In this study, seismic performance of bushings and their connection parts was analyzed by performing shaking table tests for various types of bushings widely used as auxiliary equipment of main transformers in domestic substations. As a result of the seismic tests of five types of 154 kV bushings according to the manufacturers, all the bushings secured the structural integrity even at the acceleration of 1.4 g and it was found that leakage of insulating oil didn't occur. Also, the average acceleration amplification rate at the upper part of the bushings was about 2.5 to 3.0 times higher than the lower one. On the other hand, when a representative 345 kV bushing was subjected to the seismic test, the structural integrity was secured even at 1.0 g acceleration similar to the design earthquake load level, but in this test, leakage of insulating oil occurred. However, when a stiffener restricting the connection of the bushing is installed in the same 345 kV bushing, the displacement of the bushing connection is controlled and the stiffener prevent the oil from leaking even at the acceleration of the designed seismic level.

While the air quality of public facilities such as daycare centers is managed by law, the management of air quality in residential buildings is not mandatory. For this reason, air quality in an apartments has not been well surveyed. In this study, we investigated the influence of cooking and ventilation on the indoor air quality in an apartment. Continuous measurements were performed using real-time monitoring instruments from June 9 to 17, 2014 in Seoul, Korea. A CO2 meter was used to measure CO2 concentration and temperature. A portable aerosol spectrometer (0.25-32 μm), a nanoparticle aerosol monitor (10-1,000 nm), and an aethalometer (total suspended particulate, black carbon) were also used. During the measurement period, ventilation and cooking activities were observed 8 and 10 times, respectively. In 5 of the observed cases, both activities were done simultaneously. During the ventilation, CO2 concentration and temperature were decreased; however, particle concentrations were increased. When cooking was done, particle concentration was increased in some cases; however, CO2 concentration and temperature were unchanged. Combined cased CO2 concentration and temperature were decreased and particle concentrations were increased.

This study presents a sustainable design method to optimize the embodied energy and CO2 emission complying with the design code for reinforced concrete column. The sustainable design method effectively achieves the minimization of the environmental load and energy consumption whereas the conventional design method has been mostly focused on the cost saving. Failure of reinforced concrete column exhibits compressive or tensile failure mode against an external force such as flexure and compression; thus, optimization analyses are conducted for both failure modes. For the given sections and reinforcement ratios, the optimized sections are determined by optimizing cost, embodied energy, and CO2 emission and various aspects of the sections are thoroughly investigated. The optimization analysis results show that 25% embodied energy and 55% CO2 emission can be approximately reduced by 10% increase in cost. In particular, the embodied energy and CO2 emission were more effectively reduced in the tensile failure mode rather than in the compressive failure mode. Consequently, it was proved that the sustainable design method effectively implements the concept of sustainable development in the design of reinforced concrete structure by optimizing embodied energy consumption and CO2 emission.

The number of children who use day-care centers is increasing. Most indoor air quality (IAQ) management has been based on daily average pollutant concentrations measured once a year. A more comprehensive management of IAQ is needed to protect children’s health from air pollutants in day-care centers. In this study, we investigated the weekly variation of air pollutant concentrations in a nursing room of a day-care center located at the roadside for a week in June of 2014. Average concentrations of CO2, PM10, black carbon, and total surface area of lungdeposited particles during nursing time of the day-care center were 510 ppm, 27.8 μg/m3, 1.87 μg/m3, and 30.6 μm2/cm3, respectively, with a similar diurnal pattern shown on weekdays.

A press which has a 20 percent share in machine tools is one of the production facilities. Recently hydraulic press is used to reinforce competitiveness of the manufacturing industry. The press by using metal powder makes products without additional process while conventional processing machine makes products after removing unnecessary parts. In this way, large quantity of products can be produced in a short time. Researches to manufacture products by the press have been proceeding after 1970. In this study, structure and displacement analysis for shape parameters for punch used as the component for hydraulic press was investigated and structural stability was identified based on the results.

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

왕피천에 출현하는 어류상 및 어류군집의 특성을 파악하고자 2015년 4월부터 10월까지 조사하였다. 본 조사에서 확인된 종은 모두 15과 40종이었으며, 개체수 우점종은 Zacco koreanus(31.3%) 이었고, 아우점종은 Rhynchocypris oxycephalus(14.7%) 이었다. 생체량 우점종은 Z. koreanus(29.2%) 이었고, 아우점종은 Coreoperca herzi(8.6%) 이었 다. 한국고유종은 Squalidus multimaculatus 등 9종(22.5%) 이었고, 멸종위기종은 Lethenteron reissneri와 Cottus koreanus 이었다. 양식용으로 국외에서 도입된 Oncorhynchus mykiss 1종이 확인되었다. 이전 연구보고 이후 본 조사에 서 처음 출현이 확인된 종은 L. reissneri, S. gracilis majimae, Pseudobagrus fulvidraco, O. mykiss, Chelon haematocheilus, Siniperca scherzeri, Acanthogobius lactipes, Luciogobius guttatus 및 Channa argus 등 9종이었다. 서식이 확인된 Rhodeus ocellatus, S. gracilis majimae, Hemibarbus longirostris, Pseudogobio esocinus, Microphysogobio yaluensis, Hemiculter eigenmanni 및 Cobitis hankugensis 등 7종은 국내 다른 수계에서 이입된 것으로 추정된다. 주요 회유종인 Tribolodon hakonensis, O. keta 및 Plecoglossus altivelis을 대상으로 서식특성을 분석한 결과, O. keta는 St. 11, T. hakonensis는 St. 7, 10 및 11 등 주로 하류에서 확인되었으나 P. altivelis은 St. 3∼St. 11까지 넓게 분포하였다. 한편 조사 지점에 따라 동일한 시기에 P. altivelis의 평균체장 차이를 비교한 결과, 중 ․ 상류(St. 3과 St. 5)에서 채집한 개체들의 체장은 125.8±34.2㎜로 중 ․ 하류(St. 8과 St. 11)에서 채집된 개체의 80.2±16.6㎜보다 성장이 양호하였다. 이는 보와 같은 인공구조물에 의한 결과로, P. altivelis의 자유로운 이동 및 자원관리를 위하여 적절한 형태의 어도가 필요하였다.

A press which has a 20 percent share in machine tools is one of the production facilities. The press has been used to make a hole or to bend metal plates. However, recently hydraulic press is used to reinforce competitiveness of the manufacturing industry. The press by using metal powder makes products without additional process while conventional processing machine makes products after removing unnecessary parts. In this way, large quantity of products can be produced in a short time. Researches to manufacture products by the press have been proceeding after 1970. In this study, structure and displacement analysis for punch used as the component for hydraulic press was investigated and structural stability was identified based on the results

괴산호에 서식하는 어류상 및 군집구조를 알아보기 위하여, 2010년 4월부터 2012년 10월까지 조사하였다. 본 조사에서 확인된 종은 모두 11과 36종이었으며, 개체수의 우점종은 Hemibarbus labeo (29.9%)와 Zacco platypus (20.0%)이었고, 생체량의 우점종은 H. labeo (37.2%)와 Carassius auratus (17.9%) 순이었다. 한국고유종은 14종(38.9%), 법적보호종인 Acheilognathus signifer 1종, 방류된 강하성 어류인 Anguilla japonica, 회유종이지만 육봉화된 Hypomesus nipponensis, Plecoglossus altivelis 2종이 분포하였고, 외래도입종인 Cyprinus carpio (Israeli type), C. cuvieri, Micropterus salmoides 3종이 출현하였다. 괴산호의 주요 분포종인 C. auratus, M. salmoides 개체군의 전장-체중 관계식에 의한 매개변수 b값은 3.13∼2.99, 3.11∼2.99로 해마다 감소하였으나, H. labeo, Z. platypus 개체군은 2.98∼3.07, 3.06∼3.23으로 증가하는 경향을 보였다. C. auratus, M. salmoides 개체군의 비만도 지수 기울기도 해마다 감소한 반면, H. labeo와 Z. platypus 개체군은 증가하는 경향을 보였다.

It is well known that smoking generates harmful air pollutants. With smoking in buildings as well as in the streets prohibited, the need for smoking rooms has emerged. In this study, particle and CO contamination in a 63.6 m3 smoking room was experimentally investigated using Korean tobacco. Tobacco smoking was artificially simulated using a smoking machine. The number and size distribution of particles ranging from 10-420 nm and 0.25-32 μm were measured using a Nanoscan (TSI model 3910) and a portable aerosol spectrometer (Grimm model 1.109), respectively. CO concentration was also monitored using an IAQ monitor (Graywolf IAQ-Xtra 610). Four tobaccos were simultaneously smoked in each experiment, and the experiment was repeated four times. Maximum CO concentrations of 7-10 ppm were observed and high concentrations of particles (176,000-1,115,000 particles/cm3 for 10-420 nm, 3,700-5,200 particles/cm3 for 0.25-32 μm) were also monitored. The dominant size of tobacco particles was about 100 nm in diameter.

The present paper takes it as focal point is New Land Reform in China. Through New Land Reform, The Chinese Government seeks to increase peasant’s income and improve the efficiency of rural land. Since 2008, in many areas of China has been experimenting with the distribution of rural land. Chongqing model(The system of land quota) is watched by Chinese society with interest. The purpose of this paper is to certify whether the increase in peasant’s income through Chongqing city. Results are as follows. First, Since enforcement of the system of land quota, Chongqing peasant’s income has increased more than China and Chengdu City. Second, Chongqing peasants are growing rapidly property income more than business income and earned income. Third, Urban-rural income gap in Chongqing city was reduced more than China but no difference with Chengdu city. In conclusion, Although there are many problems the system of land quota but Has a positive effect on peasant’s income.

흑마늘을 이용하여 와인을 제조해보고 숙성 칩의 종류에 따른 향기 성분의 변화를 조사하였다. 흑마늘 와인을 제조한 후, 저장 조건으로 미국산 칩과 프랑스산 칩을 이용하여 3개월간 10oC에서 숙성하여 흑마늘 와인을 완성하였다. 향기 성분을 분석을 위하여 GC/MS를 이용하였다. 미국산 칩을 사용한 경우 주요 향기성분으로 2-methyl-1- propanol, 3-methyl-1-butanol, 2-methyl-1-butanol, acetaldehyde, butanoic acid, octanoic acid, 1,1-diethoxyethane, allyl methyl sulfide가 검출되었다. 프랑스산 칩을 사용한 경우 에는 1-propanol, 2-methyl-1-propanol, 3-methyl-1-butanol, acetaldehyde, acetic acid, propanoic acid, butanoic acid, octanoic acid, 2-heptanone, 1,1-diethoxyethane, N-amino32- hydroxypropanamidate, n-butylamine, chloroacetonitrile, allyl methyl sulfide가 주요성분으로 검출되었다. 미국산 칩을 사용한 와인에서 과일향성분인 n-propylacetate, butanoic acid, octanoic acid가 상대적으로 높게 검출되었고, 흑마늘에서 기인된 allyl methyl sulfide는 미국산 칩을 사용한 경우에서만 검출이 되었다. Acetic acid는 프랑스산 칩을이 용한 경우에만 검출되었다.

Nongmingong provides Labor Force in the Cities and Enterprises had been the Source of Economic Development. Since the Global Financial Crisis in 2008, As the Global Economic Downturn China's Economic System was the need to change. The Chinese Government has required the Development of New Power So Nongmingong was received the Attention. However Nongmingong do not have the Necessary Conditions for a Differentiation Hierarchy. First, the Differentiation Hierarchy of Nongmingong the biggest Factors that interfere is a Dualistic Hukou System. Dualistic Hukou system is limited Economic Resources of Nongmingong. Second, Nongmingong has almost no resources required for Differentiation Hierarchy. Nongmingong has almost no Organizational resources, From the perspective of Cultural resources, Nongmingong are mostly Middle School and there is no Technical Qualifications. So Nongmingong are mainly engaged in Physical Labor. From the perspective of Economic resources, the Recent Increase in the Wages of Nongmingong, but it is not enough Differentiation Hierarchy. Third, due to Obstacles to Nongmingong in China's Social and Economic Influence is limited. In order to Consumption Extension of Nongmingong must be expanded the Social Security System and must be reformed Hukou System. For Industrial Upgrading must be expanded Technical Education and must bed foster Skilled Workers.

충남 보령시의 웅천천에 설치된 댐(어도 설치)과 대형 보(어도 미설치), 그리고 상류지역의 인근 폐광이 어류군집에 미치는 영향에 대해 알아보기 위하여 2011년 4월부터 10월까지 4회에 걸쳐 10개 지점의 어류상을 조사하였다. 총 12과 36종의 어류가 채집되었으며 우점종은 Zacco platypus(23.4%), 아우점종은 Zacco koreanus(20.5%) 였다. 고유종은 10종(27.8%)이었으며, 외래도입종인 Micropterus salmoides가 출현하였다. 유사도분석 결과 상류인 St.1, St.2, St.3, 중류인 St.4, St.5, St.6, St.7 하류인 St.8, St.9, St.10의 세 그룹으로 구분되었다. 어도가 설치된 보령댐의 상하류 지점간(St.6-St.7)의 군집유사도는 높았으나, 어도가 설치되지 않은 대형보의 상하류 지점간(St.7-St.8)의 유사도는 매우 낮아 어도의 설치가 필요하였다. 정준상관분석 결과, 웅천천의 환경조건은 일반적인 하천과는 달리 상류에서 전기전도도와 염도가 높게 나타났으며 이러한 환경에서 Misgurnus mizolepis 외에 고유종인 Silurus microdorsalis, Coreoleuciscus splendidus, Iksookimia koreensis 등이 서식하고 있었다. 하폭이 크고 유속이 느린 하류역에는 외래도입종인 M. salmoides 외에 고유종인 Squalidus gracilis majimae 이 동소적으로 출현하고 있어 이들을 위한 보호 대책이 필요하였다.

The loudspeaker is the directly radiated speaker which generates the sound by the vibration of cone paper. Therefore the shape and the vibration characteristics of th cone paper is important factors affecting the performance of speaker. The vibration mode of cone paper is piston mode that vibrates to the up-down direction, and we can see the divided vibration in the higher mode. Because the loudspeaker has a damper, the vibration mode is different to the mode of the only cone paper. In this study, the vibration mode of cone paper which considering the damper and the effects of the damper diameter were investigated by finite element method

PURPOSES: The purpose of this study is to develop the U-turn accident model at 4-legged signalized intersections in urban areas. METHODS : In order to analyze the characteristics of the accidents which are associated with U-turn operation at 4-legged signalized intersections in urban areas and develop an U-turn accident model by regression analysis, the tests of overdispersion and zero-inflation are conducted about the dependent variables of number of accidents and EPDO (Equivalent Property Damage Only). RESULTS: As their results, the Poisson model fits best for number of accident and the ZIP (Zero Inflated Poisson) fits best for EPOD, the variables of conflict traffic, width of opposing road, traffic passing speed are adopted as independent variable for both models. The variables of number of bus berths and rate of U-turn signal time at which the U-turn is permitted are adopted as independent variable only for EPDO. CONCLUSIONS: These study results suggest that U-turn would be permitted at the intersection where the width of opposing road is wider than 11.9 meters, the passing vehicle speed is not high and U-turn operation is not hindered by the buses stopping at bus stops.

Black fermented garlic includes many pharmacological components. Therefore, in this study, black fermented garlic wine was manufactured and its flavor compounds were investigated difference of aging chips from America and France. The fermented wine was stored at 10oC for 6 months. GC/MS was used for the flavor components analysis. Wine using American chip contained 2-methyl-1-propanol, 3-methyl-1-butanol, 2-methyl-1- butanol, acetaldehyde, butanoic acid, octanoic acid, 1,1-diethoxyethane, and allyl methyl sulfide. 1-Propanol, 2- methyl-1-propanol, 3-methyl-1-butanol, acetaldehyde, acetic acid, propanoic acid, butanoic acid, octanoic acid, 2- heptanone, 1,1-diethoxyethane, N-amino32-hydroxypropanamidate, n-butylamine, and chloroacetonitrile were detected as major flavor compounds using France chips. Especially, the wine contained allyl methyl sulfide that was resulted from black fermented garlic. There were more compounds that smell like fruit in the wine using American chips relatively. And allyl methyl sulfide was detected only in the wine using America chips. Whereas acetic acid was detected only in the wine using France chips

본 논문은 MLS(Moving Least Squares) 차분법을 바탕으로 동적균열전파 해석을 수행하기 위한 알고리즘을 제시한다. MLS 차분법은 절점만으로 이루어진 수치모델을 사용하며, 이동최소제곱법을 이용하여 전개한 Taylor 다항식을 기초로 미분근사식을 유도하기 때문에, 요소망의 제약에서 완벽하게 벗어난 절점해석이 가능하다. 시간항을 포함하는 동적 평형방정식은 Newmark 방법으로 시간적분 하였다. 동적하중을 받는 균열이 전파할 때, 매 시간단계마다 절점모델을 재구성하지 않고 균열선단 주변에서 국부적인 수정을 통해 해석이 가능하다. 동적균열을 묘사하기 위해 가시한계법(visibility criterion)을 적용하였고, 동적 에너지해방률을 산정하여 균열의 진전유무와 그에 상응하는 진전방향을 결정하였다. 모드Ⅰ 상태와 혼합모드 상태에서 균열이 진전하는 현상을 모사하였고, 이론해와 Element-Free Galerkin법으로 계산한 결과와의 비교를 통해 개발된 알고리즘의 정확성과 안정성을 검증하였다.

하천에 설치된 인공구조물이 어류군집의 분포에 미치는 영향을 파악하기 위하여, 2012년 4월부터 10월까지 서해로 유입되는 독립하천인 대천천에 서식하는 어류상을 조사하였다. 본 연구에서 확인된 어류는 총 13과 42종이었으며, 개체수에 있어서 우점종은 Zacco platypus(32.3%)와 Tridentiger brevispinis(12.8%)가 우점하였고, 생체량에 있어서는 Z. platypus(27.7%)와 Chelon haematocheilus(11.9%)가 풍부하였다. 한국고유종은 8종(19.9%), 법적보호종인 Rhodeus pseudosericeus, 회유성어종인 Anguilla japonica, 외래도입종인 Carassius cuvieri와 Micropterus salmoides 가 출현하였다. 우점종인 Z. platypus 개체군의 전장-체중의 관계식에 의한 회귀계수 b값은 3.21~3.29, 비만도지수는 평균 0.89로 비교적 양호한 성장도를 유지하고 있었다. 유사도분석을 통한 대천천의 어류군집은 청천저수지 상류구간(St. 1), 성업사보 하류구간(St. 5)과 St. 2~4 구간의 세 그룹으로 나뉘어졌으며, 조사지점별 우점종은 Zacco koreanus(St. 1), Z. platypus(St. 2~4), T. brevispinis(St. 5) 등 이었다. 대천천의 어류군집은 하천에 설치된 인공구조물인 저수지와 보에 의해 뚜렷하게 나뉘어졌다.

PURPOSES : The intents of the study are to identify the accident factors and to demonstrate the potentials of tobit model as a tool to study the number of accidents on arterial roads segments. METHODS : This paper uses a tobit regression as a methodology to analyze the factors affecting the number of accidents. In pursuing the above goal, this study gives particular attentions to analyzing the data of 2,446 accidents (1,610 in major arterial roads and 836 in minor arterial roads) occurred on arterial roads in 2007 to 2010. RESULTS : First, 3 accident models which were classified by total arterial roads, major arterial roads and minor arterial roads, and were all statistically significant were developed. Second, the exclusive right-turn lane as common variable, and the number of accident, traffic volume, number of lanes, link length, rate of median, number of entrances, number of pedestrian crossings, number of curves, number of bus stops and exclusive left-turn as specific variables of the models were selected. Finally, the paired sample t-test could not be rejected the null hypotheses of three types of models. CONCLUSIONS : Using data from vehicle accidents on arterial roads, the estimation results show that many factors related to roadway geometrics and traffic characteristics significantly affect to the number of accidents.