High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

The decommissioning of nuclear facilities produces various types of radiologically contaminated waste. In addition, dismantlement activities, including cutting, packing, and clean-up at the facility site, result in secondary radioactive waste such as filters, resin, plastic, and clothing. Determining of the radionuclide content of this waste is an important step for the determination of a suitable management strategy including classification and disposal. In this work, we radiochemically characterized the radionuclide activities of filters used during the decommissioning of Korea Research Reactors (KRRs) 1 and 2. The results indicate that the filter samples contained mainly 3H (500–3,600 Bq·g−1), 14C (7.5–29 Bq·g−1), 55Fe (1.1– 7.1 Bq·g−1), 59Ni (0.60–1.0 Bq·g−1), 60Co (0.74–70 Bq·g−1), 63Ni (0.60–94 Bq·g−1), 90Sr (0.25–5.0 Bq·g−1), 137Cs (0.64–8.7 Bq·g−1), and 152Eu (0.19–2.9) Bq·g−1. In addition, the gross alpha radioactivity of the samples was measured to be between 0.32–1.1 Bq·g−1. The radionuclide concentrations were below the concentration limit stated in the low- and intermediatelevel waste acceptance criteria of the Nuclear Safety and Security Commission, and used for the disposal of the KRRs waste drums to a repository site.

Interest in the use of semiconductor-based photocatalyst materials for the degradation of organic pollutants in a liquid phase has grown, due to their excellent performance and response to the light source. Herein, we fabricated a NiO-SiCTiO2 ternary structured photocatalyst which had reduced bandgap energy, with strong activation under UV-light irradiation. The synthesized samples were examined using XRD, SEM, EDX, TEM, DRS, EIS techniques and photocurrent measurement. The results confirmed that the two types of metal oxides were well bonded to the SiC fiber surface. The junction of the new photocatalyst exhibited a large number of photoexcited electrons and holes. The holes tended to oxidize the water and form a hydroxyl radical, which promoted the decomposition of methylene blue. The close contact between the 2D SiC fiber and metal oxide semiconductors expanded the scope of absorption wavelength, and enhanced the usability of the ternary photocatalyst for the degradation of methylene blue. Among three synthesized samples, the NiO-SiC-TiO2 showed the best photocatalytic effect, and was considered to have excellent photoelectron transfer due to the synergy effect between the metal oxide and SiC.

Though many treatment technologies of contaminated water have been developed for a long time, it is still difficult to find a suitable method for large volumes of low radioactivity tritium-contaminated water. For this reason, most of the tritium-contaminated water been discharged to the biosphere or been stored in a special control area as radioactive waste. Activated carbon is a common material, but since there are few data on the treatment of tritium-contaminated water, its adsorption behavior to HTO is worth studied. In our study, for the tritium-contaminated water having a low radioactivity concentration (350-480 Bq/g), adsorption experiments were performed with activated carbon. The effects on the selective adsorption of HTO were investigated for temperature (5-55°C), hydrogen peroxide (1-10wt%) and activated carbon reuse (1-6 times) under non-equilibrium conditions. The treatment of activated carbon significantly reduced the radioactivity of tritium-contaminated water around 60 minutes of adsorption time. In order to clearly analyze the experimental results, positive factors and negative factors on the HTO selectivity were separately evaluated according to the adsorption time. Temperature and the reuse of activated carbon were evaluated as negative factors for HTO selectivity of activated carbon, whereas hydrogen peroxide (> 5wt%) was evaluated as a positive factor. By the evaluation method of separating the influencing factors into two types, the adsorption experimental results of HTO could be understood more clearly.

Minuartia laricina (L.) Mattf. is a Korean native plant with high potential as a commercial flowering potted plant due to its compactness and long flowering duration. However, because this plant is a groundcover, it is susceptible to lodging and leggy growth. Therefore, this study investigated the effects of plant growth retardants (PGRs) on the inhibition of stem elongation and flowering characteristics of M. laricina. Commercial products, Trimmit, Cycocel, and B-Nine, were used for the exogenous PGR application of paclobutrazol (PBZ), chlormequat chloride (CCC), and daminozide (DMZ), respectively. Application concentrations were 50 and 100 mg·L-1 for PBZ; 100, 500, and 1,000 mg･L-1 for CCC; and 500, 1,000, and 2,000 mg·L-1 for DMZ. Paclobutrazol was the only PGR that inhibited stem elongation. The stem lengths of the plants treated with 50 or 100 mg·L-1 PBZ were 2.2 cm (13%) or 9.8 cm (57%) shorter, respectively, than those of the control. 50 mg·L-1 PBZ retarded stem growth effectively without negatively affecting flowering or other growth parameters, whereas 100 mg·L-1 PBZ caused excessive dwarfing and significantly reduced flowering by 59%. CCC and DMZ applications were ineffective for growth control. Flowering time was accelerated with most PGRs, except for 2,000 mg·L-1 DMZ, reducing the time to flowering by 2–8 days. These results indicate that the stem growth of M. laricina was successfully inhibited with PBZ but not with CCC or DMZ. Thus, we concluded that a single application of 50 mg·L-1 PBZ or similar treatment is effective in miniaturizing M. laricina without causing harm to its growth or aesthetic value, such as the flower number. Additionally, because CCC and DMZ are not persistent in the growing medium, testing multiple application times for these PGRs is crucial.

수십 년간의 세계화에도 불구하고, 기업들은 여전히 국내와 해외 시장에서의 마케팅 환경의 불일 치로 어려움을 겪고 있다. 기업들은 이러한 환경의 차이를 극복하기 위해 각 시장의 특성을 고려한 광고 어필(advertising appeal)을 이용하여 특정 메시지를 전달한다. 이에 따라 기업의 국내와 해외 시장에서의 광고 어필 사용의 차이가 존재하는데, 그 차이를 찾기 위해 본 연구는 한국과 말 레이시아에서 한국브랜드가 어떤 광고 어필을 활용하는지 살펴보려고 한다. 이번 연구는 유튜브 동 영상의 콘텐츠 분석을 통해 한국과 말레이시아 시장 간 광고 어필 사용의 차이를 도출하였다. 본 논문은 말레이시아 시장에서의 마케팅 커뮤니케이션 전략을 계획할 때 국내 마케팅 매니저들이 고 려할 수 있는 실질적인 시사점을 제시한다.