The green body of WC-Co cemented carbides containing polymeric binders such as paraffin, polyethylene glycol (PEG), and polyvinyl acetate (PVA) are prepared. The green density of the WC-Co cemented carbides increases with the addition of binders, with the exception of PVA, which is known to be a polar polymeric substance. The green strength of the WC-Co cemented carbides improves with the addition of paraffin and a mixture of PEG400 and PEG4000. In contrast, the green strength of the WC-Co does not increase when PEG400 and PEG4000 is added individually. The compressive strength of the green body increases to 14 MPa, and the machinability of the green body improves when more than 4–6 wt% paraffin and a mixture of PEG400 and PEG4000 is used. Simultaneously, the sintered density of WC-Co is as high as 99% relative density, similar to a low binder addition of 1–2 wt%.

At present, companies write daily work record or use bar-code in order to collect distribution flow data in real time. However, it needs additional works to check the record or read the bar-code with a scanner. In this case, human error could decrease accuracy of data and it would cause problems in reliability. To solve this problem, RFID (Radio Frequency Identification) is introduced in many automatic recognition sector recently. RFID is a technology that identification data is inserted into micro-mini IC chip and recognize, trace, and manage object, animal, or person using wireless frequency. This is being emerged as the core technology in future ubiquitous environment. This study is intended to suggest RFID application method in franchise business. Traceability and visibility of individual product are supplied based on EPCglobal network. It includes DW system which supplies various assessment data about product in supply chain, financial transaction system which is based on product transaction and position information, and RFID middleware which refines and divides product data from RFID tag. With the suggested application methods, individual product's profile data are supplied in real time and it would boost reliability to customer and make effective cooperation with existing operation systems (SCM, CRM, and e-Business) possible.

Multi-walled carbon nanotubes (CNTs) were prepared by microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts and methane precursor. The maximum yield (10.3 %) of CNTs was obtained using a methane-hydrogen-nitrogen mixture with volume ratio of 1:1:2 at 1000 W of microwave power. As the microwave power increased up to 1000 W, the deposition yield of CNTs raised from 4.1 % to 10. 3 %. However, the prepared CNTs at 800 W showed the more crystalline structure than those prepared at 1000 W. The prepared CNTs over different binary catalysts had various structural conformations such as aligned cylinder, bamboo, and nanofibers. The Id/Ig value of CNTs overFe-Fe/Al2O3, Co-Co/Al2O3, and Co-Cu/Al2O3 were in the range of 0.89~0.93. Among the various binary catalysts used, Fe-Co./Al2O3 showed the highest yield.

Although the structure of carbon nanotubes is important factor characterizing its properties, it is very difficult to control the structure of carbon nanotubes (MWNTs) and to predict the range of their diameter, which is the primary factor of MWNTs' physical properties. We tried to control the diameter of MWNTsby governing the feed injection temperature of floating catalyst method. The structure of MWNTs was influenced by the phase change of ferrocene fed as the catalyst,. The carbon nanotubes were very narrow at injection temperatures close to the sublimation pt. of ferrocene, in which most MWNTs had diameters in the range of 20~30 nm. At injection temperatures between the boiling pt. and melting pt. of ferrocene, the diameters became larger and had broad distribution. However, at injection temperatures higher than the boiling pt., the diameters became narrow again and had very uniform distribution.

Multi-walled carbon nanotubes (CNTs) were prepared by thermal chemical vapor deposition (CVD) and microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts with four transition metals such as Fe, Co, Cu, and Ni. In the preparation of CNTs from acetylene precursor by thermal CVD, the CNTs with very high yield of 43.6 % was produced over Fe-Co/Al2O3. The highest yield of CNTs was obtained with the catalyst reduced for 3 hr and the yield was decreased with increasing reduction time to 5 hr, due to the formation of FeAl2O4 metal-aluminate. On the other hand, the CNTs prepared by acethylene plasma CVD had more straight, smaller diameter, and larger aspect ratio(L/D) than those prepared by thermal CVD, although their yield had lower value of 27.7%. The degree of graphitization of CNTs measured by Id/Ig value and thermal degradation temperature were 1.04 and 602℃, respectively.

Electrical properties of carbon filler/PVdF [poly(vinylidene fluoride)] composite were investigated as a funtion of carbon filler/PVdF ratio in the range of 0.2~0.5. Three kinds of comercialzied conductive carbon blacks such as Hiblack 41Y, KE300J, and KE600J, and carbon nanofibers prepared by the catalytic chemical vapor deposition of C2H4 over Ni-Cu catalysts were used as the carbon fillers. The electrical conductivity of carbon filler/PVdF composites were in the range of 0.65 to 13.5 S/cm depending the fillers' electrical conductivity ranging from 5.6 to 23.1 S/cm. Among the carbon fillers used, the KE600J carbon black showed the highest conductivity both in the composite and filler itself because of its high degree of graphitization due to the high-temperature thermal treatment and its high surface area due to the activation treatment.