We undertook the quantitative evaluations of Industrial Accident Prevention Program (IAPP). The six parameters, such as relevance, efficiency, consistency, sustainability, effectiveness, coherence, were chosen by expert plenary sessions. Two stage of Analytic Hierarchy Process were used to determine the weighted value of assessment criteria. This expert plenary suggests that the six parameters and its weight values are useful for quantitative evaluations of IAPP. Additional researches regarding the real world application of this assessment tool should be initiated.

The research of cold therapy is preceding rarely nowadays. This study was researched to measure the skin temperature of the right foot malleolus when the leg change the situation precisely speaking it was cold, elevation, cold plus elevation. Twenty young healthy volunteers(M:10, F:10)with no history of cardiopulmonary disease, peripheral artery disease were tested. This study were analyzed by one-way-repeated ANOVA. In the first we examined the within changes of the skin temperature between before and after examination for each modality. The skin temperature at all of modalities had fallen. Therefore we could know the fact that elevation plus cold modality had fallen skin temperature significantly more than elevation or cold. And there were no significant difference between male and female. We conclude that elevation and cold therapy could be better effective on edema, contusion and sprain than cold or elevation therapy independently.

This study was carried out to investigate the economic and environmentally friendly process of drying sludge by combining a mechanical dewatering filter press and thermal dryer. The dryer for 40 kg/hr of dewatered sludge consisted of a main dryer, a heat exchanger, a pre-dryer, and supplementary equipment. During the dewatering process, 100 kg of sludge with 80.11% water content was diluted and mixed with 400 kg of water and ferric chloride solution was added as a sludge conditioner. The average water content of dewatered sludge cake was 60.9% and the energy consumption rate (ECR) for removing water was 226.9 kcal/kg-H2O. Hot flue gas generated from the main dryer was utilized as heating air for the pre-dryer in the heat exchanger. When 36 kg/hr of dewatered sludge cake was dried, the ECR was 1,009 kcal/kg-H2O with 3.96% water content. The combined operation of the dewatering and the thermal drying processes showed that the ECR was reduced sharply to 521 kcal/kg-H2O. The high humidity gas generated from each drying unit in the main dryer was recirculated to the odor decomposition chamber in the main dryer to destroy odor components at a high temperature. The odor concentration of humid gas generated by the pre-dryer was very low due to the relatively low operating temperature.

다량으로 발생하는 하/폐수 슬러지를 처리하는 방법중 하나는 건조하여 고형연료로 활용하는 것이다. 본 연구에서는 파일럿 규모의 설비를 설계, 제작하여 하/폐수슬러지 탈수 및 건조특성을 연구하였다. 전처리 과정으로 슬러지 함수율을 낮추고 악취를 감소하기 위하여 염화제2철을 투입하여 탈수하였다. 건조공정은 연소실과 건조실이 통합된 최대 처리규모 40[kg/hr]인 일체형 건조기와 건조기에서 배출되는 고온, 고습의 배가스를 외부공기와 열교환하는 열교환기, 열교환기에서 가열된 외부공기를 열원으로 하는 밴드통기형건조기로 구성하였다. 슬러지는 탈수과정에서 함수율이 저감되므로 pin mill을 사용하여 분말화하여 밴드통기형건조기에 투입하였다. 밴드통기형건조기는 4단으로 구성되며 상부로부터 분말 슬러지가 공급되고 열풍은 하부로 공급되는 향류접촉방식이다. 1차 건조된 슬러지는 일체형건조기에 공급된다. 건조기 상부에 가스버너가 설치되어 발생한 열풍은 축열재를 거쳐 하부에 위치한 건조실을 지나 열교환기를 통과한 후 외부로 배출된다. 건조실내에는 4단의 paddle형 건조기가 설치되어 있으며 슬러지는 상부로부터 공급되어 차례대로 건조기를 통과한 후 로타리밸브를 거쳐 외부로 배출되고 건조용공기는 외부공기가 건조실내 pipe를 통과하면서 가열되어 각 건조기에 공급된다. 운전 데이타는 건조기가 열적평형에 도달한 기간중 취득하였다. 함수율 71.5%의 탈수슬러지를 31[kg/hr] x 8.5[hr] 공급시 배출된 건조슬러지는 72.96[kg]이었으며 이때 투입한 에너지는 203,320[Kcal]이었다. 순에너지소비율은 1,104[Kcal/kg-H2O]이었으며 함수율은 5.9%이었다. 함수율이 60.62%인 탈수슬러지를 36[kg/hr] x 4[hr]공급시 배출된 건조슬러지는 48.78[kg]이었으며 이때 투입한 에너지는 86,144[Kcal]이었다. 순에너지소비율은 1,009[Kcal/kg-H2O]이었으며 함수율은 3.96%이었다.

In this study, corrosion potentials were evaluated according to the composition ratio of Zn-Al alloy. Alloys were fabricated according to the composition ratio of Zn-Al. The corrosion potential was measured according to ASTM B 627-84. As a result of the study, the measured value of corrosion potential tended to increase with increasing composition ratio of Al.

In this study, corrosion potentials were evaluated according to the composition ratio of Zn-Al alloy. Alloys were fabricated according to the composition ratio of Zn-Al. The corrosion potential was measured according to ASTM B 627-84. As a result of the study, the measured value of corrosion potential tended to increase with increasing composition ratio of Al.

In this study, review anti-corrosion performance of the metal spraying sealing agents in according to molecular weight. It was evaluated according to KS D 9502 CASS test for determine anti-corrosion performance of sealing agents. Results showed, the molecular weight range of 20,000∼30,000 molecular sealing treatment manufactured through the control material exhibited the best performance.

This study is the adhesion strength of the sprayed metal in accordance with a proportion ratio of the Zn-Al. Results showed the most excellent adhesion strength for metal spraying Al100 For the metal spraying Zn100, ZnAl85, ZnAl95 exhibited a similar level of adhesion strength results.

This study is carbonation resistance of the natural durability enhancement materials that can reduce cracking of the concrete. The durability enhancement materials of natural were substituted 10%, 20%, 30% of cement, the results were confirmed excellent carbonation resistance as the more increasing the natural durability enhancement.

This study is the study of the strength characteristics of the study of the natural durability enhancement materials that can reduce cracking of the concrete. The durability enhancement materials of natural were substituted 10%, 20%, 30% of cement, the results were confirmed excellent strength as the more increasing the natural durability enhancement.

This study is the study of the chlorine ion penetration resistance of the study of the natural durability enhancement materials that can reduce cracking of the concrete. The durability enhancement materials of natural were substituted 10%, 20%, 30% of cement, the results were confirmed excellent chlorine ion penetration resistance as the more increasing the natural durability enhancement.

The most commonly used material of construction structures is steel. In this study, Epoxy-based coating materials and Ceramic-based coating materials durability were investigated. Exposed water immersion, chloride immersion, temperature changes, freezing and thawing for severe environments to simulate and environmental conditions are showed degraded in epoxy-based coating materials.

Concrete structures known that relatively safe for the fire, but the fire damage at different depending on the materials used will be affected, depending on the strength of the concrete damage situation appears different. In this study compared to compressive strength properties acooding to different type of concrete strength fire damege through about concrete structure is utilized as a basis for maintenance.

In this study we propose an effective method, Coating processing methods, which can improve the quality of recycled aggregate relatively easily without new equipment investment and complex treatment process and verify the improved effect using the devised method, Coating processing methods. To attain the research aim we used adequately diluted silicate solution for coating and carried out several property valuation for twelve types of material with different coating method. Also we formed concrete with coated aggregates which showed the best property. In conclusion the aggregates with the method of repeated impregnation in the silicate and drying showed the most excellent quality while other coating methods also resulted in an improvement of aggregate quality but failed to meet the KS Standard. Lastly with the optimal material we could obtain the approved compressive strength from the concrete allowing it to be utilized for road facility of which standard compressive strength of design is under 24MPa.

This study is to compare and analyze the characteristics of blast furnace slag for use in a NPP concrete, strength, drying shrinkage of concrete using fly ash and OPC. Experimental results, the OPC concrete drying shrinkage is the largest and most FA and GS the similar level.

Ground granulated blast furnace slag is known to be much less quality variation compared to the fly ash can be substituted. Have high salt damage resistance, and chemical resistance of concrete with ground granulated blast furnace slag substitution. The case of NPP concrete using fly ash in concrete, and is defined as less than 20% fly ash utilization. In this paper, consider a resistance to freezing-thawing of currently used to concrete in NPP structures and substitutes for ground granulated blast furnace slag

본 논문은 철근콘크리트 구조물이 화재를 입었을 경우의 최고 노출 온도 예측 및 화재손상 분석을 위하여 콘크리트 시험체에 대한 기기 분석적 고찰을 실시하였다. 시차열분석 결과, 200℃까지는 모세관수 및 겔수의 증발로 인한 강한 흡열피크가 일어났으며, 520℃정도에서 수산화칼슘 (Ca(OH)2)의 분해로 인해 흡열피크가 생성되었고, 흡열 반응으로 인해 시료의 중량이 크게 감소되었다. 720℃정도에서 칼사이트 (CaCO3)의 분해로 인해 또 한번의 강한 흡열반응이 발생한 것을 알 수 있었다. 또한 X-선 회절분석 결과, 400℃까지는 Ca(OH)2가 존재하지만 600℃이상부터는 CH성분은 거의 소멸되고 CaO의 성분이 나타났으며, 온도가 높을수록 생성량이 증가하였다. 이것은 화재 시 콘크리트의 온도가 증가될수록 Ca(OH)2과 CaCO3가 분해되어 CaO로 변환되기 때문이며, Ca(OH)2와 CaCO3가 완전히 분해되어 피크가 없어지고 대신 CaO의 피크가 크게 형성되는 온도 범위를 약 700~800℃로 추정할 수 있다. 주사형 전자현미경 분석 결과, 고열에 의해 콘크리트를 구성하고 있는 시멘트 반응생성물에서 결합수 및 겔수의 탈수로 인해 콘크리트의 수축이 발생함으로써 미세한 균열이 전반적으로 심하게 발생되는 것을 볼 수 있다. 이를 통해 보통 콘크리트가 열을 받으면 300℃부터 미세균열이 발생되어 500℃에서는 상당히 심하게 균열이 발생되는 것을 알 수 있다.

상관관계가 높은 복합열화의 완벽한 개별예측모델의 개발은 매우 어려운 문제로, 본 논문에서는 현수교 시스템의 미래열화와 유지 예산을 예측하기 위하여, 10년간의 유지 데이터가 주어진 매개변수(파손지표와 사용성)의 사후 확률 밀도함수를 찾기 위해 베이지언 추론을 적용하였다. 마르코프 연쇄 몬테카를로법을 이용하여 매개변수의 사후 분포를 조사하였다. 감소한 사용성의 모의위험예측은 사전분포와 연간유지 업무에서 업데이트한 데이터의 가능성에 따라 작성한 사후 분포이다. 기존의 선형 예측 모델과 비교하면, 제안된 2차 모델은 교량부품의 사용성, 위험요소, 그리고 유지 예산의 측정 데이터에 대하여 매우 개선된 수렴성과 근접성을 제공한다. 따라서 제안된 2차 추계학적 회귀 모델을 기반으로 복잡한 사회간접설비의 미래 성능과 유지관리예산을 예측하고 제어할 수 있는 기회를 제공할 것으로 기대한다.

초기 재령의 매스콘크리트는 양생과정에서 높은 온도를 유발한다. 수화열 저감 기법 중 내부구속이 지배적인 구조물에서 단면의 내외부 온도차를 관리하는 방식은 그 활용도가 매우 높다. 그러나 수화 균열을 예방하기위해 열경사를 조절하는 현재의 제한적인 방법은 콘크리트 중심과 표면 사이에 미세하거나 거대한 균열을 유발할 수 있다. 특히 냉각파이프를 이용하는 방법은 온도의 상승시에는 적용될 수 있지만, 내외부 온도차이가 심한 온도하강시의 대책으로는 적합하지 않다. 따라서 이 문제에 대한 해결방안으로 가열파이프를 동시에 사용하는 모델을 제안하여 유한요소법으로 해석하였다. 해석 결과, 제안된 냉각파이프와 가열파이프를 동시에 사용하는 방법이 열경사조절에 가장 효과적이며 이를 통해 온도균열을 효과적으로 제어할 수 있을 것으로 판단된다.