제한된 토지의 효율적 이용을 위하여 건물들이 점점 더 거대화, 초고층화 되어가고 있기 때문에, 대형합성기둥에 대한 수요가 증가하고 있는 추세이다. 선행 연구를 통하여 리브를 갖는 냉간성형강재를 사용하여 구조적으로 안정적이며 경제적 인 충전강관기둥(ACT Column Ⅰ)이 기존에 개발되었으나, ACT Column Ⅰ은 크기가 제한(618×618)되는 문제가 있기 때문에 새로운 폭 1m이상 고하중용 대형합성기둥의 개발이 필요하다. 본 연구에서는 폭이 커지고 접합부 형식이 단순해지는 대형합성기둥(ACT Column Ⅱ)를 제안하고, 바인딩프레임이 보강된 실험체를 중심압축가력하여 구조성능을 확인하였다. 콘크리트 충전 여부 및 바인딩프레임의 보강 폭과 면적을 변수로 한 바인딩프레임 보강 실험체를 중심압축가력 하여 실험체 최대내력 값과 KBC2016 합성구조 설계메뉴얼에 따른 설계내력을 비교한 결과 ACT Column Ⅱ이 대형합성기둥으로써 안정적으로 거동함을 확인하였다.

콘크리트로 채워진 강관기둥은 많은 구조 시스템에서 기둥으로 널리 사용되며 강재가 항복하고 구속효과가 감소하여 국부 좌굴이 발생한다. 이러한 단점을 극복하기 위해 FRP를 보강하여 국부 좌굴을 지연시키는 방법을 제안한다. 이 논문은 반복 압축하에서 FRP로 보강된 CFT의 압축성능에 관한 것이다. 두 가지 유형의 FRP (Aramid FRP, SRF Polyester Belt)가 다양한 보강두께와 겹수로 CFT 외부에서 보강하여 비교 분석된다. 또한, CFRP에서 제안 및 사용된 공식에 기초하여 시험 기관의 실험 값을 평가하고 그것이 사용될 수 있는지를 결정할 것이다.

Recycled aggregate is a solution to reduce construction waste and to be environmentally friendly, but concrete using it has various disadvantages in terms of structure. Therefore, the interaction effect of the two materials can be expected by filling the cyclic aggregate concrete in the CFT column. Eighteen specimens were constructed to confirm the compressive behavior of RCFT (Recylced Concrete Filled Tube) columns, which can be applied to real buildings by making high strength concrete with recycled aggregate. Variable is the shape and thickness of steel pipe, concrete strength and mixing ratio, and coarse aggregate and fine aggregate are all used as recycled aggregate. A total of three recycled aggregate concrete preformulations were used to find the optimal mixing ratio and the compressive behavior was analyzed through the load - displacement curves of RCFT columns.

The utilization of composite columns is increasing due to the construction of high-rise buildings and large buildings. The commercially available concrete chimney steel column (ACT I) is a stable and economical structure, but there is a limit in the section size to be applied to a composite column subjected to a high load. We have developed a composite mega column with an integral structure by adding a plate to the central part of the ACT I column and installing a binding frame at a certain interval inside the central plate. In this study, to evaluate the compressive performance of the composite mega column, four test specimens were constructed with binding frame reinforcement, reinforcement spacing, and reinforced cross - sectional area. The structural performance of the composite section is compared with that of KBC2016 to evaluate the behavior of the specimen.

Composite columns are increasingly used due to the construction of super-tall buildings and large-scale buildings. Studies on the shapes of and construction technologies for structural members using steel tubes are being conducted actively. Welded built-up CFT columns previously developed and commercialized by the authors of this study (ACT-1 columns) are structurally stable and economically efficient. However, the 1m limit in the width of the columns and their small interior spaces impose a difficulty in installing reinforcing materials and thus deteriorate the ease and efficiency with which they are constructed. This study suggests placing thick plates at the centers of the surfaces of the existing ACT-1 column and installing a binding frame (binding frames) at the central thick plates to enhance the integrity and resist lateral pressure caused by concrete casting. Finite element analysis was conducted with the variables of the number and cross-sectional size of the binding frame and the cross-sectional size of the steel tube to estimate the structural behavior of the steel tubes. Hydraulic tests were conducted to analyze load-displacement relations and identify the influence of the binding frames on the relations. The variables in the tests were the number and cross-sectional size of the binding frame, welding details, column joint and the cross-sectional size of the steel tube

Axial force of the bolt is very important for structural stability. To obtain stability of the structure, axial force of the bolt should satisfy the specification and be maintained over the time. Hence, It is important to the axial force of the bolt is measured and it manages. However, measuring of the axial force using sensors is very expensive. Torque method using frequently in the field is difficult to confirm accurately by the torque coefficient change. In this study, measuring of axial force using elastic force of the spring washer was studied. First, the relational formula is drawn about the pressure in which the spring washer model changes to the annular of the plane state. According to the axial force of the bolt, the necessity height of the spring washer is presented and the finite-element analysis model is recommended. The analysis model research, generally, the axial force of high strength bolt is confirmed. It expands to confirmation of the large caliber bolt.

The shortwave aerosol direct radiative forcing (SWARF) was analyzed using the Clouds and Earth’s Radiant Energy System (CERES) data in the East Asian region from 2001 to 2010. In the Yellow Sea and the Korean Peninsula, located in the leeward side of China, significantly negative high SWARF at the top of atmosphere (TOA) occurs due to the long-range transport of anthropogenic (e.g. sulphate) and natural aerosols (e.g. mineral dust) from the East Asian continent. Conversely, eastern China has much higher levels of SWARF at the surface (SFC) due to anthropogenically emitted aerosol than in the Yellow Sea and the Korean Peninsula. Since the radiative forcing of aerosols in the atmosphere are different in type, aerosol types were classified into sea salt+sulphate, smoke, sulphate and dust by using satellite data. The analysis on the SWARF by the classified aerosol types indicated that sulphate occupies a predominant portion of the atmosphere in the Yellow Sea and the Korean Peninsula in the summer. In particular, the annual averages of the summer TOA SWARF increased in the Yellow Sea and the Korean Peninsula from 2001 to 2010.