higher LOD of 5.1 and phenotype variation of 50.92%. In this experiment, a molecular map was constructed with CAPS markers using next generation sequencing showing high accuracy for markers and QTLs. In the future, developing more accurate QTL information on stem internode diameters with various agriculturally important traits will be possible for further rice breeding.

In order to estimate the influence of chloride de-icing materials which mainly cause the corrosion of steel structures, the salt spray test was conducted and the corrosion level of steel was investigated. The concentration of the chloride de-icing materials and the number of the spray were selected as variables, and the influence of chloride de-icing materials was estimated according to weight reduction of steel specimens.

Recently, systematic management strategy and planning infrastructure is improved the efficiency of infrastructure maintenance are prepared. In this study, a overall rating software tool is developed for SOC facilities to enable rapid analysis results of complex process.

This study was conducted for the development of degradation model for the coated steel member in the atmospheric environment. Field inspection data was assessed against the existing evaluation factors which were proposed by the related research process. A correlation between evaluated degradation score and service life of coated steel member was plotted on the graph, and degradation of the coated steel member could be evaluated by quantitative analysis method.

In this study, finite element analysis was performed to analyze the load carrying capacity of corroded plate girder. Consequently, web buckling load indicated drastic reduction in corrosion thickness less than 1 millimeters. Therefore, if the plate girder is seriously corroded to time of drastic reduction of web buckling load, it will need appropriate maintenance and reinforcement to guarantee of safety.

Recently corrugated steel member filled with concrete has been applied to various construction structures. In this study, the compressive strength was evaluated based on the number of bolt joints of corrugated steel. And compressive strength was also evaluated according to the shape and spacing of the steel rebar to improve the performance of the corrugated plates.

The purpose of this paper is to find an limitation to detect the defect of damaged asphalt pavement structures for improved infrared thermography. We use heat source of a natural light to detect the defect efficiently. The heat source was applied to the asphalt specimens containing maximum depth of 3cm internal timber. It was found that the depth of 3cm internal timber could be detected by this method. In addition, we used the improved image processing to make the damage zone displayed clear in the image obtained from the thermographic operation.

When the concrete is subjected to impact of the projectile, compressive stress wave is transmitted to the rear side. When the compressive stress wave reached the rear side, is was reflected as a tensile wave. And, when the tensile stress in the concrete matrix exceeded the dynamic tensile strength, crack in the concrete was occurred.

Fracture behavior of concrete subjected to dynamic loading is affected by loading rate and strain rate. In this study, compressive strength properties according to strain rate of fiber reinforced concrete by rapid loading with 500ton rapid loading test machine was analyzed.

Authors investigated the fatigue bond performance on the grouted joint connection of wind tower. High strength cementeous grout has 140MPa of a compressive strength was incerted in the gap of small scaled steel tube simulated the wind tower joint. The stress level was 65 and 74% of static strength that is 35MPa, respectevely. From the test, each specimens endured the repeated loads up to 2,000,000 cycles.

For a efficient maintenance it is necessary to inspect SOC infrastructure using the performance-based evaluation method throughout quantitative measurement. In this study durability evaluation factors of steel structural member are proposed in order to develop performance-based evaluation method of SOC infrastructure.

The current domestic SOC facilities focuses on checking stability by a physical evaluation. In this study, the concept for calculating SOC facilities’ Korean representative rating is set up by analyzing international SOC facilities' evaluation methods and objects and factors of evaluation for it. Also, facilities by suggesting design plan based on established concept for calculating each facilities’ rating.

Currently, major SOC structures of Korea are necessary to multilateral inspection as aging very fast. In this study, SOC facilities' status of Korea was investigated and analyzed for calculating Korean representative rating. Also, after evaluation methods for rating of international facilities were researched, they were used as a base data for Korean representative rating.