It is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSIM(Process Safety Information Management) evaluation method in the construction. The reason why PSIM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges.

Safety diagnostic indicator pointer can divide by greatly two. One is management (Software) side that one that differ with mechanical (Hardware) side that handle laying stress on equipment connected with safety manages organization and management connected with safety. Weight appropriates according to specific gravity that relevant element occupies in facilities. To give so big value in particular element in grant of weight pays attention because break balance of whole guideline and should gives. Finally, efficient safety net may see effect before self-regulation inside by minimum target establishment using AHP by government and legal, systematic countermeasure establishment for this, strict law application and each business proprietor and though activity and user's active safety activity forms harmony properly.

Generally, Fixed Quantity ordering system (Q-system) uses linear model in inventory decrease. This paper focuses on that Fixed Quantity ordering system (Q-system) is based on a continuous review system. To use a continuous review system is because of an inventory decrease ration is not constant. Therefore, this paper introduces a method to select a model which is proper to virtual data under conditions which are inconstant.

본 연구에서는 반도체 업체인 M사의 공정을 조사하고 현재 M사의 일정계획 순서와 기존에 연구되었던 일정계획 방법에 대한 결과를 조사한 후 CLV 알고리즘을 적용한 일정계획 기법을 시뮬레이션을 통해 비교 분석하고 알고리즘에 대한 타당성을 검증하고자 한다. CLV 알고리즘을 통한 고객 분류에 의해서 ATP rule을 적용한다면 생산 공정상의 일정계획이 조정되어 고객이 원하는 납기 준수를 달성할 수 있을 것이다. 또한 기존 연구와의 비교 분석을 위하여 시뮬레이션의 수행은 기존 연구 수행일과 동일한 시간(2003년 11월12월)을 기준으로 수행하였다.

Facility layout for enterprise's competitive power strengthening and construction of offensive manufacture line and direction presentation for design of production management system that is new by operation improvement according to S company. In enterprise in JIT(Just in Time) system of leading persons affecting in productions among a lot of habitat factor analyze. It is that through equipment Layout among those factors enterprise my problem improve and serves enterprise's absolute ability cultivation. Even if it is JIT production main point that affect to apply the modular production to productive system among at equipment Layout, lot size, bottleneck session etc. worker's multi-function anger, change of demand factor and productive capacity add. 'S' Through enterprise's example, I wish to establish Korean medium and small enterprises' manufacturing industry style equipment Layout model by taken place effect interpretation.

As environmental damage increase by a highly developed material civilization of today, many companies take a growing immensely interest in the influence of environment for beginning a new paradigm year by year. The previous assessments dose not run the gamut of industry but is confined within a certain facility or an area. Industrial processes and operations can not be accomplished independently but are connected with each others through suppliers and customer, and these ideas are fundamental notions of Life Cycle Assessment(LCA). This paper will introduce Life Cycle Assessment(LCA) n environment which is rising, and would like to build environmental management system using approach of Quality Function Development(QFD) and Safety Function Development(SFD) belonging to the assessment method.

현재 기업들 사이에 기업경영의 목표를 ‘고객 가치 경영’에 두는 경우가 많다. 이는 경영활동의 초점을 고객가치(Customer Value)에 두고, 데이터베이스 마케팅을 도입하여 ‘고객 마케팅’과 ‘One To One 마케팅’을 차별화 하려는 의지로 볼 수 있다. 고객 데이터를 조사 분석하기 위해서는 고객의 표현되는 욕구뿐만 아니라 잠재적인 욕구가지도 파악을 해야 한다. 고객의 데이터를 분석하는 방법에는 그 목적에 따라 고객 세분화 및 집단화 분석 모형, 고객반응확률을 예측하는 모형, 고객 이탈률을 분석하는 모형, 신규고객 발굴 분석 모형으로 분류할 수 있다. 따라서 본 연구에서는 비연결적인 상황의 한계성을 극복하기 위해 고객 분석에 필요한 변수를 먼저 선정하여, 고객 데이터의 신뢰도를 높이고, 고객 세분화를 정량적으로 분석하기 위해 CLV(Customer Lifetime Value)를 사용한 고객정보시스템을 설계하였다. 변수 사이의 유기적 복합성을 고려함과 동시에 어떤 새로운 변수를 도입해야 할 것인지에 대한 고민이 필요한 것이다. 또한 기업은 소비자의 다양화·복잡화 추세에 어느 정도까지 대응해 나갈 것인지도 결정해야 할 것이다. 이러한 이유로 기업에서의 CLV (Customer Lifetime Value)의 정립은 앞으로도 계속되는 과제가 될 것이다.

As environmental damage increase by a highly developed material civilization of today, many companies take a growing immensely interest in the influence of environment for beginning a new paradigm year by year. The previous assessments dose not run the gamut of industry but is confined within a certain facility or an area. Industrial processes and operations can not be accomplished independently but are connected with each others through suppliers and customer, and these ideas are fundamental notions of Life Cycle Assessment(LCA). This paper will introduce Life Cycle Assessment(LCA) in environment which is rising, and would like to build environmental management system using approach of Quality Function Development(QFD) and Safety Function Development(SFD) belonging to the assessment method.

우리나라에서는 일찍이 정부에 의해 품질관리(Quality Control)가 적극 추진되어져 범산업적으로 전개되어지고 있으며 선진각국의 ISO-9000 품질보증체제를 국내 KS 규격에 맞추어 국내 품질심사분야에의 본제도의 도입을 시행하여 생산현장의 근로자들 위주로 추진되어온 품질관리제도가 최고 경영진들을 비롯한 모든 종업원들이 참여하는 품질경영(Quality Management)체제로 바뀌어야만 하고 실정에 따라 정부에서도 선진회된 품질경영표준규격(ISO9000 시리즈, 국제표준화기구: 국제 무역 및 기술교류의 촉징을 목적으로 국제 규격을 제정 보급하도록 설립된 국제기구)을 도입하고 이를 전 산업에 확산․발전시키고자 ISO 9000시리즈를 한국의 산업 규격(KS9000)으로 채택하고 이 규격에 의한 품질 보증 시스템 인증 제도를 실시하고자 많은 노력을 기울였다. 그러나 2001년 새로은 ISO 규격이 국내 KS규격에 적용됨에 따라 약 2년이상의 시간이 지나도 국내 제조산업에서의 적용이 미비하다고 생각되는바 새로운 규격의 제조 현장의 도입의 시급함을 느끼며 광대한 KS규격 가운데 통계적 품질관리에서 사용되는 검정과 추정, 관리도, 샘플링, 실험게획법에 대하여 살펴보기로 한다.

A company wishes to obtain a competitive edge by adopting an efficient logistics information system to control the logistics management process. The elements of the competitive edges a company targets are to maintain good quality, reduce cost and on-time delivery and those competitive edges are closely related to the cycle time of a product. The logistics information system in a company is also closely tied with other business activities than the logistics itself. Therefore it is essential to choose a system that will help rationalize the logistics but also overall business operations along the supply chain from manufacturing to distribution of the products. This paper aims to research and analyze a problem with a logistics information system through case study and to suggest a logistics information system with RFID in place adopted to eliminate problems such as damages, loss and defect rates.

By successful establishment of Supply Chain Management System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making. Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models through the reflection of JIT system in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is to develop the most appropriate production system Model and optimal profit model in the process line and to provide the enterprises with the models which are based on the Supply Chain Management.

The compatibility of the enterprises of Korea was the 'low cost and mass production＆apos;. That in because, the entire business transactions including production, accounting, personnel management, and logistics need to be integrated with a global perspective. Logistics information system is to support the management of such logistics activities and involves in a wide range of the business operations. In other words, the logistics information system is 0 accurately and rapidly deliver and process the information available for the logistics in order to promote more smoother and efficient logistics by using such information. I'll give a brief introduction to the SRM(Supplier Relationship Management) system and go into the problem that should be considered and which phase to emphasize when building this system.

국내 반도체 산업은 불과 20년도 안되는 짧은 기간통안에 곽목할만한 성장을 하여 전세게 반도체 생산 규토 면에서 3위 국가로 부상하였으며, 기술 경쟁력 면에서도 한국인의 자존심을 그나마 지져왔다. 하지만, 반도체 제조는 가장 복잡한 제조공정의 하나로 분류되며, 이러한 복잡한 시스템을 통제하기 위해서는, 다양한 시스템 조건하에서 적절한 생산전략을 마련하는 것이 필요하다. 그러나, 반도체 제조 시스템에 대한 다양한 상황과 관련한 연구 많지 않다. 반도체 제

Supply chain management and e-procurement system built in the company, are set goal of internal process improvement. This paper show how SLV(Supplier Lifetime Value) can be used to structure the supplier in automotive part manufacturer, the method of selection is described and a detailed example of how SLV can be used and allocation of order Quantity for the selected suppliers also are provided, and aims at giving a method to realization profitable supplier relation using search for SL V system development which is making corporation with supplier, in the favor of decision supplier.

It is needed to develop on-line real time management and RFID-PPS(Radio Frequency Identification-Pallet Pool System) by putting information technology. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

Domestic city gas is supplying in an about 10 million household on present 34 city gas companies because is begun to supply regularly after two 1980 years middle. But, result that focus on city gas supply spread and stable supply for supply area and neglects about safety problem, hundreds casualties such as Ahyun explosion accident and Deagu city gas explosion accident were reached in situation that occurred large size calamity occurs it is dizzliness. In the case of advanced nation, can see that accomplish system and progress that in technology after experience major accident. Therefore, grasp problem investigating safety actual conditions for city gas institution and study about solvable plan is required this. Also, must guide reform and level elevation of a domestic company safety technology through induction and development of safety technology that is suitable in supply, domestic real condition etc. Must help in power positivity that is full text executing high-quality safety education about step High firing mechanism safety technology than present safety education.

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

Today, several manufacture enterprises are endeavoring constantly to receive order winners of subsidiary company product. There are tendencies to occupy competitive advantage in high position in price competition and in quality etc. But, it is not easy to keep it even if price has been cheap recently. Also, it is hard to be competitive advantage element more, because production smoothing was made much even if there is in quality. To keep or improve present competitive power, the due date rate is becoming importance. Several techniques with MRP, MRP II appeared in the 1970s by method to improve the these due date rate. These techniques have some defects to due date. Therefore, in this paper, MRP wishes to receive the due date rate that is improved more by supplementing having these defect by DBR of TOC.

Situation to develop Kyonggi Province area to universal tourist attraction area keeping in step with national large size event holding such as sun of Korean visit with opening a port of the In-chon International airport, the world ceramics Expo, World Cup was made up. Growth possibility is big to culture tourism resources and representative tourist resort of the Korea that use view of nature photon circle properly such as ceramics that target area possesses. Area development plan through growth possibility should be arranged to international ceramics production complex and distribution complex. Therefore, plan analyzing future district theme establishment and strength in priority via past and present of target area.

Last 2003, the CRM mayor was not lively glaringly. At beginning of the year, it may be said that gained result fewer than half of that is forecasted. Enterprises are seen that there are a lot of occasions that did not carry CRM project that planned very first time in practice or put off investment program until 2004 altogether. This can see that it is thing which CRM's accuracy of data analysis process drops up to now and investment of enterprises is unprepared. In this paper, It consolidates the necessity on a LTV (Life Time Value) and analyzes data which is concerned of Customer Value. Under the these environments, defines the LTV rule that can improve the customer value. And then, Scheduling plays an important role in shop floor planning. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem.