Self-piercing riveting(SPR) is a sheet joining method that can be used for materials which are difficult or unsuitable to weld, such as aluminum alloy and different steel sheet metals. No pre-drilled hole is needed for SPR; the rivets are pushed directly into the sheets clamped together between a blank holder and a die in a press tool. In this paper, self-piercing rivet and anvil were designed for four joining conditions with dissimilar sheet metals. SPR was simulated by using commercial FEM code DEFORM-2D. In simulation of SPR process, various strengths of self-piercing rivet were considered. The mechanical properties could be determined by tensile test for quenched rivets and sheet metals. The designs of rivet and anvil were modified by comparisons of simulated results.

RF-magnetron Sputtering Process를 이용하여 Pt/Ti/Si(100)기판위에 lanthanum-modified lead titanate 박막을 제작하였다. 기판온도와 증착시간이 증가함에 따라 증착율은 감소하였다. 기판온도가 증가함에 따라 fine grain들은 large grain으로 변화하였다. Perovskite구조는 기판온도 540˚C, gas pressure 30mtorr에서 나타나기 시작하였다. 본 실험에서 perovskite 박막제작에 대한 조건은 기판온도 580˚C, gas pressure 30mtorr였다. Pt/Ti/Si(100) 우선 배향된 박막을 얻었다. La양이 증가함에 따라 유전율, 항전계, 잔류분극량은 증가하였다. 중심주파수가 44.7MHz, 전파속도는 2680m/sec를 가지는 SAW filter 특성을 얻었다.

Result of test, adhesive strength improved 7% in 4℃ when test object used vibrating roller than unused vibrating roller. In case of 20℃, it improved 16.9%. Therefore, using vibrating roller is useful in construction of waterproofing layer because the test showed that using vibrating roller has excellent adhesive strength han unused it.

In water treatment facilities, cover having a various joint is applied to prevent the bad smell. In this study, each joint type of the aluminum cover that is applied to the sewage treatment facility, it was evaluated air tightness. As a result, it showed to be higher flat type better than stick out type.

The quality of injection sealer for water leakage maintenance be being managed by KS. However, the test result of response to the substrate movement performance have some errors by an experimenter. So, the revision standard of test method is proposed. Therefor, will verify that in this study.

we set reference temperatures for the 4 seasons of Korea and measured the humidity difference of underground structures according to the seasonal change by conducting a test with specimens that applied the same waterproofing materials and methods with basement structures. The test results show that the humidity difference of the specimens that applied unwaterproofed method and inside waterproofing method became higher according to the time variation regardless of temperature, while that of the specimens that applied outside waterproofing method was none or not significant.