The international SPICE (Software Process Improvement and Capability determination) Project ISO/IEC 15504(SPICE : Software Process Improvement and Capability determination) is an emerging International Standard on SPA(Software Process Assessment). A prime motivation for developing this standard has been the perceived need for an internationally recognized software process assessment framework that pulls together the existing public and proprietary models and methods. A SPICE assessment can be considered as one of representative SPA model since assessors assign ratings to indicators and metrics to measure the capability of software process. But this models doesn't provide a systematic measurement procedures and dynamic method for SPI(Software Process Improvement). Through the evaluation of SPICE is capable of providing a substantiated basis for using the notion of capability, as well as providing information for nacessary improvements to the standard using 6sigma process. As a result, this paper propose a measurement procedure and guidelines for application of 6sigma process to guarantee the reliability in SPI and suggest the structure to support SPI on overall organization.

Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for muliple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index MCpm using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other,

This paper examines to focus on General Strategy of e-logistics activity for SCM(Supply Chain Management) Build-up, especially the field service logistics integration. And this research analyzes the case study(Business of Strategy Group Unit) Survey involving effective logistics management that leads customer satisfaction, seeking to find out the key elements of competitive policy. Because problems arise from the differences between their goals and structures, which cause each side to feel vulnerable to opportunism or shirking of responsibilities by the other. The goal of a logistics system is to ensure that every family planning client always receives the contraceptives partner wants, and that they are in good condition and have not expired. In order to select, procure, and distribute the right quantities of the right contraceptives, managers of the logistics system must keep informed of the rates of use of each contraceptive and of the quantity of available supplies. As a result, We propose that a firm's e-logistics safe strategy is an important locus innovation and a crucial source of value creation for the firm its suppliers, partners, and customers.

Information systems introduction and application are increasing suddenly from the enterprises while approaching the information age. It requires to manage the IS performance and understand quality of information systems for obtaining the competitive power of the enterprise through IS. Six Sigma is widely recognized today as a process improvement methodology that can cut costs and eliminate defects in information industry as well as manufacturing processes. This study provides a framework for managing performance of information systems which are used to obtain competitive advantage.

This study aims to examine the usefulness on the Evaluation Process for the Feasibility & Priority of A Certain Public Projects. and the Methodology used AHP(Analytic Hierarchy Process) which used pairwise comparisons of the alternatives and criteria for solving discrete alternative multicriteria decision problems. In this paper, we present a similar phenomenon, rank reversal problem, when we apply the AHP to group decision making process. The problem is identified by an example problem in that the previous rank order of Public Projects choices. we also present three different methods to prevent the undesirable characteristic of the original AHP in appling to Decision Making Process.

What is the most important in articles of food is hygienic safety. Because food Is the most common thing in our everyday life, however, the importance of its hygienic safety and other many problems caused by food may be easily neglected. What is more, food is can be dangerous as much as it is directly related to human life and accidents from the same cause may have different effects on the victims according to physical and environmental differences of individuals. Thus PL action for food requires more thorough prevention and measure. Korea has been enforcing 'the Product Liability Act' since the 1<SUP>1st</SUP> of July 2002. Product Liability (PL) is liability of the manufacturer or the seller of a product to compensate for the death or injury of consumers or the loss of properties caused by the defect of the product. This study surveyed consumers' response to and the effects of the enforcement of the Product Liability Act, investigated how consumers perceived the importance of food safety and the risk of defective food based on PL standards and their experience in damage by food through a questionnaire survey, and analyzed collected data through empirical analyses (reliability analysis, factorial analysis, regression analysis and ANOVA t-test) using SPSS 10.0. Based on the results of analysis, the researcher proposed strategies for coping with the Product Liability Act in the food industry

Companies adopted a program called Six Sigma, in order to make fundamental changes in the way the company operated to fulfill customers' expectations. Six Sigma reduces the occurrence of defects. This approach derives the overall process of selection the right projects based on their potential to improve performance metrics and selection and training the right people to get the business results. However, in the course of Six Sigma process steps, companies are in the face of problems. This study is to solve the problems using TP(Thinking Process) of TOC(Theory of Constraints). TOC is methodology for solving key problem in system which is called Constraints. Nowadays, its application is going to be wide and its concept is being implemented. In this paper, it is showed possibility of application TOC to Six Sigma.

Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for multiple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index MCpm using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other.

Finding an optimal solution in MADM(Multi-Attribute Decision-Making) problems is difficult, when the number of alternatives, or that of attributes is relatively large. Most of the existing mathematical approaches arrive at a final solution on the basis of many unrealistic assumptions, without reflecting the decision-maker's preference structure exactly. In this paper we suggest a model that helps us find a group consensus without assessing these parameters in specific cardinal values. Therefore, This research provides a comprehensive Decision Making of the theory and methods applicable to the analysis of decisions that involve risk and multiple criteria attributes. after, The emphasis of the procedure will be on developments from the fields of decisions analysis and utility theory of Taguchi Method. This theoretical development will be illustrated through the discussion of several real-world application and a case study. When the multiple number of decision makers are involved in the decision making procedure, the problem of uncertainties invariably occurs, because of the different views between them. In this paper, New decision making model using Taguchi Method is applied to effectively model the multi-attribute-decision making(MADM) procedure in the uncertainties dominated two area(quantitative and qualitative factors), Quantitative factors evaluation is used Loss Function of Taguchi, qualitative factors evaluation is used S₩N ratio by each specialist. thus it can be used for aiding of preferable alternative. as a result, We will be proved efficiency about New decision making model of applied Taguchi Method with Analytical presentation of all the expecting outcomes when a specific strategy or an alternative plan is selected under expecting future environment.

Finding an optimal solution in MADN[(Multi-Attribute Decision-Making) problems is difficult, when the number of alternatives, or that of attributes is relatively large Most of the existing mathematical approaches arrive at a final solution on the basis of many unrealistic assumptions, without reflecting the decision-maker's preference structure exactly. In this paper we suggest a model that helps us find a group consensus without assessing these parameters in specific cardinal values. Therefore, This research provides a comprehensive Decision Making of the theory and methods applicable to the analysis of decisions that involve risk and multiple criteria attributes. after, The emphasis of the procedure will be on developments from the fields of decisions analysis and utility theory of Taguchi Method. This theoretical development will be illustrated through the discussion of several real-world application and a case study. When the multiple number of decision makers are involved in the decision making procedure, the problem of uncertainties invariably occurs, because of the different views between them. In this paper, New decision making model using Taguchi Method is applied to effectively model the multi-attribute-decision making(MADM) procedure in the uncertainties dominated two area(quantitative and qualitative factors), Quantitative factors evaluation is used Loss Function of Taguchi, qualitative factors evaluation is used 50 ratio by each specialist. thus it can be used for aiding of preferable alternative. as a result, We will be proved efficiency about New decision making model of applied Taguchi Method with Analytical presentation of all the expecting outcomes when a specific strategy or an alternative plan is selected under expecting future environment.

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

해저에 설치된 파이프에서 분출되는 기포에 의해 형성된 강한 수평압력분포를 이용하여 선박을 신속 하고 정밀하게 유도, 정박시키는 도선시스템으로 항구, 협수로, 해협 등과 같이 복잡한 수상, 수중 장애물 지역에서 선박을 신속하고 정밀하게 유도함과 동시에 협소한 부두에 안전하게 선박을 정박시키기 위하여 본 도선 시스템을 고안하였다.

The results of this study has been split into two components, On set of results addressed the strategy of developing a Agility for maintenance consumer. The other set of results addressed the strategy of illuminating the successful measurement and concepts formed during the maintenance problem solving process, especially in the context of the Logistics Information system by aggregation information space. This paper presented a classifiable elements of Agility & Measurement of logistics capability in the Korea market. These concepts are positioned in a framework to give a better understanding what the consequences are of the changing business environment. The developments towards more globalization which leads to centralization and mass individualization that has a tendency to go more in the decentralized solutions, seems to be in contradiction. we will focus a proposal of Logistics information system and demand management decisions that should be a prime concern of any profit maximizing firm, unready strategy of investment. and we will prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influnce for a cause and effect basically.[5]

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

This paper examines to focus on General Strategy of e-logistics activity for SCM(Supply Chain Management) Build-up, especially the field service logistics Integration. And this research analyzes the case study(Business of Strategy Group Unit) Survey) involving effective logistics management that leads customer satisfaction, seeking to find out the key elements of competitive policy. Because problems arise from the differences between their goals and structures, which cause each sied to feel vulneralbe to opportunism or shirking of responsibilities by the other. The goal of a logistics system is to ensure that every family planning client always receives the contraceptives partner wants, and that they are in good condition and have not expired. In order to select, procure, and distribute the right quantities of the right contraceptives, managers of the logistics system must keep informed of the rates of use of each contraceptive and of the quantity of available supplies. As a result, We propose that a firm's e-logistics strategy is an important locus innovation and a crucial source of value creation for the firm its suppliers, partners, and customers.